hello from Italy,help me please
hello from Italy,help me please
ciao,
per favore mi potete aiutare a trovare manuale in questo forum per la comprensione dei dati del software ENCORE PRO 1.8.69?
sorry for my english,
thx
Don Pino
per favore mi potete aiutare a trovare manuale in questo forum per la comprensione dei dati del software ENCORE PRO 1.8.69?
sorry for my english,
thx
Don Pino
Re: hello from Italy,help me please
if you can post screen shots of your data (the graphs that start usually about page 4) someone can comment on them
Re: hello from Italy,help me please
I think this might help...popotti wrote:ciao,
per favore mi potete aiutare a trovare manuale in questo forum per la comprensione dei dati del software ENCORE PRO 1.8.69?
sorry for my english,
thx
Don Pino
viewArticle/Encore-Pro-Respironics-CPAP ... Derek.html
_________________
| Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: Rescan 3.10 |
Re: hello from Italy,help me please
[quote = "Jules"] se e possibile inviare screenshot dei vostri Dati (i Grafici Che SI aprono di circa Solito pagina 4) qualcuno puo commentare su di Loro [/ quote]
come fare screenshot con il PDF? [/ B]
indice mediorussamento
58,6
Indice medio apneaostruttiva0, 8
Indice medio ipopnea0, 9
Perdita max media71, 9
Perdita media del 90%
46,3
Perdita media40, 3
CPAP
15,0
Perdita consi media0 min
AHI medio1, 7
come fare screenshot con il PDF? [/ B]
indice mediorussamento
58,6
Indice medio apneaostruttiva0, 8
Indice medio ipopnea0, 9
Perdita max media71, 9
Perdita media del 90%
46,3
Perdita media40, 3
CPAP
15,0
Perdita consi media0 min
AHI medio1, 7
Re: hello from Italy,help me please
well, thx
Re: hello from Italy,help me please
up please, help me
Re: hello from Italy,help me please
Welcome to the forum.
Overall, your report looks very good.
Your AHI is excellent.
Your leak line is a little erratic, but still pretty good.
Your snoring is a little high, but that may come down with time. If you're not doing nasal cleansing before bedtime, you might try that. Nasal stuffiness can increase snoring.
Best wishes.
Den
Overall, your report looks very good.
Your AHI is excellent.
Your leak line is a little erratic, but still pretty good.
Your snoring is a little high, but that may come down with time. If you're not doing nasal cleansing before bedtime, you might try that. Nasal stuffiness can increase snoring.
Best wishes.
Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: hello from Italy,help me please
Literal translation of his Italian message
Please I want to find a manual on this question forum for the compression of software data for encore pro 1.89.69.
Does that help anyone...I have picked up a smattering if Italian and speak both english and french. Hope someone can help him.
Nan
Please I want to find a manual on this question forum for the compression of software data for encore pro 1.89.69.
Does that help anyone...I have picked up a smattering if Italian and speak both english and french. Hope someone can help him.
Nan
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Started cpap in 2010.. still at it with great results.
Re: hello from Italy,help me please
thanks for your reply,Wulfman wrote:Welcome to the forum.
Overall, your report looks very good.
Your AHI is excellent.
Your leak line is a little erratic, but still pretty good.
Your snoring is a little high, but that may come down with time. If you're not doing nasal cleansing before bedtime, you might try that. Nasal stuffiness can increase snoring.
Best wishes.
Den
What can I do to better understand the leak? the snoring is possible because I have bad Nasal deviation ?
thx
giuseppe
Re: hello from Italy,help me please
Popotti,
That leak rate is very high. You should be abale to hear the air escaping. Can you hear a difference in the sound when you relocate the mask to give you some hints?
Gerry
That leak rate is very high. You should be abale to hear the air escaping. Can you hear a difference in the sound when you relocate the mask to give you some hints?
Gerry
_________________
| Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: ResScan v3.10, Contec CMS50-F wrist oximeter |
Gerry in Florida
Re: hello from Italy,help me please
Ideally, the leak line should be as flat as possible. However, there are lots of things that affect that, like mask type, mask fit, tossing and turning during the night, types of pillow used, and probably many others. These things are going to vary from night to night and if your overall leak number stays about where it's at, you'll be fine. If you get any "Large Leaks", they will appear in the upper part of that leak report where it says "PC". Even some occasional Large Leaks aren't necessarily "bad". Most of us get them from time to time. They usually occur when our mask becomes dislodged during deep sleep or some tossing and turning.popotti wrote:thanks for your reply,Wulfman wrote:Welcome to the forum.
Overall, your report looks very good.
Your AHI is excellent.
Your leak line is a little erratic, but still pretty good.
Your snoring is a little high, but that may come down with time. If you're not doing nasal cleansing before bedtime, you might try that. Nasal stuffiness can increase snoring.
Best wishes.
Den
What can I do to better understand the leak? the snoring is possible because I have bad Nasal deviation ?
thx
giuseppe
In my first year, I had some pretty large snoring numbers but very low AHI numbers.......so, in your case, as long as you're sleeping well and feeling good, I wouldn't worry about the snoring......unless you have a bed partner who complains about it. In any case, it is probably better than before you started therapy.
Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: hello from Italy,help me please
Not if he's in deep sleep. His overall leak number is not that bad and the machine will compensate for the leakage. He's still getting air and not having "Large Leaks". See how abruptly the leak lines go up and back down? That indicates to me that the person is probably sound asleep.gpk111 wrote:Popotti,
That leak rate is very high. You should be abale to hear the air escaping. Can you hear a difference in the sound when you relocate the mask to give you some hints?
Gerry
I've slept through some pretty horrendous leakage in my years of CPAP usage and never knew it happened until I looked at my reports in the mornings. I just make sure that my machine is configured to keep blowing air in the case of Large Leaks so I'll keep getting air to breathe. I don't want some alarm waking me up out of a sound sleep.
Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: hello from Italy,help me please
Good points, Den.
I stand corrected.
Gerry
I stand corrected.
Gerry
_________________
| Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: ResScan v3.10, Contec CMS50-F wrist oximeter |
Gerry in Florida
Re: hello from Italy,help me please
Gerry,
I don't know if you realize this or not.
Respironics machines report the actual flow rate so many times it will be 40 or more depending on the pressure and mask.
Resmed machines report excess over the mask in the menu so we tend to see that line on people's reports at 24 (their magic .4 l/sec converted to l/min).
I don't know if you realize this or not.
Respironics machines report the actual flow rate so many times it will be 40 or more depending on the pressure and mask.
Resmed machines report excess over the mask in the menu so we tend to see that line on people's reports at 24 (their magic .4 l/sec converted to l/min).

[/url]