Sorry if this has already been mentioned, but in addition to the fact that all you can see on your screen are averages, the machine won't fully update until noon (in the time zone it's set for, which--to make it even more confusing--may or may not be the time zone you're in!). The machine waits to see if you're going to do anymore sleeping before updating the data.So I check my information on my cpap machine: AHI - 7 day average is 1.9 - up from 1.7 from yesterday. The 30 day average is 2.3 - it didn't change. I understand it's an average - but . . .is this right?
Am I nuts? Please help me to understand ...
Re: Am I nuts? Please help me to understand ...
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm
- physicsbob
- Posts: 177
- Joined: Sun Jan 10, 2010 10:40 pm
- Location: Michigan
Re: Am I nuts? Please help me to understand ...
Yes my Opus 360 whistles too, sometimes if I exhale just right I can play a tune with it. Every once awhile I soak the elbow in soapy water and use a safety pin to makes sure all the holes are clean. Then I hook it to the short hose and plug the end of the elbow with my finger and the other end up against a running faucet forcing water out the holes. It is messy, water spraying every where. but it makes sure they are clean.