General Discussion on any topic relating to CPAP and/or Sleep Apnea.
-
wading thru the muck!
- Posts: 2799
- Joined: Tue Oct 19, 2004 11:42 am
Post
by wading thru the muck! » Thu Mar 23, 2006 2:23 pm
Titrator wrote:Hey Wader, can't wait to hear your take on the Comfortlite 2. Bring in on boy....
Most of the time I've spent with the CL2 has been while unconcious, so when I get a few minutes to actually look at it I'll post my opinions.
I will say that I used it the whole night, with only minor distractions... so far... so good.
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition):
wader
Sincerely,
wading thru the muck of the sleep study/DME/Insurance money pit!
-
th
- Posts: 300
- Joined: Fri Mar 25, 2005 4:27 pm
- Location: North Carolina
Post
by th » Thu Mar 23, 2006 3:11 pm
I have tried the CL2 about 30mins now. I have to say they really did a good job on this one. I think this might be a winner for them. I will get a full night with it tonight. I really got this one(CL2) for my wife (lh) since she cannot wear the Aura (too large).
I agree with RG, in that the small hose from the Activa really helps with this mask and I wish they would have included a CD(instructions) like ResMed does. The only thing I can tell now about the mask now is: The pressure the mask puts to my forehead. I have the feeling I might wake up with a sore spot on my forehead I will not know until the next morning This might be since the mask is brand new and needs a break in period,like a new pair of shoes.
I still like The aura for comfort but this mask has a lot of potential and I hope it works out for lh th
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition):
resmed,
activa,
hose,
Aura
-
Linda3032
- Posts: 2255
- Joined: Tue Nov 29, 2005 6:50 pm
- Location: Georgia
Post
by Linda3032 » Thu Mar 23, 2006 11:51 pm
TH, have your wife get some of those foam makeup pads for that pressure spot. They work great.
-
th
- Posts: 300
- Joined: Fri Mar 25, 2005 4:27 pm
- Location: North Carolina
Post
by th » Fri Mar 24, 2006 6:25 am
TH, have your wife get some of those foam makeup pads for that pressure spot. They work great.
Linda thanks, I will let her know. She wore the CL2 last night. She said she had no leaks and liked it. She said her nose was dried out this morning and she knew she did not have her humidifier on. I noticed she only had about 1/8 inch of water in the tank also. I am glad she likes the mask. The only mask she has been using was the somnoplus. This gives her a mask she can rotate out with.
th
report from encore pro last night
AHI 2.6
A. Leak 29.53
remstar auto cflex 7-14
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition):
humidifier
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition):
humidifier
Last edited by
th on Fri Mar 24, 2006 6:39 am, edited 1 time in total.
-
Sleepless on LI
- Posts: 3997
- Joined: Mon May 30, 2005 6:46 pm
- Location: Long Island, New York
Post
by Sleepless on LI » Fri Mar 24, 2006 6:29 am
For anyone that's used it so far, have you noticed an improvement as far as rainout as compared to the Aura?
L o R i

-
wading thru the muck!
- Posts: 2799
- Joined: Tue Oct 19, 2004 11:42 am
Post
by wading thru the muck! » Fri Mar 24, 2006 7:24 am
Sleepless on LI said For anyone that's used it so far, have you noticed an improvement as far as rainout as compared to the Aura?
Two nights using the CL2 and I'm still withholding judgement, but to answer your question, I will say, as compared to the Aura... absolutely zero rainout. <smile>
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition):
rainout,
Aura
Sincerely,
wading thru the muck of the sleep study/DME/Insurance money pit!
-
John57b
Post
by John57b » Fri Mar 24, 2006 7:49 am
I am also withholding my judgement however I found some differnces as compare to the Swift but I want to make sure the results are repeatable and have constancy. I will be trying out he pillows option shortly.
-
ozij
- Posts: 10432
- Joined: Fri Mar 18, 2005 11:52 pm
Post
by ozij » Fri Mar 24, 2006 9:39 am
All those witheld judgements, gosh, this is turning into a cliffhanger!
OK, I'll wait patiently - I appreciate your thoroughness
O.
-
Guest
Post
by Guest » Sun Mar 26, 2006 11:01 pm
Ted,
For those of us who do not have the Activa, what would be the order numbers and costs for the swivel connectors and the short connector tube from the Activa that Rested Gal mentioned to improve the Comfort Lite 2?
-
Titrator
- Posts: 580
- Joined: Tue Aug 24, 2004 1:58 pm
- Location: Oak Ridge, TN
Post
by Titrator » Sun Mar 26, 2006 11:15 pm
The Resmed Vista Inlet Hose and Swivel Connector will work for the CL2 modification that RG and I have used.
Here is the link for the Inlet Tube with Swivel Assembly for Mirage Vista Mask.
https://www.cpap.com/productpage/resmed ... -mask.html
I use the same setup with the Inlet Tube with Swivel Assembly for Mirage Vista Maska on my CL2.
Ted
-
ozij
- Posts: 10432
- Joined: Fri Mar 18, 2005 11:52 pm
Post
by ozij » Mon Mar 27, 2006 12:32 am
From that page:
Resmed products can only be shipped to locations within the United States.
O.
-
wading thru the muck!
- Posts: 2799
- Joined: Tue Oct 19, 2004 11:42 am
Post
by wading thru the muck! » Mon Mar 27, 2006 2:18 am
Titrator wrote:The Resmed Vista Inlet Hose and Swivel Connector will work for the CL2 modification that RG and I have used.
Here is the link for the Inlet Tube with Swivel Assembly for Mirage Vista Mask.
https://www.cpap.com/productpage/resmed ... -mask.html
I use the same setup with the Inlet Tube with Swivel Assembly for Mirage Vista Maska on my CL2.
Ted
Ted,
Did you replace the 90 degree elbow on the CL2 or just fasten to it with your modification?
Sincerely,
wading thru the muck of the sleep study/DME/Insurance money pit!
-
sleepyred
- Posts: 619
- Joined: Tue Aug 23, 2005 4:57 pm
- Location: Georgia
Post
by sleepyred » Mon Mar 27, 2006 5:15 am
Which interfaces is everyone whose bought choosing?
Pillows and cushions or
dream seal or simple cushions?
What are the differences between the three?
Wish we could get all three!
Those of you without rainout with your Aura - what is hour Humidity level set on? With my heated hose, I can push my humidity up to a 3 on my breeze and 4 on my activa.
_________________
Mask | |
 |
Additional Comments: Aussie Heated hose for rain out/PapCap Headgear and chin strap |
-
rested gal
- Posts: 12881
- Joined: Thu Sep 09, 2004 10:14 pm
- Location: Tennessee
Post
by rested gal » Mon Mar 27, 2006 5:36 am
Did you replace the 90 degree elbow on the CL2 or just fasten to it with your modification?
Not answering for Ted, but all I did was attach the Activa's short hose directly to the swivel elbow on the ComfortLite. I didn't remove anything from the CL2.
I think Ted (who thought of it first) did the same - fastening the short hose directly to the elbow on the CL2. Only, I believe he uses two swivel connectors -- one on each end of the short connector hose.
I didn't have an extra swivel connector, so my short connector hose has just the one swivel that comes with the Activa's hose. I fastened the swivel end of the Activa hose to the main air hose. Works fine. Certainly a LOT better than connecting the main air hose directly to the CL2's big elbow.
The Vista and the Activa both use the same short hose...a handy little thing.