There a a few of us who are concerned by the leakage rates that this unit is reporting. We are getting leakage rates of about 60 lpm, and even with everything blocked off (inlet to the humidier taped over for example), the rate only goes down to around 30.
Two of use at at 10 cm pressure, and should be only having about 30 leakage when the mask is in place.
It would be helpful to us if other people could report the leakage that shows on their LCD display (it can be configured to show this - see the manual).
TIA.
F/p 244 SleepStyle - What are your leakage rates?
1 post
• Page 1 of 1
F/p 244 SleepStyle - What are your leakage rates?
_________________
| Mask: FlexiFit HC407 Nasal CPAP Mask with Headgear |
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
-- Speep study---
AHI = 56.4, RDI = 56.4
breakdown: 5.9 apnea, 0.2 central, 50.6 hyponpea, avg duration 20 sec.
AHI back=77.7, side=0.8 prone = 58.2
O2 desat min 83%, 40.3 min or desat < less then 91%
AHI = 56.4, RDI = 56.4
breakdown: 5.9 apnea, 0.2 central, 50.6 hyponpea, avg duration 20 sec.
AHI back=77.7, side=0.8 prone = 58.2
O2 desat min 83%, 40.3 min or desat < less then 91%
1 post
• Page 1 of 1