ResScan -> 4.02

aqualama · Post by **aqualama** » Fri Dec 31, 2010 9:11 pm

Hello Uncle Bob, I just downloaded the ResScan program, however when I attempted to begin the download from my chip, it looks like a "Device" has to be added, and when I click on Select, it doesn't work and is grayed out. Also grayed out is the Start Download button. Any help would be great. Thanks I'm a new user and will see if I can find how to include my machine, etc. Aqualama

idamtnboy · Post by **idamtnboy** » Fri Dec 31, 2010 9:17 pm

aqualama wrote:Hello Uncle Bob, I just downloaded the ResScan program, however when I attempted to begin the download from my chip, it looks like a "Device" has to be added, and when I click on Select, it doesn't work and is grayed out. Also grayed out is the Start Download button. Any help would be great. Thanks I'm a new user and will see if I can find how to include my machine, etc. Aqualama

Please go into your profile settings (user control panel, upper left of the page) and fill in the equipment information. It's difficult to properly answer until we know exactly what equipment you are using. Thanks.

aqualama · Post by **aqualama** » Fri Dec 31, 2010 9:28 pm

OK, I filled out what my equipment is.

idamtnboy · Post by **idamtnboy** » Fri Dec 31, 2010 9:42 pm

aqualama wrote:OK, I filled out what my equipment is.

Thanks. I don't know your machine so can't directly answer. Until someone with the same machine answers do this. Try doing a search on your machine name and a couple of keywords like device and grayed out. I'm sure you aren't the first person with this problem. The answer may already be here somewhere.

Most people here prefer you list your equipment by spelling it out. Pictures are pretty but sometimes harder to read! Thanks.

Lizistired · Post by **Lizistired** » Fri Dec 31, 2010 9:46 pm

Your machine is a Respironics. ResScan is for Resmed machines.

aqualama · Post by **aqualama** » Fri Dec 31, 2010 9:59 pm

Now wasn't that easy. Too bad for me. Thanks for response tho.

Slinky · Post by **Slinky** » Sat Jan 01, 2011 6:46 am

Also, no PR/Respironics PAP w/Plus in the name is fully data capable. They are capable of providing ONLY compliance data, i.e. usage hours, etc. Nothing of any value to you, no Leak, AHI, etc. data. The Plus' are bottom of the barrel, entry level PAPs. If you have had it less than 30 days, take it back and insist on a Pro model. Good luck!

aqualama · Post by **aqualama** » Sat Jan 01, 2011 9:01 am

As I am just getting literate on all this, I stand corrected on what machine I have. I do have all the data and got a print out of it after my first 30 days. I'll just keep on learning here, and I changed the type of machine I have again. Thanks for that info tho.

cflame1 · Post by **cflame1** » Sat Jan 01, 2011 9:36 am

the only time that the PR's aren't data capable is when the PLUS doesn't follow CFLEX...

aqualama... you've got a PRO with CFLEX PLUS listed... if that's right then your machine is fully data capable. The software that you need is ENCORE PRO or ENCORE VIEWER.

hello om mind · Post by **hello om mind** » Sat Jan 01, 2011 2:57 pm

Hi uncle Bob,

Thank you so much for all the info on your site!
Just bought a S9 and would like very much to get the software that goes with it...
Thank you

feeling_better · Post by **feeling_better** » Mon Jan 03, 2011 5:24 pm

New to this thread. Read quite a few posts, but this is long thread Is there a place showing what devices are supported for download? Any usb devices? Does anybody know if 3.10 or higher support VPAP ST? There is some indication at the Resmed site that 3.x may suport that machine... Any users here? Thanks

tektrek68 · Post by **tektrek68** » Thu Jan 06, 2011 10:29 am

Thanks for the software

bigben · Post by **bigben** » Thu Jan 06, 2011 4:37 pm

Hi Uncle Bob! I downloaded the ResMed ResScan 3.12 on my computer, i'm with window 7 and it tell's me to find some pilots on the internet. Can you tell me how or can you send me the links to get them??? Thank you!!

om mind 111 · Post by **om mind 111** » Thu Jan 06, 2011 7:26 pm

Hi, I am wondering if someone could help me to download the rescan 3.12 software that people are talking about .

Thank you!!

im22sleepy · Post by **im22sleepy** » Fri Jan 07, 2011 1:09 am

I've been using cpap for nearly 6 months now--rocky journey. I am using the resmed s9 auto cpap machine with nasal pillow mask. I do not yet have the software (& software manual) to accompany and analyze my s9 cpap machine. Is the "resscan 3.12" the most recent software version for the s9?

Would anyone be able to help me with a link to download the resscan 3.12 software and manual? Is there anything else I need to review my cpap data? I'd really appreciate help to decipher the data stored on my remed's data card.

Many, many thanks-in advance.

ResScan -> 4.02

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.10 -> 3.12

Re: ResScan 3.12

Humidifier