Got an ASV machine to play with. What settings should I use?
Re: Got an ASV machine to play with. What settings should I use?
So here is a question...
When I stop my ASV machine I noticed that unlike my AS10 where the drying fan runs for 20 minutes smoothly that the ASV machine seems to pulsate as it dries.
Could there be something amiss with the unit I have? It runs quietly, the unit runs smoothly and never pulsates when in use just pulsates when drying.
Anyone have similar behaviours?
Thanks
When I stop my ASV machine I noticed that unlike my AS10 where the drying fan runs for 20 minutes smoothly that the ASV machine seems to pulsate as it dries.
Could there be something amiss with the unit I have? It runs quietly, the unit runs smoothly and never pulsates when in use just pulsates when drying.
Anyone have similar behaviours?
Thanks
Re: Got an ASV machine to play with. What settings should I use?
My sleep Doctor had me checked for the left ventricular ejection fraction <45% I was up around 60%. If you have a heart problem you should have this checked. Here is what there talking about. In particular, if you have a patient with symptomatic, chronic heart failure (NYHA 2-4) and with a reduced left ventricular ejection fraction (LVEF ≤ 45%), using ASV to treat their moderate to severe central sleep apnea syndrome may be harmful.
_________________
| Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
| Mask: Evora Full Face Mask - Fitpack |
| Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1 |
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV
Re: Got an ASV machine to play with. What settings should I use?
You shouldn't even notice that it's running unless you put the hose right up to your ear.CPAPSteve wrote: ↑Tue Jan 28, 2020 1:52 pmSo here is a question...
When I stop my ASV machine I noticed that unlike my AS10 where the drying fan runs for 20 minutes smoothly that the ASV machine seems to pulsate as it dries.
Could there be something amiss with the unit I have? It runs quietly, the unit runs smoothly and never pulsates when in use just pulsates when drying.
Anyone have similar behaviours?
Thanks
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Got an ASV machine to play with. What settings should I use?
That's actually in debate, the study that indicated that was fatally flawed.squid13 wrote: ↑Tue Jan 28, 2020 4:04 pmMy sleep Doctor had me checked for the left ventricular ejection fraction <45% I was up around 60%. If you have a heart problem you should have this checked. Here is what there talking about. In particular, if you have a patient with symptomatic, chronic heart failure (NYHA 2-4) and with a reduced left ventricular ejection fraction (LVEF ≤ 45%), using ASV to treat their moderate to severe central sleep apnea syndrome may be harmful.
https://journal.chestnet.org/article/S0 ... 5/fulltext
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6277244/
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Got an ASV machine to play with. What settings should I use?
I guess my Doctor was playing it on the safe side cause I'm sure she read all that, better safe than sorry.
_________________
| Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
| Mask: Evora Full Face Mask - Fitpack |
| Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1 |
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV
Re: Got an ASV machine to play with. What settings should I use?
I don’t hear it at all but when I do put the hose up to my ears I can clearly hear the airflow pulsing (consistently) whereas my AS10 doesn’t do that at all. The machine otherwise, seems to work perfectly. Should I be concerned?palerider wrote: ↑Tue Jan 28, 2020 4:55 pmYou shouldn't even notice that it's running unless you put the hose right up to your ear.CPAPSteve wrote: ↑Tue Jan 28, 2020 1:52 pmSo here is a question...
When I stop my ASV machine I noticed that unlike my AS10 where the drying fan runs for 20 minutes smoothly that the ASV machine seems to pulsate as it dries.
Could there be something amiss with the unit I have? It runs quietly, the unit runs smoothly and never pulsates when in use just pulsates when drying.
Anyone have similar behaviours?
Thanks
Re: Got an ASV machine to play with. What settings should I use?
I wouldn't be concerned about the slight pulsing.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Got an ASV machine to play with. What settings should I use?
Yep the ASVs pulse as you describe
_________________
| Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
| Additional Comments: Resmed Aircurve 10 ASVAUTO Min Epap 10.4, Max Epap 11.6, PS 1.6-12.0 |
Re: Got an ASV machine to play with. What settings should I use?
Just so I am clear:
When running it is smooth and when it’s in the drying mode it consistently will pulse the air until the machine shuts off after 20 minutes?
Interesting... I wonder why it does that and not just run a steady flow like other resmed machines would.
When running it is smooth and when it’s in the drying mode it consistently will pulse the air until the machine shuts off after 20 minutes?
Interesting... I wonder why it does that and not just run a steady flow like other resmed machines would.
Re: Got an ASV machine to play with. What settings should I use?
The pulsing is mostly undetectable but sometimes it pulses a little harder in cool down.
I assumed it was testing system pressure to determine if someone was attached to the mask, so as to restart treatment.
I thought the machines were always pulsing subtly to collect data for the machine algorithms but you know what people say about assumptions.
I assumed it was testing system pressure to determine if someone was attached to the mask, so as to restart treatment.
I thought the machines were always pulsing subtly to collect data for the machine algorithms but you know what people say about assumptions.
_________________
| Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
| Additional Comments: Resmed Aircurve 10 ASVAUTO Min Epap 10.4, Max Epap 11.6, PS 1.6-12.0 |
Re: Got an ASV machine to play with. What settings should I use?
What would be a fair price for a barely used Aircurve 10 ASV?

