Question for bald guys.....
Question for bald guys.....
Morning guys
My son will be getting his gear on Tuesday and I have a question for you..... Do the straps leave marks on your unprotected dome or do you use a buff/papcap as a liner? He is bald...(sorry son, both sides of the family ) and since I have lots of hair, I had to ask the question as I have no clue on this one. Any other suggestions you might make would be greatly appreciated.
Thanks in advance.....
Nan
My son will be getting his gear on Tuesday and I have a question for you..... Do the straps leave marks on your unprotected dome or do you use a buff/papcap as a liner? He is bald...(sorry son, both sides of the family ) and since I have lots of hair, I had to ask the question as I have no clue on this one. Any other suggestions you might make would be greatly appreciated.
Thanks in advance.....
Nan
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Started cpap in 2010.. still at it with great results.
- Sheriff Buford
- Posts: 4110
- Joined: Mon Aug 09, 2010 8:01 am
- Location: Kingwood, Texas
Re: Question for bald guys.....
Nan: I have some balding areas and I have not seen any imprints or red marks because of the straps...
Sheriff
Sheriff
_________________
Machine: AirSense 11 Autoset |
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Question for bald guys.....
More face to kiss, sheriff; your lucky wife!
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Question for bald guys.....
I am quite baldish on top and keep my hair rather short, what's left, I have not noticed any discoloration or visible marks, and no one has mentioned marks on top of the old chrome dome. In the morning I can feel where the straps have put pressure on the tissue but it "fluffs" up in a couple of hours. I do not want a Trump comb over at all.
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: ResScan 3.11; The pink air is the same as the gray air. |
ResMed S9 Auto set/Heated humidifier/AirFit N30i
diagnosed and began CPAP treatment 2003.
diagnosed and began CPAP treatment 2003.
Re: Question for bald guys.....
I'm like msla bald on top and keep my hair very short on the sides and have no marks in the morning.
_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1 |
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV
Re: Question for bald guys.....
I have not noticed any marks on my head in the morning, but I have the advantage of only having to look at the front and sides, so I figure that what is behind me is not important.
Seriously, I am using a nasal mask that does not require very much pressure from the straps to keep it in place. In fact, my RT told me that tightening the straps too much will cause leaks ( and I found out that she is right). The light pressure required by this mask doesn't leave a noticeable mark that lasts more than a few minutes.
Seriously, I am using a nasal mask that does not require very much pressure from the straps to keep it in place. In fact, my RT told me that tightening the straps too much will cause leaks ( and I found out that she is right). The light pressure required by this mask doesn't leave a noticeable mark that lasts more than a few minutes.
JZAP
SW Ohio
SW Ohio
Re: Question for bald guys.....
Should any strap marks materialize I bet that Karen at PadaCheek probably has some sort of strap cover that would work on the offending strap.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Question for bald guys.....
nanwilson,
As you can see from my profile pic, I'm bald and keep my hair short on the sides. I use a FFM, but have not strap marks. The only mark I have encountered in my first week of xPAP therapy has been across the bridge of my nose. I hope this helps!
As you can see from my profile pic, I'm bald and keep my hair short on the sides. I use a FFM, but have not strap marks. The only mark I have encountered in my first week of xPAP therapy has been across the bridge of my nose. I hope this helps!
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Non-heated hose // Software: SleepyHead |
Began BiPAP therapy: 10/03/12
Quit: Approx. June, 2013 - for 18 months
Regrouped: Approx. May, 2015
Quit: Approx. June, 2013 - for 18 months
Regrouped: Approx. May, 2015
Re: Question for bald guys.....
Thanks all
We shall see what happens tomorrow when he gets his gear and tries it out. Should he need it, I'm pretty sure he has a motorcycle dew rag, barring that I can make strap covers for him.
Cheers
Nan
We shall see what happens tomorrow when he gets his gear and tries it out. Should he need it, I'm pretty sure he has a motorcycle dew rag, barring that I can make strap covers for him.
Cheers
Nan
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Started cpap in 2010.. still at it with great results.
Re: Question for bald guys.....
I briefly -period of time- a couple months back had shaved my head. Other than the straps slipping a little and having to re-adjust things, I don't recall any bad marks on my actual head. Now with my face with the SleepWeaver Elan OR chinstrap(s)... That's a whole different story/thread.
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Additional Comments: SleepyHead & Encore Basic Software & a Zeo |


