Aussie Heated Hose

Pilot_Ron · Post by **Pilot_Ron** » Fri Dec 21, 2007 8:24 am

Does the hose fit pretty much every machine? I want to order it ahead of time so I have it when I get set up with a machine..

ozij · Post by **ozij** » Fri Dec 21, 2007 8:32 am

If you buy a Puritan Bennett 420E you will need a different hose, one with an internal pressure sensing tube threaded through it.

O.

NeedinZs · Post by **NeedinZs** » Fri Dec 21, 2007 8:34 am

My "guess" would be yes. It seems like the same size as standard hose fittings. You can ask or research at http://www.sleepzone.com.au

That's great that you're on top of things! It will make your ride a little smoother. Sounds like you have the right attitude to get started!

Good luck!

kevinjanko · Post by **kevinjanko** » Fri Dec 21, 2007 11:39 am

The hose fittings are standard size, will work on any machine. However, the power supply may not be compatible. You may have to purchase one that works with the hose. I use a PB 420E, the power supply is compatible, but is not powerful enough to power both the unit and hose, I had to buy a second power supply to drive the hose.

rested gal · Post by **rested gal** » Sat Dec 22, 2007 2:45 am

Pilot_Ron wrote:Does the hose fit pretty much every machine? I want to order it ahead of time so I have it when I get set up with a machine..

As for the rubber cuff fitting every machine...yes.

You've probably trudged through a good many of these topics, Ron. This link is for new readers:

LINKS to discussions about the Aussie heated hose - to prevent rainout
viewtopic.php?t=5305

Humidifier

Additional Comments: Remstar Auto A-Flex Aussie Heated Hose Auto 8-15 cm H2O pressure A-Flex 2 Backup Remstar Plus w/C-Flex

Aussie Heated Hose

Aussie Heated Hose

Aussie Heated Hose

Re: Aussie Heated Hose