PR Wisp nasal mask
Re: PR Wisp nasal mask
Just got off the phone with my contact where I got my CPAP from. There going to order the Wisp kit as I'll be eligible for a new mask the middle of next month. Can't wait. According to my contact the fabric frame has been improved dramatically.
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
Re: PR Wisp nasal mask
I tried out the silicone at the DME, but the mask they gave me is the fabric one. It seems to be easier on the face than the silicone but not quite as stable. The fabric frame is reversible and has a very slippery side and the opposite side which has more grip. Maybe I have it too tight but I don't like the pressure it puts on my upper gums.
_________________
| Mask: Pilairo Q Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: PR Wisp nasal mask
I am really thinking about this mask but I am hesitant because I have kind of a bony face. I could never get the regular nasal masks to seal at the corner by the eye. How is the Wisp at following curves on the face and sealing?
PR System One 60 Series Auto CPAP with Heated Tube Humidifier, Airfit P10 mask
- sleeplessinaz
- Posts: 1067
- Joined: Mon Oct 29, 2007 10:49 am
- Location: Mesa, Arizona
Re: PR Wisp nasal mask
I have the Wisp. The headgear is massive. It is very adjustable though. Come with three sizes of the nasal cushion. I like it except for the giant headgear.
Start Date 08/30/07
APAP setting is 6 to 12
HH 2.5
Side Sleeper
HypoThyroidism & Diabetes
New Airsense autoset 12/08/14
APAP setting is 6 to 12
HH 2.5
Side Sleeper
HypoThyroidism & Diabetes
New Airsense autoset 12/08/14
Re: PR Wisp nasal mask
Got the Wisp yesterday and tried it out last night. The mask covers the nose and my claustrophobia kicks in big time. Went back to my Swift FX after 45 minutes. Not sure how to get used to it.
I agree it sleeplessinaz about the headgear
I agree it sleeplessinaz about the headgear
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
Re: PR Wisp nasal mask
I have to respectfully disagree about the headgear - to me it's one of the best things about the mask. (Of course I don't have long hair to contend with.)
I am on my third Wisp in a row (as they eventually wear out), and have really liked the design. To me the headgear is a very important part of the engineering that keeps this thing in place. One of the things I grew to hate about the Swift FX is that the dang flimsy strap over my head kept slipping forward towards my forehead, causing the cushions to fall out of my nostrils during the night. I had a similar problem afterward eventually with the Aloha - I loved the articulating angle of the nasal pillows but the inadequately designed straps still allowed the nasal cushions to slip out of my nostrils during the night.
IMHO, the Wisp stays in place most of the time because of two factors: 1) The fact that the headgear makes use of the back of my head as a sort of fulcrum instead of the top of my head; and 2) The way the double-walled triangular cushion uses the air pressure coming into the mask to create a comfortable form-fitting seal on the face surrounding my nose.
The one tip I recently stumbled upon to further improve the seal staying in place all night was this one - When the cushion would start to leak slightly at the base of the triangle, I used to tighten down the bottoms straps in order to tip the bottom of the triangle closer to my face, but then I would sometimes wake up with marks. I knew I had to keep the bottom of the triangular nosepiece tipped closer to my face than the top, but tightening it up was not the answer to comfort. Finally, I concluded that maybe I was pulling the back of the headgear down too close towards the back of my neck, so I experimented with pushing the large piece of the back of the headgear back up a little from my neck, and voila! that sufficiently adjusted the angle of the nosepiece so that the base tipped down in front a tiny bit more just the below my nose. Now that's what I generally adjust - sliding that back piece slightly up a little, instead of tightening the front straps.
Best wishes, Nate
I am on my third Wisp in a row (as they eventually wear out), and have really liked the design. To me the headgear is a very important part of the engineering that keeps this thing in place. One of the things I grew to hate about the Swift FX is that the dang flimsy strap over my head kept slipping forward towards my forehead, causing the cushions to fall out of my nostrils during the night. I had a similar problem afterward eventually with the Aloha - I loved the articulating angle of the nasal pillows but the inadequately designed straps still allowed the nasal cushions to slip out of my nostrils during the night.
IMHO, the Wisp stays in place most of the time because of two factors: 1) The fact that the headgear makes use of the back of my head as a sort of fulcrum instead of the top of my head; and 2) The way the double-walled triangular cushion uses the air pressure coming into the mask to create a comfortable form-fitting seal on the face surrounding my nose.
The one tip I recently stumbled upon to further improve the seal staying in place all night was this one - When the cushion would start to leak slightly at the base of the triangle, I used to tighten down the bottoms straps in order to tip the bottom of the triangle closer to my face, but then I would sometimes wake up with marks. I knew I had to keep the bottom of the triangular nosepiece tipped closer to my face than the top, but tightening it up was not the answer to comfort. Finally, I concluded that maybe I was pulling the back of the headgear down too close towards the back of my neck, so I experimented with pushing the large piece of the back of the headgear back up a little from my neck, and voila! that sufficiently adjusted the angle of the nosepiece so that the base tipped down in front a tiny bit more just the below my nose. Now that's what I generally adjust - sliding that back piece slightly up a little, instead of tightening the front straps.
Best wishes, Nate
_________________
| Mask: DreamWear Nasal CPAP Mask with Headgear |
| Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead |
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
Re: PR Wisp nasal mask
For those of you using the Wisp, what is your 95% pressure?
I have been using the SleepWeaver Elan, but with my ASV machine my pressure has been climing and I now see 16 to 18 CM.
This is starting to cause leaks and I am looking for an alternative. The wisp is near the top of my list right now.
I have been using the SleepWeaver Elan, but with my ASV machine my pressure has been climing and I now see 16 to 18 CM.
This is starting to cause leaks and I am looking for an alternative. The wisp is near the top of my list right now.
_________________
| Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
| Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
- cpapernewbie
- Posts: 685
- Joined: Fri Oct 13, 2006 5:53 pm
Re: PR Wisp nasal mask
Your mask will not affect the 95% pressure, unless there are big leaks (???)
In my case - changing from Swift to Wisp, my 95% pressure is still 10
In my case - changing from Swift to Wisp, my 95% pressure is still 10
_________________
| Machine: DreamStation Auto CPAP Machine |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: DreamStation Heated Humidifier |
| Additional Comments: CPAP history: dumb tank, auto, PR M, PR System 1, PR BIPAP, PR System 1 model 60, Resmed S9, Resmed S10, Dreamstation |
Resmed airsense 10
Re: PR Wisp nasal mask
When using my old S9 Autoset my pressure never went above 10. Now with my ASV machine my pressure is much higher 16 to 18 some days. The higher pressure causes the leaks in my Sleepweaver Elan cloth mask. My concern is can the wisp stay leak free at the higher pressure that I am now using?
_________________
| Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
| Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
Re: PR Wisp nasal mask
The hair issue doesn't bother me as I shave the head, and the seal is great. If I have to, I will shave my mustache if necessary. When I can feel my pulse in my face area, I know I've tighten the straps to much. It's just the claustrophobic feeling having something over my nose. Additionally, the air I'm breathing feels warmer than when I use the Swift FX. I don't a humidifier at this time. There has not been any nose hurting from the nasal pillows or congestion, I need to figure out how to get used to it.
apw, aka Pat
apw, aka Pat
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
Last edited by apw5746 on Sun Mar 30, 2014 3:00 pm, edited 2 times in total.
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
-
graydragon2
- Posts: 1
- Joined: Sun Mar 30, 2014 11:56 am
Re: PR Wisp nasal mask
I love the feel and look of the wisp but I could never get used to it. I felt like I was really struggling and really having to work to breath in and out with it. My pressures are 7-10. If I pressed the ramp feature I felt like I was getting no air at all. If anyone has any suggestions I may try it again.
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: Nuance & Nuance Pro Nasal Pillow CPAP Mask with Gel Nasal Pillows |
| Additional Comments: SleepyHead |
Re: PR Wisp nasal mask
I sat most of the afternoon watching NCAA men and women's basketball with Wisp on. Seemed to do okay. Getting ready to hit the sack for the night, and give it the old college try. Will talk about my experience tomorrow.apw5746 wrote: I need to figure out how to get used to it.
apw, aka Pat
Pat
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
- flyingwithoutwings
- Posts: 248
- Joined: Sat Oct 26, 2013 7:19 am
- Location: Central Florida
Re: PR Wisp nasal mask
I too am a Wisp fan. The first time I tried it I couldn't breath and after 5 miserable days I gave up and went back to the Swift FX. Then a few weeks later I decided to give the Wisp another try and the rest is history. I have the cloth frame and have no leak problems. I also like the Swift FX but my AHI is lower with the Wisp.
_________________
| Machine: PR System One REMStar 60 Series Auto CPAP Machine |
| Mask: Eson™ Nasal CPAP Mask with Headgear |
Last edited by flyingwithoutwings on Mon Mar 31, 2014 10:43 am, edited 1 time in total.
We cannot direct the wind, but we can adjust the sails!
Re: PR Wisp nasal mask
Wore it last night without a hitch. I take Mirapex, and Neurontin for restless leg syndrome. If I take a couple extra of the Neurontin, which I did, it also makes me pretty tired after about 45 minutes; so I did. Read several chapters in my book, and sure enough I got very mellow and sleepy. Slept like a baby, except when my bladder woke me up. No fuss/muss with the hair since I'm bald, and didn't notice the warm air (exhaled breath). The headgear isn't as comfortable as my FX, but I don't have the leaks. It's a tradeoff I can live with. Or in this case, sleep with. It left no marks either. Will stop taking the extra Neurontin when I get totally used to the mask. The frame is cloth also.apw5746 wrote:I sat most of the afternoon watching NCAA men and women's basketball with Wisp on. Seemed to do okay. Getting ready to hit the sack for the night, and give it the old college try. Will talk about my experience tomorrow.apw5746 wrote: I need to figure out how to get used to it.
apw, aka Pat
Pat
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
Re: PR Wisp nasal mask
Second night was great! It's a keeper for sure.
_________________
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!






