OSCAR v1.1.0 is now Released!!

[BlueDragon]

I'm from Taiwan , but i can't download this soft

front page is shown as following :

Forbidden
You don't have permission to access this resource.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request."

When you click on https://www.sleepfiles.com/OSCAR/, do you see a web page showing the available downloads for Windows, Mac, and Linux? If so, which platform are you trying to download OSCAR for? Are you downloading from the English language page, or have you switched to a different language, and which one?

[ping0759]

I'm from Taiwan , but i can't download this soft

front page is shown as following :

Forbidden
You don't have permission to access this resource.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request."

When you click on https://www.sleepfiles.com/OSCAR/, do you see a web page showing the available downloads for Windows, Mac, and Linux? If so, which platform are you trying to download OSCAR for? Are you downloading from the English language page, or have you switched to a different language, and which one?

thanks for your response
i can see web page showing the available downloads for Windows, Mac, and Linux from https://www.sleepfiles.com/OSCAR/
When i clicked windows(7/8/9) icons for OSCAR-1.0.1-Win64 (my notebook is win64 bit ) by English , i can't open download page .

[BlueDragon]

i can see web page showing the available downloads for Windows, Mac, and Linux from https://www.sleepfiles.com/OSCAR/
When i clicked windows(7/8/9) icons for OSCAR-1.0.1-Win64 (my notebook is win64 bit ) by English , i can't open download page .

Is it really OSCAR-1.0.1-Win64 and not OSCAR-1.1.0-Win64? If it does say 1.0.1 instead of 1.1.0, then you are looking at an old page. Try clearing your browser cache and see if that helps show the right page. When you click on the link, your browser should offer to download the file for you. The link is to an installer file, not to another page.

In any event, you could try downloading directly from https://www.apneaboard.com/OSCAR/OSCAR-1.1.0-Win64.exe.

[ping0759]

i can see web page showing the available downloads for Windows, Mac, and Linux from https://www.sleepfiles.com/OSCAR/
When i clicked windows(7/8/9) icons for OSCAR-1.0.1-Win64 (my notebook is win64 bit ) by English , i can't open download page .

Is it really OSCAR-1.0.1-Win64 and not OSCAR-1.1.0-Win64? If it does say 1.0.1 instead of 1.1.0, then you are looking at an old page. Try clearing your browser cache and see if that helps show the right page. When you click on the link, your browser should offer to download the file for you. The link is to an installer file, not to another page.

In any event, you could try downloading directly from https://www.apneaboard.com/OSCAR/OSCAR-1.1.0-Win64.exe.

thanks again!
it still can't open download page , i think it's locked in Taiwan !

it's still shown followings :
「Forbidden
You don't have permission to access this resource.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.」

[BlueDragon]

In any event, you could try downloading directly from https://www.apneaboard.com/OSCAR/OSCAR-1.1.0-Win64.exe.

thanks again!
it still can't open download page , i think it's locked in Taiwan !

it's still shown followings :
「Forbidden
You don't have permission to access this resource.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.」

I'll see if I can find anything out about this. I didn't know Taiwan blocked internet traffic. Try right-clicking on the link to the installer and "save link as...". Do you get the same error?

[ping0759]

In any event, you could try downloading directly from https://www.apneaboard.com/OSCAR/OSCAR-1.1.0-Win64.exe.

thanks again!
it still can't open download page , i think it's locked in Taiwan !

it's still shown followings :
「Forbidden
You don't have permission to access this resource.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.」

I'll see if I can find anything out about this. I didn't know Taiwan blocked internet traffic. Try right-clicking on the link to the installer and "save link as...". Do you get the same error?

thanks a lot

"Try right-clicking on the link to the installer and "save link as...". Do you get the same error?"

i try it ! But it can't link.........

[BlueDragon]

"Try right-clicking on the link to the installer and "save link as...". Do you get the same error?"

i try it ! But it can't link.........

Could be lots of things causing this problem -- government restrictions (we don't know of any), your ISP, your browser security settings, and who knows what else? Can you download any program from any other website in the US? Do you have security settings that allows you to download executable files only from sites that have been approved by something?

If you send me a PM with your IP address, we can double check that the block is not happening in the ApneaBoard servers. (To get your IP address, type "get my ip" in the search bar for Google and it will report your IP address.)

[RPDM]

Hi Team
Thanks; y'all are awesome!

I have a DreamStation Go (500G110). In Oscar 1.01.1 the summary pressure graph was correct, showing min, median, 95% and max pressure on the overview tab. The prescription details were a bit funky, it showed max 0 for a couple of days after changing the minimum pressure setting
In Oscar 1.1.0 the prescription settings are fine now, no more 0 for max, however the pressure overview now only shows min / max, no longer the median and 95% pressure

Conversion went fine. I have also tried to reload my data from card to see if that resolves the pressure view... and it does not

again thank you!

[BlueDragon]

In Oscar 1.1.0 the prescription settings are fine now, no more 0 for max, however the pressure overview now only shows min / max, no longer the median and 95% pressure

Thank you for your report. This is a known problem. It will be fixed in version 1.1.1. (We don't have a timetable for that release yet, but it will be mainly to fix problems like this so shouldn't be too long.)

[Okie bipap]

I just converted over to the 1.1.0 release. When I did, my wife's data moved over with no problems. However, it would not convert my data properly. The program closed on me a couple times, and once I finally got it to work for my data, I had to reload all of my old data. When I did, it left out almost a year of data. I finally deleted my profile and reloaded everything. Luckily, I keep copies of everything and was able to reload almost five years of data into the program. Now, it appears to be working properly with my wife's data and mine.

[BlueDragon]

I just converted over to the 1.1.0 release. When I did, my wife's data moved over with no problems. However, it would not convert my data properly.

What machine does your wife use? Also an Aircurve or something else?

[Okie bipap]

We both use AirCurve 10 VAUTO. I've been on mine close to five years, and my wife has had hers for three years.

[DreamDiver]

I'm curious about apnea duration, duration trends and their effect on how we're progressing, maybe even how we feel.

I wonder if it would be helpful or useful to make that data available in the form similar to the stats for Channel | Min | Med | 95% | Max,
except we're taking the LL, CA, UA, OA, H, and RE and calculating for each: Event Type | Min | Med | 95% | Max.

Stats could be shown either in the Daily details subpanel below Statistics as Calculated Event Stats or on the Events subpanel before the lists of events. Stats for the same could be reflected in the Overview and Statistics pane.

The data would not be shown by default, but revealed by File -> Preferences -> Appearance -> Other Visual Settings -> Show Calculated Event Stats

Would it be relatively difficult or easy to implement, and would it be worth it? I ask because when I first started, I had a lot of apneas that were well over 20 seconds in duration, but now they're mostly 10 or 11 seconds in duration. I see a trend, and I'm wondering if it would be helpful for determining if someone has circumstances like apnea duration change related to REM, after eating or omitting certain foods, alcohol, etc.

It's an entirely experimental, anecdotal consideration. However, it might turn out to be useful for OSCAR users to possibly help get control over external sources/habits/actions that may affect apnea duration or frequency. CItizen Science!

What do you think?

Chris

[BlueDragon]

I'm curious about apnea duration, duration trends and their effect on how we're progressing, maybe even how we feel.

Duration is a slippery issue to work with. PRS machines, for example, do not report duration for events (even though duration was shown in earlier versions of SH and OSCAR, the number shown was not valid). ResMed S9 and Airsense 10 report hypopneas differently (S9 gives a number, Airsense 10 doesn't report a duration for hypopneas).

[DreamDiver]

Duration is a slippery issue to work with. PRS machines, for example, do not report duration for events (even though duration was shown in earlier versions of SH and OSCAR, the number shown was not valid). ResMed S9 and Airsense 10 report hypopneas differently (S9 gives a number, Airsense 10 doesn't report a duration for hypopneas).

Thanks for your reply, BlueDragon.

It's unfortunate that they would not report durations any longer on Respironics machines. Please forgive the furious intensity of my disappointment in Respironics, but for me that's yet another reason not to buy Respironics XPAP.

My AS10 for Her apparently reports durations for hypops. (See image below.) If most users buy the AS10 AutoSense and data are available, it seems to me expressing the data may make it worth the time to mine them.

Chris