Inserting CMS-50 Pulse-Ox Graphs into SleepyHead/OSCAR (rev6-2022)

jedimark wrote:

jdr999 wrote:

SleepyCPAP wrote:I'm digging up this thread to ask: do I understand that Sleepyhead on Macs can now import the CMS50 data without having to use Windows software?
(in other words, no Bootcamp or Parallels, etc? Just Sleepyhead.)

If so, I'm going to put one of those Pulse Ox devices on my Christmas wish list. If not, I can wait.

--SleepyCPAP

I'm still unable to import my CMS-50F into SH Mac. It may depend which CMS you are looking at, but mine won't work. Still only Parallels....

Does it show up in System Report?

SleepyHead v0.9.4-2 (unstable)
Build Date: Nov 4 2013 16:59:13
Revision: 13be1d5 (unstable branch)

System Report
----------------------------
MacBook Air
13-inch, Mid 2013
Software OS X 10.9 (13A603)

CP2102 USB to UART Bridge Controller:

Product ID: 0xea60
Vendor ID: 0x10c4 (Silicon Laboratories, Inc.)
Version: 1.00
Serial Number: 0001
Speed: Up to 12 Mb/sec
Manufacturer: Silicon Labs
Location ID: 0x14200000 / 9
Current Available (mA): 500
Current Required (mA): 100

Console
-----------------
11/29/13 12:59:34.479 PM SleepyHead[416]: invalid drawable
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver: init
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::attach
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::probe
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::detach
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::attach
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::start - Registered for Power Management
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::start!
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::start - Found device at interface 0
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::setPowerState - Waking up
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::SelectInterfaces - BulkInput Pipe is 0xffffff8026aee400 on EP1
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::SelectInterfaces - BulkOutput Pipe is 0xffffff801d2d7f00 on EP1
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo - Part Number Found: 0x02
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo - UsbConfigurationDescriptor -
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .bLength = 9
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .bDescriptorType = 0x02
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .wTotalLength = 32
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .bNumInterfaces = 1
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .bConfigurationValue = 1
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .iConfiguration = 0
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .bmAttributes = 0x80
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::GetCP210xInfo .MaxPower = 50
11/29/13 12:59:39.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff802c328000)::start - Sucessfully loaded the driver
11/29/13 12:59:49.000 PM kernel[0]: com_silabs_driver_CP210xVCPDriver64::setPowerState(0x4bdd5b35c01b6ff3, 0 -> 1) timed out after 10164 ms
11/29/13 1:00:17.385 PM SleepyHead[416]: invalid drawable

Debug
----------------
257171: Debug: Calling oximeter->startImport()
257172: Debug: Starting startImportTimer
257172: Debug: Sending request code to CMS50 device
257172: Debug: Success at oximeter->startImport()
258181: Debug: Sending request code to CMS50 device
259183: Debug: Sending request code to CMS50 device
260186: Debug: Sending request code to CMS50 device
261188: Debug: Sending request code to CMS50 device
262197: Debug: Sending request code to CMS50 device
263199: Debug: Sending request code to CMS50 device
264202: Debug: Sending request code to CMS50 device
265216: Debug: Sending request code to CMS50 device
266217: Debug: Sending request code to CMS50 device
267231: Debug: Sending request code to CMS50 device
268235: Debug: Sending request code to CMS50 device
269241: Debug: Sending request code to CMS50 device
270252: Debug: Sending request code to CMS50 device
271255: Debug: Sending request code to CMS50 device
272264: Debug: Sending request code to CMS50 device
273273: Debug: Sending request code to CMS50 device
274274: Debug: Sending request code to CMS50 device
275287: Debug: Sending request code to CMS50 device
276288: Debug: Sending request code to CMS50 device
277298: Debug: Sending request code to CMS50 device
278300: Debug: Sending request code to CMS50 device
279312: Debug: Sending request code to CMS50 device
280319: Debug: Sending request code to CMS50 device
281321: Debug: Sending request code to CMS50 device
282326: Debug: Sending request code to CMS50 device
283330: Debug: Sending request code to CMS50 device
284339: Debug: Sending request code to CMS50 device
285341: Debug: Sending request code to CMS50 device
286350: Debug: Sending request code to CMS50 device
287352: Debug: Sending request code to CMS50 device
288369: Warning: QObject::disconnect: No such slot Oximetry::cancel_CheckPorts()
288371: Warning: QObject::disconnect: (receiver name: 'Oximetry')

All I know is it works fine in Parallels / XP / SPO2 Assistant...

Ideas?

jedimark wrote:The ResMed Oximeter is importing, the channels display just got left switched off in SleepyHead code.. I will look over that again.. Did I ask you to send me a copy of your S9's SD card with some oximetery data? Can you send me a reminder so I can look at it again.

I may have mentioned this but I don't see the ResMed option listed under oximetry preferences in the unstable mac build -- only CMS50.

jdr999 wrote:

jedimark wrote:The ResMed Oximeter is importing, the channels display just got left switched off in SleepyHead code.. I will look over that again.. Did I ask you to send me a copy of your S9's SD card with some oximetery data? Can you send me a reminder so I can look at it again.

I may have mentioned this but I don't see the ResMed option listed under oximetry preferences in the unstable mac build -- only CMS50.

ResMed imports automatically whenever data is recorded.. that selection dialog really doesn't do anything..