I use Black & Decker Electromate 400

milkman · Post by **milkman** » Sat Sep 22, 2007 3:09 pm

I have a 19.5 AH battery pack and it runs my M-series Auto set at 8-15, running at 8-12, average pressure of 10.5, 90% pressure of 11. It will run for 18 hours before shutting off. I put the pack together with werker batteries (one 12 AH and one 7.5 AH wired together) from batteries plus. This is running at about 6000 ft. elevation.

billbolton · Post by **billbolton** » Sat Sep 22, 2007 3:29 pm

milkman wrote:I have a 19.5 AH battery pack and it runs my M-series Auto set at 8-15, running at 8-12, average pressure of 10.5, 90% pressure of 11. It will run for 18 hours before shutting off. I put the pack together with werker batteries (one 12 AH and one 7.5 AH wired together) from batteries plus. This is running at about 6000 ft. elevation.

Thanks milkman, that is useful actual usage point data for future reference.

Cheers,

Bill

Guest · Post by **Guest** » Sat Sep 22, 2007 5:05 pm

Thanks data helps always

bearcatx16 · Post by **bearcatx16** » Mon Sep 24, 2007 3:37 pm

Thanks to all for your replys to my inquiry.

I that I will try the 400 w/the inverter from cpapman. If need be I can always find a generator to recharge the 400.

Best regards,

Fred

tdehnke · Post by **tdehnke** » Sat Sep 29, 2007 5:19 pm

Do you have to use the DC-12 with the S8 Elite, or can you just go 12V into it from 12V power system?

Thanks

Machine	Mask

Additional Comments: Airmini, Medistrom Pilot 24, CMS 60C Pulse Oximeter, ResScan 6

I use Black & Decker Electromate 400

S8 12V Adapter