problem with respironics 760p

Thanks in advance for any help you can provide.
About a week ago my machine fell from about 2 feet high onto carpeting. My machine is in bipap mode. A few days later the problem started.
For the past 3 nights I went from almost no VS to over 550. Also almost all my events were CA and almost no OA.
This has totally reversed no CA and almost all OA. The EPAP setting 4.5 generally went up to about 6 max now it goes to 11.5 and stays there
and IPAP setting 14 went up from about 9.4 max to 14 in a very short time and stays there. my ps is set to 2.5-8.0. could the humidifier which
i reconnected and started using at auto level 2 be causing this. If needed does anyone know of a repair facility? Thanks again

Look up "acbio(dot)com" on the Internet and do a search for "Accurate" on this forum.......they're a member.
They do factory authorized service work on Philips/Respironics equipment.


Den

.

If you go to page 2, there's a thread that someone posted titled "Accurate BioMed Services -Kudos".


Den

.

thanks Wulfman

Your humidifier shouldn't have anything to do with what you are seeing but you might check all the seals and gaskets to make sure something didn't come loose with the fall or reconnection which might cause the large number of snores like in vibrations that the machine thinks are snores.

thanks will check