Those options relate to the machine turning on or off automatically.jaw wrote:I see two options: "Auto on" and "Auto off", what are they ?
With Auto On being set to the On position if you put the mask on and take a few breaths the machine will sense you are attached and it will start blowing without your having to push the button to start the machine. I have always utilized this feature on any machine I have used. ResMed has a similar feature.
With Auto Off being set to On....it's weird I know that off is on...if you remove the mask the machine will turn itself off once it senses you aren't attached...but it takes about a minute.
If it is set to off...the machine will blow after you remove the mask until you manually turn off the machine.
Now as to why you can't find the auto trial mode....it should be there along with the check mode and cpap mode.
I thought it was called auto trial mode. I haven't actually seen a 460/461 model machine.
I need to get the provider manual and check it out.
The only other thing that might be a factor for the absence of auto trial mode might be the "1" part of your model number. In the US the model number is 460. The 461 is supposed to be the same machine but marketed outside the USA. I wouldn't have thought that the machines marketed outside the USA would have different menu options or in this case the absence of auto trial mode.
If you highlight cpap mode...can you change it? If so what are the option choices?
Finally....if you aren't seeing many RERAs on your reports then I doubt that you are having very many Flow limitations. They sort of go hand in hand for the most part. It's rare that I have seen someone with low RERAs and high FLs. So if you don't have auto mode available (for some strange reason related the the "1") it probably isn't the end of the world.