Alright, I marked where I had the straps. I took a new cushion and started off very loose with the headgear and slowly tightened the top and bottom until it stopped leaking. It is very close to the tightness I had before, just a little looser.
I took the new cushion off and put the old one back on with the new tension. Immediately I notice that the silicone is floppier BUT does seal at that same tension. At this point I don't think it's the mask cushion as pointed out by Dog Slobber.
I do have a new theory and wouldn't mind some IRL advice again. Obviously our skin is constantly secreting oils, including overnight. Right now like every night, my skin from the soap is dry enough that regular tape would stick to it (basically no oils). In the morning my skin doesn't feel greasy but feels a tiny tiny bit clammy.
The New Theory:
Could the humidifier (on Auto) be too high and making my skin wet enough that the seal is breaking either from moving around or seeping in-between the seal at night?
If not, I have no idea and will just have to play around with the mask until I figure it out. Maybe as mentioned earlier it's just something unknown but dang it, I hate not being able to solve mysteries. I'm the kind of person that if I can't solve something it either goes in a drawer until I have the mindset to try again, throw it away, throw it at something and buy a new one, or have someone professionally fix it. Obviously none of those are an option for something that is helping my health so I will stick with it but OCD is frustrating.
Pressure Issue?
-
SyCoREAPER
- Posts: 59
- Joined: Sat Apr 04, 2020 1:33 pm
Re: Pressure Issue?
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
| Additional Comments: Note: (F30i not F30 mask) + Heated Tubing |
-
SyCoREAPER
- Posts: 59
- Joined: Sat Apr 04, 2020 1:33 pm
Re: Pressure Issue?
Anddd that seems to be the issue. Now how to solve it.
Woke up this morning with the little leak described, tried moving the mask around to no avail. Took it off, wiped the cushion and my face with a shirt I had next to the bed, put it back on and no leak and happily went back to sleep.
If anyone has any ideas please let me know. I was just going back to bed with the mask off because of the leak but after this morning feel so much more refreshed.
Woke up this morning with the little leak described, tried moving the mask around to no avail. Took it off, wiped the cushion and my face with a shirt I had next to the bed, put it back on and no leak and happily went back to sleep.
If anyone has any ideas please let me know. I was just going back to bed with the mask off because of the leak but after this morning feel so much more refreshed.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
| Additional Comments: Note: (F30i not F30 mask) + Heated Tubing |
-
SyCoREAPER
- Posts: 59
- Joined: Sat Apr 04, 2020 1:33 pm
Re: Pressure Issue?
My numbers are starting to be all over the place. So the question is, do I drop EPR to 1 or raise minimum to 15.2? Obviously changing one variable at a time is what to do, but not sure which one.
No caffeine, alcohol, constant bed time and wake up.
Thurs - 4.23
Fri - 2.17
Sat - 2.61
Sun - .27
Mon - 3.01
Tues - 4.52
No caffeine, alcohol, constant bed time and wake up.
Thurs - 4.23
Fri - 2.17
Sat - 2.61
Sun - .27
Mon - 3.01
Tues - 4.52
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
| Additional Comments: Note: (F30i not F30 mask) + Heated Tubing |
- Attachments
-
- 2.png (21.05 KiB) Viewed 298 times
-
- 1.png (74.29 KiB) Viewed 298 times
Re: Pressure Issue?
I would just increase the minimum. You get more of an overall change with a 1 cm increase in the minimum than a 1 cm change in EPR.
Plus you might need that EPR at the higher minimum more.
Plus you might need that EPR at the higher minimum more.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
