Have you ever seen a leak line like this?

OutaSync · Post by **OutaSync** » Sun Nov 02, 2008 11:48 am

Notice the horizontal line running above the regular line between hours 3 and 4.

This was last night on my M Series APAP. Weird, huh?

Bev

Wulfman · Post by **Wulfman** » Sun Nov 02, 2008 11:52 am

Hmmmmm.......weird and interesting.

That's a new one to me.

Den

jules · Post by **jules** » Sun Nov 02, 2008 11:53 am

daylight savings time change get to the machine?

DreamStalker · Post by **DreamStalker** » Sun Nov 02, 2008 11:54 am

That just don't look right unless you were using two masks during that half hour.

Snoredog · Post by **Snoredog** » Sun Nov 02, 2008 11:57 am

I would say that is an artifact of not reading the memory correctly, could be from an unformatted SmartCard. I would erase the card and run Setup on it using Encore software.

I also suspect the "lost days" some people report on the M series is due to bad memory management by the Remstars.

Most of your leak looks better than that report.

echo · Post by **echo** » Sun Nov 02, 2008 12:34 pm

Your story is getting more and more interesting, Bev.

-SWS · Post by **-SWS** » Sun Nov 02, 2008 12:52 pm

There's a theory that even leaks can have Dopplegangers.

I think the lower leak may have just met its Doppleganger.

silver123 · Post by **silver123** » Sun Nov 02, 2008 3:06 pm

Mine did something similiar and i'm pretty sure that it's like an a double tracking due to the time change....wierd, eh?

silver

Kiralynx · Post by **Kiralynx** » Sun Nov 02, 2008 8:39 pm

Snoredog wrote:could be from an unformatted SmartCard. I would erase the card and run Setup on it using Encore software.

OT for this thread, sorta, but how does one format a SmartCard? How does one run Setup on it using WHICH Encore software?

Snoredog · Post by **Snoredog** » Sun Nov 02, 2008 8:55 pm

Kiralynx wrote:
Snoredog wrote:could be from an unformatted SmartCard. I would erase the card and run Setup on it using Encore software.
OT for this thread, sorta, but how does one format a SmartCard? How does one run Setup on it using WHICH Encore software?

On EncorePro that she has, it is in a couple of places, under Utilities (drop down menu within on the left side) or you can have it do it automatically after it downloads your data by checking the box in System Setup from the menu bar top right.

Kiralynx · Post by **Kiralynx** » Sun Nov 02, 2008 9:11 pm

Snoredog wrote:On EncorePro that she has, it is in a couple of places, under Utilities (drop down menu within on the left side) or you can have it do it automatically after it downloads your data by checking the box in System Setup from the menu bar top right.

IOW, if you don't have Encore Pro, you're outta luck? What happens if you simply put a new Smart Card in a machine, w/o "formatting" (which reminds me of the Ancient Days of Yore and formatting 5.25" SSSD floppies by the barrel....).

GumbyCT · Post by **GumbyCT** » Sun Nov 02, 2008 9:33 pm

Not sure if EV has anything to format or erase the card.

I think the machine just beeps if the card is NOT formatted. It will work w/o the card.

There is a utility at
http://www.mycpap.org/downloads/CardUti ... taller.zip
That will help if you need to format.

Good Luck,
GumbyCT

Have you ever seen a leak line like this?

Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?

Re: Have you ever seen a leak line like this?