It keeps me Awake

[zonker]

Hello, I have Resmed Airsense 10 Machine and use Resmed Airfit F20 LGE and when I put it on and try to go to sleep, it is too loud and like 2 hours after I put it on I am still awake. It is not from leaking air from where it contacts my face. I am about 2 days from unplugging this thing and letting it rot away on my night stand.

so, it appears that you have an autoset machine being used as cpap. you've indicated your minimum pressure is 20. so it follows that your maximum pressure is 20 as well. this means you are on a continuous fixed pressure, which isn't doing a bloody thing for you.

can you confirm for us, by looking in the machine, which machine you have?

here is a list to compare-

wiki/index.php/CPAP_models

tell us what you have because any info we can give you will be based on which machine it is.

if you are at a FIXED pressure of 20, i think that MAY be set too high.

oh! and as to the noise? do you have a humidifier on your machine? if so, check to make sure it is seated firmly in the machine.

good luck!!

[Palladini]

If someone tell me how to post a picture on this forum, I will do that and show you my machine. Right now I have a meeting to go to, I will be gone for few hours

[palerider]

Unless you wise up, you're just wasting EVERYBODY'S time.

could you narrow that down a bit? in which area does he need to "wise up"?

not being snarky, being curious.

I had every test Known to Mankind done to me

"every test Known to Mankind"

How they ever figured out a Pressure of 20,

Nobody gets a CPAP set to 20, not even in Canukistania.

If you view this Video, my Machine is the 3rd one he holds up - https://youtu.be/kxTBzi0mi14

Identifying machines based on a video, instead of just *reading the name off the machine*.

I drove Tractor Trailer for near 40 years, and have slept in a Moving Truck many times and I fell that was a quieter thing to do.

Ridiculous levels of hyperbole.

I remember at the CPAP sales place here in town he was surprised it was to be set to 20 And there is no Autoset, only ramp up time.

*where's the data?*

and she was pissed at me for outing them.

Yup, that happens all the time...

So far all there's been is *rant rant rant*, which equates to "I don't want this thing, and I'm looking for excuses to quit using it".

[zonker]

If someone tell me how to post a picture on this forum, I will do that and show you my machine. Right now I have a meeting to go to, I will be gone for few hours

when you respond to this, scroll to the bottom of your screen. you'll see 2 tabs. you want the one titled "attachments". press that and follow the instructions.

but wouldn't it be easier to look at the link i provided to choose which is yours?

[zonker]

Unless you wise up, you're just wasting EVERYBODY'S time.

could you narrow that down a bit? in which area does he need to "wise up"?

not being snarky, being curious.

I had every test Known to Mankind done to me

"every test Known to Mankind"

How they ever figured out a Pressure of 20,

Nobody gets a CPAP set to 20, not even in Canukistania.

If you view this Video, my Machine is the 3rd one he holds up - https://youtu.be/kxTBzi0mi14

Identifying machines based on a video, instead of just *reading the name off the machine*.

I drove Tractor Trailer for near 40 years, and have slept in a Moving Truck many times and I fell that was a quieter thing to do.

Ridiculous levels of hyperbole.

I remember at the CPAP sales place here in town he was surprised it was to be set to 20 And there is no Autoset, only ramp up time.

*where's the data?*

and she was pissed at me for outing them.

Yup, that happens all the time...

So far all there's been is *rant rant rant*, which equates to "I don't want this thing, and I'm looking for excuses to quit using it".

thanks.

[Palladini]

Here folks, I made a video of my machine - https://www.vidlii.com/watch?v=_et8ZkEJ47M
If Possible, I have the SD Card Out of the Machine, if anyone can tell me where to find the setting for the pressure on the machine and I will take a screenshot and put it up here.

[palerider]

Here folks, I made a video of my machine - https://www.vidlii.com/watch?v=_et8ZkEJ47M
If Possible, I have the SD Card Out of the Machine, if anyone can tell me where to find the setting for the pressure on the machine and I will take a screenshot and put it up here.

Step 1, learn to read.
Step 2. Read the front of the machine.

We'll wait.

[Palladini]

Here folks, I made a video of my machine - https://www.vidlii.com/watch?v=_et8ZkEJ47M
If Possible, I have the SD Card Out of the Machine, if anyone can tell me where to find the setting for the pressure on the machine and I will take a screenshot and put it up here.

Step 1, learn to read.
Step 2. Read the front of the machine.

We'll wait.

If you read the first post, I told you the Machine I have, but some folks do read that far.

[Palladini]

Hello, I have Resmed Airsense 10 Machine and use Resmed Airfit F20 LGE and when I put it on and try to go to sleep, it is too loud and like 2 hours after I put it on I am still awake. It is not from leaking air from where it contacts my face. I am about 2 days from unplugging this thing and letting it rot away on my night stand.

so, it appears that you have an autoset machine being used as cpap. you've indicated your minimum pressure is 20. so it follows that your maximum pressure is 20 as well. this means you are on a continuous fixed pressure, which isn't doing a bloody thing for you.

can you confirm for us, by looking in the machine, which machine you have?

here is a list to compare-

wiki/index.php/CPAP_models

tell us what you have because any info we can give you will be based on which machine it is.

if you are at a FIXED pressure of 20, i think that MAY be set too high.

oh! and as to the noise? do you have a humidifier on your machine? if so, check to make sure it is seated firmly in the machine.

good luck!!

The Machine I have has reference #37022 and is not found on that list.

[palerider]

Here folks, I made a video of my machine - https://www.vidlii.com/watch?v=_et8ZkEJ47M
If Possible, I have the SD Card Out of the Machine, if anyone can tell me where to find the setting for the pressure on the machine and I will take a screenshot and put it up here.

Step 1, learn to read.
Step 2. Read the front of the machine.

We'll wait.

If you read the first post, I told you the Machine I have, but some folks do read that far.

No you didn't, you've been ridiculously obstinate and refusing to tell us what you have. Are you just trolling?

Hello, I have Resmed Airsense 10 Machine and use Resmed Airfit F20 LGE

You allege that you

drove Tractor Trailer

so maybe this will make sense to you,
Someone asked you "what truck do you drive" and you, in effect said "A Pete", then they asked "which model?" and you keep saying "A Pete", either because you're lying about having driven a truck and don't know the difference in a 330 and a 389, or you're incapable of READING the plate on the truck, just like you're incapable of READING the name that's written right on the front of the alleged cpap.

You've been shown the list, it's *obvious* that there's more than one "Resmed Airsense 10" machine, because that is not a specific model, it's a lineup of four different machines, as shown on the list that you claim to have looked at.

Which *specific* model is it?

[Miss Emerita]

Palladini, I looked at your video, but it doesn't show what we are asking for. Could you just say what you see on the bottom right of the machine:

Airsense 10

or

Airsense 10
Autoset

These are two different machines with different capabilities, and we need to know which one you have.

To see exactly what your pressure setting is, go into the clinical menu by holding down the knob and the home button for several seconds. Tell us what pressure settings you see there. Be sure to exit the clinical menu when you are done.

[chunkyfrog]

Watch a video?--no, thank you.
I have enough garbage on my tablet already.
To prove you are not a TROLL, USE YOUR WORDS.
We would like to HELP you.
Stop fighting cpap--look closely at the screens and figure out your real settings.
Look at the machine, the model name is RIGHT ON THE FRONT.

[zonker]

The Machine I have has reference #37022 and is not found on that list.

you have the most remarkable ability to see only one specific sentence out of anything one types at you.

as to the reference #, you are quite correct, it's not on the list.

and with that, i withdraw and put you on my foe list. it's very aggravating to try to help you and you doing the least you can in response.

good day.

[chunkyfrog]

Likewise, I have added his name to my foes list.
I plan to peek now and then to check if anything we have said
has made a dent in his mush--but the outlook is bleak.

[palerider]

Palladini, I looked at your video, but it doesn't show what we are asking for. Could you just say what you see on the bottom right of the machine:

Airsense 10

None of them just say 'Airsense 10'. they ALL have the model name printed on them under that, *ALL* four different models.