SleepyHead 0.9.6 Pre-Release thread..

[SleepyCPAP]

This build is also built with the new Qt5.3.. I'm interested in knowing whether this will work correctly on OSX10.6.

Hi Mark,

I'm running it on OSX10.6.8.

Most of the things I'd reported for the previous builds are still there, but it is running stable as far as I can tell.

The new glitch of not having data for days where there are not a full set of .001 and .002 files is too bad. I have a few days with just .002 files, from before my old machine was firmware updated.

--SleepyCPAP

[Mykale]

Looks like you need to include MSVCR120.dll.

"The program can't start because MSVCR10.dll is missing from your computer. Try reinstalling the program to fix this problem."

...

I can confirm the same behavior on my Win 7 64 bit machine. I also have all the latest patches...

[archangle]

I think Mark just forgot to include msvcr120.dll in the package. I think it's a file used by the Microsoft compilers. Mark doesn't see it when he runs SH because it gets installed into windows when you install the compiler. I presume he'll add it into the package shortly.

[archangle]

If I import more than one data files from my S9, I get a crash on the second import operation. The first import is OK, the second one crashes.

It appears to import the data correctly on the second import operation, but crashes afterwards. It gets up to 99% on the data on the progress bar, then dies.

I save my S9 card data to my PC every time I import, so I have a bunch of directories like c:\s9\140622, 140610, etc. I can import one of these and no crash, but the second one fails. Once I restart, I can import the next one, but it will crash if I report a second one.

Windows 7 x64, SleepyHead-20140623-Win32-0.9.6-testbuild-Qt5.3.0-Angle-ForVistaOrNewer, S9 Autoset.

It seems to do the same thing on Angle or Broken release versions.

[avi123]

Deleted

[archangle]

There's a discontinuity in the session times display in the overview pane. It seems to be related to the noon-to-noon session time choice and daylight savings time.

[archangle]

my laptop fills up with lots of viruses while spending time on this website. why?

cpaptalk or sourceforge?

We should probably start a separate thread to discuss this instead of debating it here.

[robysue]

Wanting to report another issue with 0.9.6 on my Mac OSX 10.8.5.

Hubby just had to send his card in for the second time for compliance. And I did back it up and load the data (correctly) into SH 0.9.6 before sending the card off.

Just for kicks, I decided to put a brand new blank SD card into hubby's PR System One Series 60 machine and let it copy data onto the new blank card. I then created a brand new TEST SH profile in both SH 0.9.3 (on a windows machine) and TEST SH profile in SH 0.9.6 (on my mac). And I then imported the new card's data into the new TEST profile on each machine.

In SH 0.9.3, I get all the daily data except the wave flow as usual:



In SH 0.9.6, I get summary data on the Statistics page, but this is what I see when I click on the same day's daily data:



When I look at the SD card's contents, there's a *.001 and a *.002 file (as expected), but no *.005 files.

Is this a NEW bug??

Should I report it to sourceforge too?

[squid13]

my laptop fills up with lots of viruses while spending time on this website. why?

What are you using for Anti Virus. I use Norton NIS and Malwarebytes and have never had a virus. Both run together OK.

[avi123]

Del

[Guest]

mark. let me know if you would like me to send you my 50F (new, Fw 3.7) which is the one that does not work. I saw your comment. I posted a ticket with some findings on sourceforge. i'd rather get it to work long term than return it (which is my next move). let me know if that would be useful/interest you. thanks again for the hard work.

[archangle]

Avi, please start a new thread for your virus problems and quit hijacking this thread. I'll be glad to give you the benefit of my ignorance on another thread.

Others, please quit adding to the problem by responding to his question on this thread.

[avi123]

Del

[archangle]

Thanks! Love the redline -- that would have been really helpful when I was suffering from major leaks (looking back, one of those nights I spent 69% of my time above the redline!).

I second robysue's question about whether you want issues reported here or through SourceForge.

ETA: Like this one:



Should be 12.0-14.0cmH2O -- this happens both on the Statistics and Daily tabs.

Here is fine, as I'm on a bug hunting mission to refine this version to perfection..
And that's exactly what I'm looking for.. I may need a data sample from you.. (I'll PM you about it)

I get similar results on my S9 AutoSet. Both on the details page, and on the statistics page under changes to prescription settings.

Hopefully, you still have a sample of my data from when I sent it before. (140507trim.zip)

[jedimark]

Looks like you need to include MSVCR120.dll.

"The program can't start because MSVCR10.dll is missing from your computer. Try reinstalling the program to fix this problem."

Details:

Both versions you just released for Windows.

http://sourceforge.net/projects/sleepyh ... p/download
http://sourceforge.net/projects/sleepyh ... p/download

Windows 7 64 bit.
Patches up to date, I think.

Damnit.. I used the WinDeploytQt tool rather than doing it manually..