Changing pressure

I know this has been asked before, How would I change the pressure on my machine?
Thanks.

I know if you do a search, wulfman has posted the instructions many times. I'm not savvy enough to copy them here for you. Good luck.

Oooooooh.......about like this.

Den



Menu for M Series Pro

1. Hold down the <- -> buttons while plugging in the power on the back, wait for 2 beeps, release buttons.
2. Press the + key. <- -> buttons move to next field, -/+ keys decrement/increment
3. Check the following field(s):

-Therapy Mode = CPAP

-CPAP Pressure = NN (4 - 20 cm.)

-C-Flex Setting = (options are off, 1, 2 or 3)

-Ramp Time = (options are 05 to 45 min)

-Ramp Start Pressure = cm (Min. 4cm)

-Mask Alert Feature = On (On/Off)

-Auto Off Feature = Off (On/off)

-Show AHI/Leak Feature = On (On/Off)

Press On/Off button to exit.





==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.