Sleepweaver Anew! My 1st impressions...YES!

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Stormynights
Posts: 2273
Joined: Wed Mar 10, 2010 7:01 pm
Location: Oklahoma

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by Stormynights » Sat Oct 26, 2013 5:15 am

I am a bad mask flip flopper. I will probably never be faithful to any mask. Night before last I tried to use my plastic FF mask, Quattro Air. I just never could get it to seal even though I have used it in the past. I gave up and used my Wisp. Last night I used my Anew and had no problem with the seal. I was very frustrated with the Anew when I first got it but after washing and getting it broken in it is working great. I just wish it came with the flexible short tube and had easier clips.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Mon Nov 04, 2013 4:59 pm

First post, seven year user. Got the sleepweaver anew four days ago. First night, was astonished at the level of noise from the mask. After washing, second night was not quite as loud, but still nearly unbearable. No leaks showing on SH software. Third night, was coughing every ten minutes. After two hours, had to go back to trusty old Quatro to get some sleep. Has anybody else had such a loud experience with the anew, and anybody have any suggestions to reduce the sound level? Thanks for any help.

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
Stormynights
Posts: 2273
Joined: Wed Mar 10, 2010 7:01 pm
Location: Oklahoma

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by Stormynights » Mon Nov 04, 2013 5:11 pm

It takes a few washings to get the inside fabric that touches your face softened up. I am not talking about soft to the touch I am talking about the difference in a new stiff pair of jeans and an old comfortable pair. I hope this makes sense.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Mon Nov 04, 2013 7:02 pm

Thanks. I'll give it several washings and keep trying. Was yours loud, at first?

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
Stormynights
Posts: 2273
Joined: Wed Mar 10, 2010 7:01 pm
Location: Oklahoma

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by Stormynights » Mon Nov 04, 2013 7:22 pm

glarnold wrote:Thanks. I'll give it several washings and keep trying. Was yours loud, at first?

GL Arnold
It was loud and wouldn't seal. I was very disappointed. I am so glad I kept working with it. That black fabric that touches your face was too stiff to mold to my face. Let me know how it works out for you.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Tue Nov 05, 2013 4:10 pm

Probably should mention, full beard and mustache. Trying again tonight.

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
bwexler
Posts: 1563
Joined: Mon Nov 08, 2010 11:52 pm
Location: San Marcos, Ca. USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by bwexler » Tue Nov 05, 2013 5:16 pm

Doesn't your facial hair prevent almost anything from sealing other than nasal pillows?

_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by chunkyfrog » Tue Nov 05, 2013 5:28 pm

Facial hair is better than stubble.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

SleepyToo2
Posts: 1005
Joined: Sun Sep 11, 2011 7:55 am
Location: North of Philadelphia, PA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by SleepyToo2 » Tue Nov 05, 2013 5:29 pm

bwexler wrote:Doesn't your facial hair prevent almost anything from sealing other than nasal pillows?
The designer of the Sleepweaver masks has apnea and a full beard. So the answer is probably no, provided you follow the instructions.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Use SleepyHead software.
Not a medical professional - just a patient who has done a lot of reading

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Wed Nov 06, 2013 8:57 am

Actually, the facial hair has prevented no sealing problems, no leaks.

Started with the "anew" last night and two hours in, was coughing uncontrollably. Had to sit up in chair for a couple hours, then back to my regular full face mask.

Looks like the anew is not going to work for me. DME said, no returns, no exchanges.

Has anyone else experienced lots of coughing with the Anew?

Thanks.

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
Stormynights
Posts: 2273
Joined: Wed Mar 10, 2010 7:01 pm
Location: Oklahoma

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by Stormynights » Wed Nov 06, 2013 10:00 am

The only thing I can think of is maybe the soap you washed it with. If it worked for you except for the coughing and you can't return it you might try washing again with a different soap and a lot of rinsing.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Wed Nov 06, 2013 11:33 am

Yeah, I thought about that, too. Using Woolite, same as for the other mask. And did about ten minutes of wash and ten minutes of rinse. Wanted to get it rubbed a lot.

Not sure if I want to go through that again, just to test that.

Thanks for the response.

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
Stormynights
Posts: 2273
Joined: Wed Mar 10, 2010 7:01 pm
Location: Oklahoma

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by Stormynights » Wed Nov 06, 2013 11:49 am

You could test it during the daytime just to make sure it won't make you cough. I can't see any reason for the design of the mask to cause coughing.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Wed Nov 06, 2013 3:35 pm

I'm thinking it could be an allergic reaction. Good idea to test it daytime. Thanks.

GL Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)

User avatar
glarnold
Posts: 84
Joined: Wed Sep 18, 2013 12:55 pm
Location: Bellevue, NE USA

Re: Sleepweaver Anew! My 1st impressions...YES!

Post by glarnold » Wed Nov 06, 2013 8:34 pm

May or may not be significant, but thought I would mention, I also use no humidifier, haven't for the seven years of use.

Gl Arnold

_________________
Mask: Quattro™ Air Full Face Mask with Headgear
Additional Comments: SleepyHead Software, PR System One BiPap Auto DS750 Machine Package With Bi-Flex (Discontinued)