OSCAR Suggestions & Bug reporting

[booksfan]

Sorry, I haven't been on for a few days so I've just seen your reply.

I use a Flash SD card and FlashPap to import my data. As far as I know, the setup has always been the same,
1. Scan FlashAir SD card
2. Copy xPap data for selected date(s)
3. Exit and Run Tracking Software (I did change that from Sleepyhead to OSCAR)

Once OSCAR opens, I click on the CPAP importer as I have always done. Maybe I have directed it to the wrong location? But it doesn't look like it is labeled as a backup location.

I use FlashPap too; it is certainly useful. So C:/Users/...../Desktop/SLEEPyheadDATA is the name of your FlashPap directory?

I do see unusual messages about the period from Feb 2, 2018 through April 3,2018. But that's in the past and shouldn't affect today.

Is OSCAR consistently reporting AHI of 0.0? If you move back a day at a time, do you find a time when AHI was being reported correctly?

It is the name of the directory where the data is stored. OSCAR only reported AHI of 0.0 only the one day, May 21. Before and since, it has been reporting normally. There was a gap btw 2/21-3/13 (ish) when I was traveling and using my travel CPAP so no data and a few days when I was recovering from surgery and throwing up so I didn't use it around March 20-23. My AHI was all over the map for a few weeks then as well. Things are getting back to normal now, but not that good , which is why it kind of raised a flag for me when I saw the 0.0.

I apologize if I gave the impression it was an on-going issue.

[ClayL]

What do the two items in the bottom left of the left panel represent? The ones that say "3h 28m and 3h 56m" in the picture -

[NoOnesPerfect]

It means you turned the machine off and back on - those two times are the lengths of each session.

[ClayL]

Thanks. I forgot that I turned off to use the restroom.

[palerider]

Bonjour found out why you can't load new data for a day without deleting that day...

Because Mr Watkins just didn't give a f*.

Code: Select all

           auto rit = resdayList.find(date);
           if (rit != resdayList.end()) {
              // Already seen this record.. should check if the data is the same, but meh.   <---------=
               continue;
           } 

At least he was good enough to document that he didn't care.

[Dog Slobber]

Where does OSCAR save data? I had a mishap this morning and I want to save a copy before doing anything else.
I imported one oximeter file, commanded Rebuild, and OSCAR crashed. When I started it again, it acted like there was no data to display. Debug Pane mentioned it failed to read a summary file. I'll get details tonight.

If your using windows it’s in your Documents folder by default called OSCAR_Data

Same for Mac

[CaptPat]

Bug I think

I'm using a new Aircurve 10 VAUTO, on the leftmost pane of the OSCAR screen it indicates that Climate Control in is "manual," however on the machine itself, climate control is in AUTO.

[BlueDragon]

Bug I think

I'm using a new Aircurve 10 VAUTO, on the leftmost pane of the OSCAR screen it indicates that Climate Control in is "manual," however on the machine itself, climate control is in AUTO.

I would need to see one of the files on your SD card to investigate this problem. I'll send you a PM about which file would be most useful.

Thanks for the report.

[BlueDragon]

Bug I think

I'm using a new Aircurve 10 VAUTO, on the leftmost pane of the OSCAR screen it indicates that Climate Control in is "manual," however on the machine itself, climate control is in AUTO.

It looks like the labels are reversed. My AUTOSET is set to "manual" but is reported as "auto." I'll log this as an issue to be addressed.

[emcee13]

I’d like to suggest a side to side scroll feature. I have to look at the charts carefully because many of my type of events just won’t get flagged. It’s very difficult to do without a way to “scrub” through the charts. That’d be a very nice addition, unless there is already a way to do this(?). Keep up the great work!

[palerider]

I’d like to suggest a side to side scroll feature. I have to look at the charts carefully because many of my type of events just won’t get flagged. It’s very difficult to do without a way to “scrub” through the charts. That’d be a very nice addition, unless there is already a way to do this(?). Keep up the great work!

You mean like with the arrow keys?

[emcee13]

I’d like to suggest a side to side scroll feature. I have to look at the charts carefully because many of my type of events just won’t get flagged. It’s very difficult to do without a way to “scrub” through the charts. That’d be a very nice addition, unless there is already a way to do this(?). Keep up the great work!

You mean like with the arrow keys?

I read through the instructions throughly and didn’t see this as an option. Thankfully your “question” prompted me to just try the arrow keys. It worked after some fiddling with the graph size. Thanks!

[palerider]

I’d like to suggest a side to side scroll feature. I have to look at the charts carefully because many of my type of events just won’t get flagged. It’s very difficult to do without a way to “scrub” through the charts. That’d be a very nice addition, unless there is already a way to do this(?). Keep up the great work!

You mean like with the arrow keys?

I read through the instructions throughly and didn’t see this as an option. Thankfully your “question” prompted me to just try the arrow keys. It worked after some fiddling with the graph size. Thanks!

Sounds like something for the doc people

ps, up and down arrows zoom in and out on the charts.

[cacososa]

Hello
I would like to report a Bug

On the Welcome tab, the text with the information about the Last Usage statistic does not read well because the background is a light yellow and the text color is white. In order to see the text I have to highlight it, otherwise you can not see it. I'm attaching a screen shot

Regards.

CES

Screen Shot 2019-06-20 at 6.19.29 PM.png (543.9 KiB) Viewed 10505 times

[BlueDragon]

OSCAR does not support "dark mode" on the Mac. That's because the underlying development framework we use, QT, does not support dark mode. In the next release of OSCAR, we plan to include a workaround. Meanwhile, you should be able to read the messages if you set your Mac to use Light mode.

I would like to report a Bug

On the Welcome tab, the text with the information about the Last Usage statistic does not read well because the background is a light yellow and the text color is white. In order to see the text I have to highlight it, otherwise you can not see it. I'm attaching a screen shot