Encore Pro 2

[holly23]

Hi, Thanks to all for all your info. I'm a newbie to 'pap and this board. After reading your post I think that I also need the software. How do I get it?

Thanks again. Best regards to all, Holly

[rocky999]

Could i get a link to the Encore Pro software too?

Thanks a lot for your help!

/Rodny

[Pugsy]

Rodny and Holly, check your PM box

[Sudsy]

Hello

I am looking for this software too.

Any chance for it also?

Thanks
Sudsy

[Sudsy]

I have windows vista 32 bit.

Sudsy

[Pugsy]

I have windows vista 32 bit.

PM sent.

[kneemeister]

I could not get the 64 bit version on EP2.5 to install on my toy Fry's $150 barebones nettop machine (MSI Wind Box Atom D510 1.66Ghz), but it installed over 2.4 perfectly on my i5 laptop.

As far as changes, the only ones that stood out were all on the DME side of things, It has a tick box; for example, to chose blower time or treatment time for compliance for instance. It mentioned changes to the Prescription screens in the notes, but I haven't messed with it enough to see any changes.

As an experiment, I have replaced Win 7-64 with Win 7-32 on the nettop and am downloading the 32 bit version now, i want to see if it will run on an Atom processor.

I

[M.D.Hosehead]

From a practical viewpoint for users on this board, Pro gives you access to the waveform, i.e. every breath. Viewer does not. IMO you don't absolutely need the waveform to regulate your therapy, but some people like to see everything that's going on. I'm considering Pro.

[digitaleagle]

Has anyone ever figured out why the wave forms do not always show up when you download them from the SD card to the computer unless you religiously do the download within minutes after you shut down the machine in the morning? If I download the data first thing when I wake up, I always get the wave data. If I wait an hour or two and then download it - it doesn't show up.

I have even taken the SD card out of the PR System One and waited an hour and it also doesn't show up. So it seems to be related to time somehow, (whether you leave the SD card in the CPAP or not)

I don't know if there is some program logic why this happens or if it is a bug. To me it is a bug as the data is still on the SD card.

I know there was a previous thread on this - but I was just curious if anyone else figured out why the program won't show the wave data consistently.

I LOVE reading my Wave data - it tells me a lot more information on what was going on that I wouldn't get if I didn't have it.

[dave01978]

Has anyone ever figured out why the wave forms do not always show up when you download them from the SD card to the computer unless you religiously do the download within minutes after you shut down the machine in the morning? If I download the data first thing when I wake up, I always get the wave data. If I wait an hour or two and then download it - it doesn't show up.

I have even taken the SD card out of the PR System One and waited an hour and it also doesn't show up. So it seems to be related to time somehow, (whether you leave the SD card in the CPAP or not)

I don't know if there is some program logic why this happens or if it is a bug. To me it is a bug as the data is still on the SD card.

I know there was a previous thread on this - but I was just curious if anyone else figured out why the program won't show the wave data consistently.

I LOVE reading my Wave data - it tells me a lot more information on what was going on that I wouldn't get if I didn't have it.

I have not experienced this yet, and sometimes i take it out the next night before turning in on for the night and its all there still

[Leadhead]

I have yet to see the wave forms. Are they only available using PR System One or will M Series generate them?

[Pugsy]

I have yet to see the wave forms. Are they only available using PR System One or will M Series generate them?

We don't get them. Our machines are too old.... M series won't generate what is need to get the flow reports.
We must upgrade the machine if we want them.

[Uncle mIlty]

I found a copy of Encore 2 (version 2.2.14.0) somewhere.
I installed it, and entered the first log in info ok and changed teh password as it requested. I used "password2"
When I try to log in I get this error message...

Specified arguement was out of the range of valid values.
Parimeter name: MaxWidth cannot be more than MInWidth

I have a WinXP sp3 computer with a Philips 23E monitor, a 23" LCD monitor. I tried changing the screen settings but that didn't help, it's set at 1920x1080 normally, but I really thought that the screen settings weren't the problem anyway. I was just grasping at straws. I can read the SD memory card fine with my computer and I up loaded a few file sets to http://www.hoolehan.com/onkor/ and did see results, but I am very new to looking at the data so want to use my own computer to start with.

I have a Philips REMstar Auto with A flex and a System one humidifer.

After my first year with the device I don't seem to be getting the same amount of rest I did a few months ago and I want to learn more about my "breathing profile" to see if I can work with the machine to get better results.

Any advice is welcome.

[Uncle mIlty]

It appears I have an issue with the MSSQL install. Sigh.
I know of no way to fix it except to format the hard drive and I'm not going to do that.

[Pugsy]

Did you try Encore Pro 2.4xx?
Have you considered trying a custom install and minor change to the SQL server name. This is what I had to do and it worked. I just added the number 2 when I got to that part. Easy change and since it was part of the install, the software finds it just fine.