Need Sunrise 8001 setup manual

I just picked up a Sunrise LT 8001 but need to know how to set the pressure, what data if any is available
from the data port ect. I also have the model 8054 a auto cpap with the software could I use that software
to get data from the 8001 ?

Hi Woody.

See if these instructions for the 9000 will work.

Den



Devilbiss 9000 series machines

1. Turn on the machine
2. Turn off the machine
3. Right after that, hold the down arrow down as well as the ramp button... while holding those 2 buttons down hit the power button and it takes you to the setup mode...
4. Scroll over using the Select button until you get to ipap and epap settings and use the up and down arrows to change the levels. When done turn off the machine.



This is a quote from the Provider manual for the 9055 Series DeVilbiss RPM Bilevel machine:

To unlock the prescription settings, make sure the blower is OFF (OFF should be shown on the display.) While pressing the DELAY and DOWN buttons, press the ON/OFF button to start the blower. The prescription settings are now unlocked and can be changed using the UP and DOWN buttons on the keypad. Press the SELECT button to advance to the next setting. The first value displayed on the LCD will be the mode.