6 masks down, still haven't found anything that works.

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Uncle_Bob
Posts: 2777
Joined: Tue Feb 24, 2009 12:10 pm
Location: Arizona

Re: 6 masks down, still haven't found anything that works.

Post by Uncle_Bob » Thu Mar 27, 2014 12:39 pm

digitalepiphany wrote:I've tried both hybrids (for a few weeks each), and those are no-gos.
digitalepiphany wrote: I have used the Innomed Hybrid. It has a chin support. I got a great seal with its mouth cushion, and my mouth stayed closed. No pissing in the wind here. A chin support, or that one at the very least, prevented my jaw from dropping and maintained a great seal.

User avatar
digitalepiphany
Posts: 255
Joined: Thu Sep 05, 2013 12:31 am
Location: Dallas, TX

Re: 6 masks down, still haven't found anything that works.

Post by digitalepiphany » Thu Mar 27, 2014 1:19 pm

Why confused face?

_________________
Mask: Amara Full Face CPAP Mask with Gel & Silicone Cushions
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: It's a VPAP ST. IPAP:16 EPAP: 12

User avatar
jencat824
Posts: 1442
Joined: Sun Oct 14, 2012 5:06 pm
Location: Jeffersonville, Indiana

Re: 6 masks down, still haven't found anything that works.

Post by jencat824 » Thu Mar 27, 2014 3:08 pm

digitalepiphany wrote: One of the reasons I asked about FFMs with chin support is because it's hard for me to find them on my own. As an example, I went to cpap.com to look for some. On the left-hand side is a box that allows you to sort masks by specific options. "Chin support" is not one of them. I went through a few pages, looking at the masks one-by-one, until I got fed up with that method. I figured it'd be far easier to just ask here. Only 4 have been mentioned so far (other than the Hans Rudolph I mentioned). I even just went back and re-read all the posts. So, here are the 4 mentioned thus far:
  1. Respironics FullLife - I was told this has chin support. Looking at pictures on cpap.com, I see no chin support. Is that an extra piece that can be added/removed?
  2. F&P FlexiFit HC432 - This one appears to seal below the chin, as opposed to having an actual chin support. I'm not pointing that out to say that it won't work, just that it's not a true chin support. I'm afraid I'd have to over-tighten it to keep it sealed. Still on my list though.
  3. F&P Forma - Same thing as the FlexFit. In fact, it looks almost exactly the same, with just slight differences. Is the FlexFit just an updated Forma?
  4. Hans Rudolph 7600 V2 - This is the only one mentioned so far that has an actual chin support. As far as I can remember, only one person has mentioned using it.
Are there any other FFMs with chin support that I can add to the list?
There is a chin strap on the Respironics Full Life mask. My hubby finds it helpful. To clarify, I quote from the CPAP.com page:

Chin Support Band. The band ensures a secure fit and provides added stability without a forehead support arm

This mask does not have forehead support, so they added the Chin Support Band. I don't think its only purpose is as chin support, but it does not say 'not used as a chin strap' so I really cannot say it is or is not a true chin support. In my hubby's case, the support from that chin support band DOES make a difference FOR HIM.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Pressure Auto 12-20cm CPAP compliant since 2000
Other masks I've tried: *=liked, #= no way
Piliaro, SleepWeaver Elan*, Swift FX w&w/o Bella Loops#, OpitLife#,Simplicity*, Mirage Vista*, Go Life for Her#, IQ (original hg only)*, Quattro FX (barely)###, Wisp*, Nuance#, Swift LT for her**

User avatar
robysue
Posts: 7520
Joined: Sat Sep 18, 2010 2:30 pm
Location: Buffalo, NY
Contact:

Re: 6 masks down, still haven't found anything that works.

Post by robysue » Thu Mar 27, 2014 3:37 pm

digitalepiphany wrote:Why confused face?
Because Uncle_Bob can't make heads nor tails out of two directly contradictory things you've said in previous posts:
digitalepiphany wrote:I've tried both hybrids (for a few weeks each), and those are no-gos.
digitalepiphany wrote: I have used the Innomed Hybrid. It has a chin support. I got a great seal with its mouth cushion, and my mouth stayed closed. No pissing in the wind here. A chin support, or that one at the very least, prevented my jaw from dropping and maintained a great seal.
And quite frankly, I'm confused too:
If the Innomed Hybrid has the chin support you want and need and you get a "great seal" with it and your mouth stays closed when you use it, then why is it a "no-go"????

_________________
Machine: DreamStation BiPAP® Auto Machine
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: PR System DreamStation and Humidifier. Max IPAP = 9, Min EPAP=4, Rise time setting = 3, minPS = 3, maxPS=5

User avatar
digitalepiphany
Posts: 255
Joined: Thu Sep 05, 2013 12:31 am
Location: Dallas, TX

Re: 6 masks down, still haven't found anything that works.

Post by digitalepiphany » Fri Mar 28, 2014 12:50 am

If you'd actually read my posts, you'd know that the problems I had with the Innomed Hybrid were with the pillows, not the mouth cushion. I said it very specifically. I also said that the pillows on the Resmed Liberty were great, but the mouth cushion wouldn't seal properly. I also said that if I could somehow combine the two, then I'd have the perfect mask.

There's no contradictory information coming from me, whatsoever. The only thing that's happening is that other people aren't paying attention. Now, if we had all stayed on topic like I wanted, none of this would be happening. Also, the not paying attention part doesn't even bother me. What does bother me is when people accuse me of being contradictory, lying, etc. when the problem is that they haven't been paying attention. Don't pay attention. I don't really care one way or the other. I do care, however, if you try piping in after not having paid attention. I definitely am being a complete dick here, and I feel justified doing so. Please don't accuse me of anything without making damn sure you've actually read what I've written.

So, I'll say it again. The Innomed Hybrid sealed great on the mouth cushion. The pillows did not. That is why it was a no-go.

_________________
Mask: Amara Full Face CPAP Mask with Gel & Silicone Cushions
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: It's a VPAP ST. IPAP:16 EPAP: 12

User avatar
digitalepiphany
Posts: 255
Joined: Thu Sep 05, 2013 12:31 am
Location: Dallas, TX

Re: 6 masks down, still haven't found anything that works.

Post by digitalepiphany » Fri Mar 28, 2014 12:55 am

jencat824 wrote:
digitalepiphany wrote: One of the reasons I asked about FFMs with chin support is because it's hard for me to find them on my own. As an example, I went to cpap.com to look for some. On the left-hand side is a box that allows you to sort masks by specific options. "Chin support" is not one of them. I went through a few pages, looking at the masks one-by-one, until I got fed up with that method. I figured it'd be far easier to just ask here. Only 4 have been mentioned so far (other than the Hans Rudolph I mentioned). I even just went back and re-read all the posts. So, here are the 4 mentioned thus far:
  1. Respironics FullLife - I was told this has chin support. Looking at pictures on cpap.com, I see no chin support. Is that an extra piece that can be added/removed?
  2. F&P FlexiFit HC432 - This one appears to seal below the chin, as opposed to having an actual chin support. I'm not pointing that out to say that it won't work, just that it's not a true chin support. I'm afraid I'd have to over-tighten it to keep it sealed. Still on my list though.
  3. F&P Forma - Same thing as the FlexFit. In fact, it looks almost exactly the same, with just slight differences. Is the FlexFit just an updated Forma?
  4. Hans Rudolph 7600 V2 - This is the only one mentioned so far that has an actual chin support. As far as I can remember, only one person has mentioned using it.
Are there any other FFMs with chin support that I can add to the list?
There is a chin strap on the Respironics Full Life mask. My hubby finds it helpful. To clarify, I quote from the CPAP.com page:

Chin Support Band. The band ensures a secure fit and provides added stability without a forehead support arm

This mask does not have forehead support, so they added the Chin Support Band. I don't think its only purpose is as chin support, but it does not say 'not used as a chin strap' so I really cannot say it is or is not a true chin support. In my hubby's case, the support from that chin support band DOES make a difference FOR HIM.
Thanks for the info. I'll look into a bit more. I've only looked at the pics so far.

_________________
Mask: Amara Full Face CPAP Mask with Gel & Silicone Cushions
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: It's a VPAP ST. IPAP:16 EPAP: 12