CPAP not working and lights flashing

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
busta1698
Posts: 1
Joined: Fri Feb 11, 2011 4:18 am

CPAP not working and lights flashing

Post by busta1698 » Fri Feb 11, 2011 4:30 am

Hi all,

Ive had my CPAP for 2 years and last night when I went to use it, it would not work. When I plugged it in, the lights started blinking and after about a minute it started making a beeping noise. By lights blinking, I mean that the on botton, ramp, moisture level knob etc. were all blinking continuously.

When I pushed the on button, nothing happened. The machine did not turn on. I opened up the flap to look at the display, and all it had was a triangle with a ! mark in it. Has anyone had similar problems? or know of a fix?

I had the CPAP in my truck during the day and the temp dropped to -20 deg C, so Im not sure if that had something to do with it.

Please let me know if there is a fix for this, or if anyones had similar problems.

Thank you

User avatar
basicinstinct911
Posts: 6
Joined: Thu Dec 16, 2010 9:19 pm
Location: Lake Charles, LA
Contact:

Re: CPAP not working and lights flashing

Post by basicinstinct911 » Fri Feb 11, 2011 6:04 am

you would need to state your make and model of cpap along with exactly how many lights and duration

_________________
MaskHumidifier
Additional Comments: S9 Elite, H5i, Resmed Swift FX, Resscan 3.10

User avatar
Pugsy
Posts: 65036
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: CPAP not working and lights flashing

Post by Pugsy » Fri Feb 11, 2011 6:15 am

viewtopic/t60112/Another-Medical-Advent ... links.html

Take a look at the above thread and scroll down till you see the image posted. It includes the triangle with exclamation mark. If that is your type of machine looks like some service is needed. Unsure if cold weather affects it. Was there any water in it?

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
GumbyCT
Posts: 5778
Joined: Fri Sep 14, 2007 6:22 pm
Location: CT
Contact:

Re: CPAP not working and lights flashing

Post by GumbyCT » Fri Feb 11, 2011 6:22 am

busta1698 wrote:Hi all,

Ive had my CPAP for 2 years and last night when I went to use it, it would not work. When I plugged it in, the lights started blinking and after about a minute it started making a beeping noise. By lights blinking, I mean that the on botton, ramp, moisture level knob etc. were all blinking continuously.

When I pushed the on button, nothing happened. The machine did not turn on. I opened up the flap to look at the display, and all it had was a triangle with a ! mark in it. Has anyone had similar problems? or know of a fix?

I had the CPAP in my truck during the day and the temp dropped to -20 deg C, so Im not sure if that had something to do with it.

Please let me know if there is a fix for this, or if anyones had similar problems.

Thank you
That sounds serious as in "Call your DME" serious. But right now it sounds like toast.

Did you forget to empty the water chamber before moving it? That is the most common failure mode when traveling. You do know how OSA impacts our memories, right?

More clues will be needed for a better WAG.

_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: New users can't remember they can't remember YET!
BeganCPAP31Jan2007;AHI<0.5
I have no doubt, how I sleep affects every waking moment.
I am making progress-NOW I remember that I can't remember
;)
If this isn’t rocket science why are there so many spaceshots?
Be your own healthcare advocate!