Sleepyhead can't find data on SD card

I have seen many posts about a SleepyHead patch for the Mac, but haven't yet managed to find one. When I first hear of SleepyHead I found the 9.2-2 version for the Mac, and found it didn't read the data from my System One Remstar BiPap Auto 750P. After more searching I found a 9.2-3 version that read the data, but the graphs were all messed up. Then a few days ago I came across an unstable version that JediMark posted on Nov. 4th. This version of the SleepyHead software for the Mac works perfectly with my equipment. I found it at:
http://sourceforge.net/projects/sleepyh ... g/download

Have the same problem with the software. Imported and it shows my CPAP machine serial # but NO cpap machine data imported. Followed the patch directions rebooted and nothing changed. I have a PR system one 260P Running W7 64 bit. There is info on the sd card that I see when I open it looks like the nights I have used it but not able to get this to upload. Any suggestions will be appreciated. Need to make sure this data is being collected because my job requires it to be read from time to time to make sure I am in compliance.

BBBBurns wrote: I have a PR system one 260P Running W7 64 bit. There is info on the sd card that I see when I open it looks like the nights I have used it but not able to get this to upload. Any suggestions will be appreciated. Need to make sure this data is being collected because my job requires it to be read from time to time to make sure I am in compliance.

The PR System One model 260 doesn't gather any information other than how many hours you use the machine each night.
So there isn't any thing to upload with SleepyHead as it needs the other data files.
I thought it might give you hours of use only but maybe not.

So it will satisfy hours of use record keeping and generate a report in the Respironics Encore software which is what most doctors or DMEs will be using to check for compliance. They won't normally be using SleepyHead.
Who is it that is going to be monitoring your compliance? Employer? Machine supplier??? Do you have to provide a report yourself?
If you have to provide one yourself then you will need the Encore software if SleepyHead can't show you hours of use.

There is no longer any need to do the Patch for the 60 series for Windows users...SleepyHead version 0.9.3 build date May 2013 includes the Patch file with the install. So no extra work is involved.

Were you aware of the data availability limitations on this model machine? Do you want or need other data? If so you might want to see if you can get a model that offers additional data...next model up that would offer this added data would be the model 460.

You are going to likely need some version of the Respironics official software to get the reports you need now...either Viewer 2.1, Pro 2.12 or Basic.
Viewer 2.1 costs $100 from cpap.com.
The others are available if you know someone who can help you out...private message only.