Oxygen concentrators - some questions
Re: Oxygen concentrators - some questions
Thanks for the reply. I'm using a heated hose so that there cannot be a non electrical connective device between the hose and the humidifier. I will look further and see if Respironics makes a suitable device that can accomodate the heated hose. BTW, all of the adapters I have seen so far that go on the humidifier end, disable the autostart functionality because they seem to be a one way valve type device
_________________
Mask: Oracle HC452 Oral CPAP Mask |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV |
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
Re: Oxygen concentrators - some questions
Some masks have O2 ports built in. Check with your doctor of the possibility of your going on O2 during the day. If the answer is yes, then renting is the way to go. They will provide all supplies and supplemental O2. The supplemental O2 can be helpful during a power outage. You can use battery power for the XPAP, but the O2 concentrator is a different story.
Steve
Steve
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: Mirage™ FX Nasal CPAP Mask with Headgear |
Additional Comments: S9 Autoset w/H5i and Climitline hose, Sleepyhead and EncorBasic software |