AHI = 7 [updated 6/24/14]

palerider · Post by **palerider** » Mon Jun 23, 2014 5:22 pm

Pugsy wrote:
palerider wrote:the fact that his max pressure setting is 13, and his median, 95% and max observed are all 13 also says to me that the machine would like more top end, yes?
What does it hurt to take a few nights to get there?

wise words, just as I've come to expect from you

nfrederick86 · Post by **nfrederick86** » Mon Jun 23, 2014 5:33 pm

I'll set the min/max at 9/14 and see how that works for me.

Stevoreno_55 · Post by **Stevoreno_55** » Mon Jun 23, 2014 6:41 pm

Those are some cool graphics on your data. What kind of software are you using? Is it a free version or what came with your machine? I found out last weekend when I received my titration report in the mail that I'll me making the move from a CPAP to a BIPAP due to a pressure increase.

Stevoreno_55
MS Gulf Coast
06/23/14

Guest · Post by **Guest** » Mon Jun 23, 2014 7:28 pm

SleepyHead, just google it, its free.

palerider · Post by **palerider** » Mon Jun 23, 2014 7:51 pm

Stevoreno_55 wrote:Those are some cool graphics on your data. What kind of software are you using? Is it a free version or what came with your machine? I'll me making the move from a CPAP to a BIPAP due to a pressure increase.

tha'ts sleepyhead, nothing comes with the machines, sleepyhead is free. read the top post stickied on the forum, pugsy's pointers about sleepyhead.

there's no reason to have a sad face about a BILEVEL machine.

Stevoreno_55 · Post by **Stevoreno_55** » Mon Jun 23, 2014 8:01 pm

palerider wrote:
Stevoreno_55 wrote:Those are some cool graphics on your data. What kind of software are you using? Is it a free version or what came with your machine? I'll me making the move from a CPAP to a BIPAP due to a pressure increase.
tha'ts sleepyhead, nothing comes with the machines, sleepyhead is free. read the top post stickied on the forum, pugsy's pointers about sleepyhead.

there's no reason to have a sad face about a BILEVEL machine.

I posted the sad face because right now it looks like my DME will be issuing me a "fixed" BIPAP machine instead of an "auto" BIPAP machine after so many members on this board have previously stated that I should try and get an "auto" machine. That's the reason for the face. About that free software; what kind of an OS will I need on my computer to make it work? Will an OS of WIN Vista be fine or will I need a more updated OS like WIN 7 or WIN 8?

Stevoreno_55
MS Gulf Coast
06/23/14

Pugsy · Post by **Pugsy** » Mon Jun 23, 2014 8:13 pm

Stevoreno_55 wrote: About that free software; what kind of an OS will I need on my computer to make it work? Will an OS of WIN Vista be fine or will I need a more updated OS like WIN 7 or WIN 8?

SleepyHead works just fine on Windows Vista. No need to do anything with your computer.

DavidCarolina · Post by **DavidCarolina** » Tue Jun 24, 2014 6:38 am

Julie wrote:But what about leak rate data, etc?

yup, we ALL leak, especially episodically, but newbies especially dont realize how much bad
data is caused not by system or pressure setting but by LEAK rate.

nfrederick86 · Post by **nfrederick86** » Tue Jun 24, 2014 6:56 am

Well I bumped it up to 9/14 and this morning my AHI was 5 so we are making progress. I'll post the data once I get home from work.

nfrederick86 · Post by **nfrederick86** » Tue Jun 24, 2014 5:08 pm

Here is last nights data after bumping it up to 9/14 from 6/13

Pugsy · Post by **Pugsy** » Tue Jun 24, 2014 5:29 pm

Might as well do the 10 minimum and 15 maximum and see what happens. That should get you closer to what we would like to see. After that if further increases are warranted I would do 0.5 cm at a time and probably suggest giving each setting 3 or 4 days to establish a pattern. When we get close like you are getting...I like to go up in even smaller increments and give the settings 3 or 4 days (at least) to see how things trend. It is possible to have fluke bad nights (been there and done that often myself) and we could easily be chasing our tails if we continually make changes and those changes are based on random fluke "off" nights. That's why we say to give a change a few nights to make sure what we are seeing isn't a fluke bad night.

Up to you of choice how you want to proceed though.

Pesser · Post by **Pesser** » Tue Jun 24, 2014 5:42 pm

Did you wake up at 5:00AM and then fall back asleep?

nfrederick86 · Post by **nfrederick86** » Tue Jun 24, 2014 5:43 pm

I'll do the 10/15 and do that for a few nights and keep everyone posted.

Thanks for all the help/advice.

jargon113 · Post by **jargon113** » Mon Sep 08, 2014 11:22 pm

I would just like to let everyone know that the user nfredrick86, bought my CPAP, and paid for half.. and never paid for the other half. I don't know what to do about it other than to let everyone know not to deal with him or help him because he is a lying ass hole.

Nathaniel Frederick
<Address removed my moderator>

This is where I shipped it to. If anyone has any suggestions it would be appreciated. He hasn't paid the other half for the unit ($125) in a few months.

Day_Dreamer · Post by **Day_Dreamer** » Tue Sep 09, 2014 11:57 am

While I am no criminal mastermind, I find it odd that he would post a picture of himself if he had intentions of robbing you. He has probably fallen on hard times. Thou that's no excuse for stiffing someone

Machine	Mask	Humidifier

Additional Comments: Fear of devil with halo

AHI = 7 [updated 6/24/14]

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7

Re: AHI = 7 [updated 6/24/14]

Re: AHI = 7 [updated 6/24/14]

Re: AHI = 7 [updated 6/24/14]

Re: AHI = 7 [updated 6/24/14]

Re: AHI = 7 [updated 6/24/14]

Re: AHI = 7 [updated 6/24/14]

Mask

Additional Comments: Newly diagnosed pressures as of June 05, 2014 are 22cmIPAP and 18cmEPAP; first diagnosed with OSA in 1999.