I've been battling with the sensation of not being able to sufficiently fill my lungs and my pulmonologist is thinking it is a combination of asthma/allergies and a neurologic difficulty regulating my breathing (I do also have benign MS). I know the cpap can't tell if you're awake or asleep, and I know that breathing patterns while awake are more erratic, but can information from the machine be useful in any way for the time you are awake?
The other night I had insomnia (unusual for me) and I kept the machine on for a couple of hours while I tried to sleep. For those 2 hours I had an AHI of 20.6 with 10 clear airway events (centrals according to DreamMapper) and 24 OAs. I'm just wondering if this information can be useful in any way as my doctor tries to work out the best course of treatment. (My pulmonologist is not my sleep doc, I have a separate sleep specialist.)
I appreciate any thoughts you may have about this.
Data while awake
Data while awake
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: DreamWear Nasal CPAP Mask with Headgear |
| Additional Comments: PR S1 60 Series Auto CPAP, using SleepyHead software |
Re: Data while awake
The way your body works while awake and asleep are completely different. The data recovered wouldn't be worth much, as apples and oranges are different. Jim
Use data to optimize your xPAP treatment!
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
Re: Data while awake
Thanks Jim. I knew the first part of what you said but didn't know if the data could be useful at all in this situation. I appreciate your response.Goofproof wrote:The way your body works while awake and asleep are completely different. The data recovered wouldn't be worth much, as apples and oranges are different. Jim
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: DreamWear Nasal CPAP Mask with Headgear |
| Additional Comments: PR S1 60 Series Auto CPAP, using SleepyHead software |
Re: Data while awake
CAs are common when you have the machine running and you are awake. It means that you stopped breathing for over 10 seconds, but there was no obstruction. You consciously stopped breathing.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
| Additional Comments: Back up is a new AS10. |
Re: Data while awake
I wish it was conscious! I'm having trouble consciously controlling my breathing all day!LSAT wrote:You consciously stopped breathing.
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: DreamWear Nasal CPAP Mask with Headgear |
| Additional Comments: PR S1 60 Series Auto CPAP, using SleepyHead software |
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: Data while awake
This is a very common issue. Especially for new users.
If you're going to lay there with the machine running, you need to consciously breathe to keep it from recording "events".
I've often found that when I DO that, I end up falling back to sleep.......sometimes fairly easily.
Den
.
If you're going to lay there with the machine running, you need to consciously breathe to keep it from recording "events".
I've often found that when I DO that, I end up falling back to sleep.......sometimes fairly easily.
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: Data while awake
Thanks Den. Fortunately that's not an issue for me as a rule with the machine, I just need to work on consciously breathing while awake!Wulfman... wrote:This is a very common issue. Especially for new users.
If you're going to lay there with the machine running, you need to consciously breathe to keep it from recording "events".
I've often found that when I DO that, I end up falling back to sleep.......sometimes fairly easily.
Den
.
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: DreamWear Nasal CPAP Mask with Headgear |
| Additional Comments: PR S1 60 Series Auto CPAP, using SleepyHead software |


