Newest ASV?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
M'ohms
Posts: 516
Joined: Fri Aug 09, 2013 2:44 pm
Location: Georgetown, Indiana

Newest ASV?

Post by M'ohms » Fri May 23, 2014 3:02 pm

I'm finally going to get my PRS1AutoSV Advanced (after a 6-week wait) and I want to find out what the latest version is. I'm getting the machine from a vendor that I have never used before, and I want to verify the machine before I take it home.

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: Supplemental oxygen at 2.5 lpm
AutoSV 960 with heated hose. Settings: EPAP Min-12, EPAP Max-17, PS Min-5.5, PS Max-13, Max Pressure-25, Rate-Auto, Rise Time 1. Use Sleepyhead and Encore Pro.
Top
User avatar
STL Mark
Posts: 950
Joined: Thu May 06, 2010 1:37 pm
Location: St. Louis, MO - USA

Re: Newest ASV?

Post by STL Mark » Fri May 23, 2014 5:19 pm

Make sure it has a 2014 date code on the bottom and that it is a 960 and not a 950 model.

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Machine: S9 VPAP Adapt (eASV) 36037

Mode: ASVAuto, Min EPAP: 4, Max EPAP: 15, Min PS: 3, Max PS: 15, Ramp: Off - Original Titration: 18
Top
User avatar
Sir NoddinOff
Posts: 4189
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: Newest ASV?

Post by Sir NoddinOff » Fri May 23, 2014 5:26 pm

M'ohms wrote:I'm finally going to get my PRS1AutoSV Advanced (after a 6-week wait) and I want to find out what the latest version is. I'm getting the machine from a vendor that I have never used before, and I want to verify the machine before I take it home.
My PR 960 autoSV was manufactured 3 months ago, according to the date on the bottom of the unit. I got it with zero run/blower hours direct from PR. My firmware revision is 2.00, which I'm pretty sure is the latest rev. (Note: It's a little confusing but the PR auto 560's, a different beast, are up to v.2.5xx, not to be confused with ASV series machines) You can note the latest firmware revision when you plug in the machine and the initial power-up screen appears, also the blower hours are displayed right after that. For the latest firmware revisions contact Ian the CEO of Accurate Biomed, member name at CPAPtalk 'accurate' .

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Top
User avatar
M'ohms
Posts: 516
Joined: Fri Aug 09, 2013 2:44 pm
Location: Georgetown, Indiana

Re: Newest ASV?

Post by M'ohms » Fri May 23, 2014 5:44 pm

Thank you! You both gave me the exact info that I need when I go to the DME!

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: Supplemental oxygen at 2.5 lpm
AutoSV 960 with heated hose. Settings: EPAP Min-12, EPAP Max-17, PS Min-5.5, PS Max-13, Max Pressure-25, Rate-Auto, Rise Time 1. Use Sleepyhead and Encore Pro.
Top


Return to “CPAP and Sleep Apnea Message Board”