Inverter Power for AutoSet II w/ H4i

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
RedBackFur
Posts: 75
Joined: Wed Sep 23, 2009 6:16 pm
Location: San Francisco Bay Area

Re: Inverter Power for AutoSet II w/ H4i

Post by RedBackFur » Sat Dec 12, 2009 5:46 pm

terrydk wrote:Speaking of blips in power...what happens to the AutoSet II when it gets a short interruption of power? When the power comes back on does it restart where it left off or does it have to be manually turned back on and restarted? During storms our rural power grid can be interrupted several times in a night.
@Terrydk,
I have my Autoset to set to Auto on/off. So when I put the mask on, just a puff fires it up, and when I take the mask off, it shuts off in about 3 seconds. So if it were to lose power, you would very likely wake up (I sure did during both power failures, PreUPS), and you will immediately pull your mask off, unless you are happy to breathe out your mouth.

When the power goes back on, just put your mask back on and breathe away. If you noticed, there is no power switch on the S8.

_________________
Mask
Additional Comments: Trying out an F&P Pilario®. Hose Lifter, ResMed Tubing Wrap.