SleepyHead 0.9.1 Official Beta Release

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
jedimark
Posts: 1300
Joined: Fri Feb 18, 2011 12:45 am
Location: Bundaberg, Australia
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by jedimark » Fri Jan 13, 2012 8:04 am

Haztek wrote:I have a question about updating from 0.9.1 to 0.9.2. I get a "failed" message and a note that "something went wrong with upzipping" and to manually install the update. How exactly do you manually install the update?
Thanks very much.
Haztek
Ugh.. What platform?

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS50D+/F Oximeter, S9 VPAP Auto/Adapt, PRS1 Auto, Intellipap Auto, SleepyHead :)
Author of the free, cross platform, open-source sleep tracking software SleepyHead.
Download http://sleepyhead.jedimark.net
Source Code http://gitlab.com/sleepyhead/sleepyhead-code

User avatar
robysue
Posts: 7520
Joined: Sat Sep 18, 2010 2:30 pm
Location: Buffalo, NY
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by robysue » Fri Jan 13, 2012 8:07 am

Breathe Jimbo wrote:
robysue wrote:I've got one bug to report: SH 0.9.1 and SH 0.9.2 both have a handful of days where each and every event got listed twice in the Events tab
That may be a residual problem left over from the transition from 0.9.0 to 0.9.1.
Except that on my EeePC, I went from 0.8.* to 0.9.1. And problem was there as soon as I imported the data into 0.9.1

On the Mac, the problem occurred with my first installation of 0.9. Of course that wasn't a completely clean install.
I experienced the same thing until I deleted my SleepyHeadData folder and subsequently used 0.9.1 to create a fresh profile and reimport all my data from my backup (NOT from the SH backup!). Something to do with the original compression scheme leaving duplicate .edf and .edf.gz files, for which the only solution was to wipe out all data and rebuild from scratch with 0.9.1 or 0.9.2. (Mea culpa; I jumped the gun with a premature release - dirty minds! - of 0.9.0.) It would be useful to know whether using 0.9.2 to delete the SleepyHeadData folder, create a fresh profile, and reimport data from a non-SH backup solves the duplicates problem for you. If so, then the bug has already been fixed but the problem appears to persist because the bug left you with messed-up data. If not, then your duplicates problem is not the same one that I had. The best way to determine whether it is the same problem is to test whether the solution that worked for me - i.e. delete the SleepyHead folder, create a fresh profile, and reimport data from a non-SH backup - works for you.
I'll try this on the mac when I get a chance to update it from 0.9.1 to 0.9.2. But as I said earlier, on the EeePC, the problem cropped up in the very first install of 0.9.1 without an existing 0.9.0.

Since it's the exact same days that are being duplicated on both my Mac and my EeePC, would it help to forward the data from my machine and let y'all know what days are being duplicated?

_________________
Machine: DreamStation BiPAP® Auto Machine
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: PR System DreamStation and Humidifier. Max IPAP = 9, Min EPAP=4, Rise time setting = 3, minPS = 3, maxPS=5

User avatar
squid13
Posts: 2301
Joined: Fri Jul 15, 2011 3:47 pm
Location: Pensacola, FL

Re: SleepyHead 0.9.1 Official Beta Release

Post by squid13 » Fri Jan 13, 2012 8:09 am

Mine failed to unzip to and I tried 3 times. Went to web site to download and it still list the old version. Where can you manually download the new version?

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV

User avatar
robysue
Posts: 7520
Joined: Sat Sep 18, 2010 2:30 pm
Location: Buffalo, NY
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by robysue » Fri Jan 13, 2012 8:18 am

jedimark,

Thanks for all the math geek stuff. If you'd like, I'd be happy to try to clean up the "poorly described" stuff in the wiki for you.
jedimark wrote:
A final observation: In SH 0.8.* the average, 90%, and max AHI/hour statistics were listed in the left sidebar along with all the other statistics. That row is missing in SH 0.9. Is that a conscious decision on your part or just an omission?
Someone suggested it was confusing for new users.. :-/
I kinda liked it because it indicated the severity of clusters.. (Which I get a lot of)
I think I'll add an option to add it back..
That's exactly why I miss the AHI/hour stats: I too was using it as a shorthand measure of cluster severity. I also find your AHI/hour graph much more useful than the one in ResScan that resets the AHI=0 at the top of every hour---some of my all-time worst clusters on the S9 occurred around the top of the hour and ResScan would reset that AHI back to 0 right in the middle of a cluster.

_________________
Machine: DreamStation BiPAP® Auto Machine
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: PR System DreamStation and Humidifier. Max IPAP = 9, Min EPAP=4, Rise time setting = 3, minPS = 3, maxPS=5

User avatar
Pugsy
Posts: 65112
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: SleepyHead 0.9.1 Official Beta Release

Post by Pugsy » Fri Jan 13, 2012 8:31 am

robysue wrote:You have it backwards, pugsy.
I won't copy the whole thing but this was in regards to the difference in VS #1 and #2 snores. I can't keep them straight. So sorry...when you have time would you add your explanation to the SH tutorial under construction thread and I will just refer back to it when I am trying to explain the snores...and we can use your explanation in the final tutorial? My math side of my brain goes on vacation when I try to explain the snores. I don't know why I can't keep it straight believe me I have tried. I will continue to try to work on it but it would help me a lot just to use your great explanation.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
jedimark
Posts: 1300
Joined: Fri Feb 18, 2011 12:45 am
Location: Bundaberg, Australia
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by jedimark » Fri Jan 13, 2012 8:43 am

robysue wrote:Since it's the exact same days that are being duplicated on both my Mac and my EeePC, would it help to forward the data from my machine and let y'all know what days are being duplicated?
absolutely.. Please do this..

Can you let me know your TimeZone too.. it might be part of the problem..

It might explain some duplicate sessions some ResMed users are having... (I've previously been pinning this down to a firmware glitch.. there might be more to it.)

I think it's session duplication.. I'm not sure how it's happening, especially for PRS1.. :-/

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS50D+/F Oximeter, S9 VPAP Auto/Adapt, PRS1 Auto, Intellipap Auto, SleepyHead :)
Author of the free, cross platform, open-source sleep tracking software SleepyHead.
Download http://sleepyhead.jedimark.net
Source Code http://gitlab.com/sleepyhead/sleepyhead-code

User avatar
Haztek
Posts: 28
Joined: Sun Jan 01, 2012 10:39 am

Re: SleepyHead 0.9.1 Official Beta Release

Post by Haztek » Fri Jan 13, 2012 8:46 am

jedimark wrote:
Haztek wrote:I have a question about updating from 0.9.1 to 0.9.2. I get a "failed" message and a note that "something went wrong with upzipping" and to manually install the update. How exactly do you manually install the update?
Thanks very much.
Haztek
Ugh.. What platform?
Windows 7

Thanks,
Haztek

_________________
Machine: AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Additional Comments: APAP 10.6-16- Sleepyhead Software

User avatar
jedimark
Posts: 1300
Joined: Fri Feb 18, 2011 12:45 am
Location: Bundaberg, Australia
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by jedimark » Fri Jan 13, 2012 8:56 am

Haztek wrote:
jedimark wrote:
Haztek wrote:I have a question about updating from 0.9.1 to 0.9.2. I get a "failed" message and a note that "something went wrong with upzipping" and to manually install the update. How exactly do you manually install the update?
Thanks very much.
Haztek
Ugh.. What platform?
Windows 7

Thanks,
Haztek

damn.. Sourceforge is a crappy host..

If you go into your SleepyHead directory under Program Files, there will be a download folder under it.. delete anything you see in there and try gain..

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS50D+/F Oximeter, S9 VPAP Auto/Adapt, PRS1 Auto, Intellipap Auto, SleepyHead :)
Author of the free, cross platform, open-source sleep tracking software SleepyHead.
Download http://sleepyhead.jedimark.net
Source Code http://gitlab.com/sleepyhead/sleepyhead-code

User avatar
Haztek
Posts: 28
Joined: Sun Jan 01, 2012 10:39 am

Re: SleepyHead 0.9.1 Official Beta Release

Post by Haztek » Fri Jan 13, 2012 9:10 am

jedimark wrote:
Haztek wrote:
jedimark wrote:
Haztek wrote:I have a question about updating from 0.9.1 to 0.9.2. I get a "failed" message and a note that "something went wrong with upzipping" and to manually install the update. How exactly do you manually install the update?
Thanks very much.
Haztek
Ugh.. What platform?
Windows 7

Thanks,
Haztek

damn.. Sourceforge is a crappy host..

If you go into your SleepyHead directory under Program Files, there will be a download folder under it.. delete anything you see in there and try gain..
I am not real computer literate..
I selected:
Computer
Local disc (c:)
Program files (x86)
Sleepyhead
There are .dll files, sleepyhead.exe, uns000.dat and a uns000.exe file.
Am I in the right place? I don't see a download folder under it.
Thanks,
Haztek

_________________
Machine: AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Additional Comments: APAP 10.6-16- Sleepyhead Software

User avatar
squid13
Posts: 2301
Joined: Fri Jul 15, 2011 3:47 pm
Location: Pensacola, FL

Re: SleepyHead 0.9.1 Official Beta Release

Post by squid13 » Fri Jan 13, 2012 9:16 am

In Program Files X86 there is no Download file in SleepyHead in my computer either. Windows 7Pro 64 bit.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV

User avatar
jedimark
Posts: 1300
Joined: Fri Feb 18, 2011 12:45 am
Location: Bundaberg, Australia
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by jedimark » Fri Jan 13, 2012 9:20 am

Haztek wrote:
jedimark wrote:
Haztek wrote:
jedimark wrote:
Haztek wrote:I have a question about updating from 0.9.1 to 0.9.2. I get a "failed" message and a note that "something went wrong with upzipping" and to manually install the update. How exactly do you manually install the update?
Thanks very much.
Haztek
Ugh.. What platform?
Windows 7

Thanks,
Haztek

damn.. Sourceforge is a crappy host..

If you go into your SleepyHead directory under Program Files, there will be a download folder under it.. delete anything you see in there and try gain..
I am not real computer literate..
I selected:
Computer
Local disc (c:)
Program files (x86)
Sleepyhead
There are .dll files, sleepyhead.exe, uns000.dat and a uns000.exe file.
Am I in the right place? I don't see a download folder under it.
Thanks,
Haztek
Hmm.. There should be two folders under there following an upgrade attempt..
Downloads & Backups.

Edit: might be something silly with windows account control stopping it from doing it.. Perhaps try right-click on the icon and "run as administrator" before trying to upgrade?

I'm not so up on windows anymore.. Been using Linux for a long time.. :-/

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS50D+/F Oximeter, S9 VPAP Auto/Adapt, PRS1 Auto, Intellipap Auto, SleepyHead :)
Author of the free, cross platform, open-source sleep tracking software SleepyHead.
Download http://sleepyhead.jedimark.net
Source Code http://gitlab.com/sleepyhead/sleepyhead-code

User avatar
Haztek
Posts: 28
Joined: Sun Jan 01, 2012 10:39 am

Re: SleepyHead 0.9.1 Official Beta Release

Post by Haztek » Fri Jan 13, 2012 9:33 am

Yes! It updated. Ran as administrator.
Thanks,
Haztek

_________________
Machine: AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Additional Comments: APAP 10.6-16- Sleepyhead Software

User avatar
squid13
Posts: 2301
Joined: Fri Jul 15, 2011 3:47 pm
Location: Pensacola, FL

Re: SleepyHead 0.9.1 Official Beta Release

Post by squid13 » Fri Jan 13, 2012 9:38 am

Thanks Haztek, I ran mine as Administrator also and it updated.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV

User avatar
jedimark
Posts: 1300
Joined: Fri Feb 18, 2011 12:45 am
Location: Bundaberg, Australia
Contact:

Re: SleepyHead 0.9.1 Official Beta Release

Post by jedimark » Fri Jan 13, 2012 9:48 am

Haztek wrote:Yes! It updated. Ran as administrator.
Thanks,
Haztek
Interesting.. I've got to learn how to make SleepyHead ask to elevate privileges during upgrade..

In any case.. This is a nifty workaround..

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS50D+/F Oximeter, S9 VPAP Auto/Adapt, PRS1 Auto, Intellipap Auto, SleepyHead :)
Author of the free, cross platform, open-source sleep tracking software SleepyHead.
Download http://sleepyhead.jedimark.net
Source Code http://gitlab.com/sleepyhead/sleepyhead-code

GTOJim
Posts: 194
Joined: Tue Feb 08, 2005 6:41 pm

Re: SleepyHead 0.9.1 Official Beta Release

Post by GTOJim » Fri Jan 13, 2012 1:44 pm

I also could not update until running as Administrator. Using Windows 7 64 bit.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Settings: EPAP 13.6, Max IPAP 18.4, P.S 4