How long does this take?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
jqp
Posts: 151
Joined: Wed Aug 08, 2007 8:52 am
Location: Peachtree City, GA

Post by jqp » Tue Aug 14, 2007 1:56 pm

As the CPAP turns... so are the days of our lives.

I have an actual appointment in the morning at the local Apria office.

I'm supposed to pick up a Remstar Plus with C-flex with heated humidifer and be fitted for the mask.

They actually had me down for a Fisher and Paykel unit, but I like the way the Remstar units look... they don't look like they belong in an old folks home.

With Aetne, I rent for 8 0r 9 months and then it converts to a purchase. Apria says I can get a PRO unit if the doc modifies the Rx for it.

Hopefully this will work out.

JQP


User avatar
amandalee
Posts: 225
Joined: Thu Jul 05, 2007 1:54 pm
Location: Salt Lake City, UT

Post by amandalee » Tue Aug 14, 2007 2:34 pm

I'm not sure if the Plus has data capability.
What you want is the PRO. I had an M Series PRO with C-Flex and it has full data capability.

I think the Plus might only have compliance data.
Good luck!


_________________
Mask
Perplexity is the beginning of knowledge.
-Kahlil Gibran

User avatar
jqp
Posts: 151
Joined: Wed Aug 08, 2007 8:52 am
Location: Peachtree City, GA

Post by jqp » Tue Aug 14, 2007 2:37 pm

My doc is going to call me at home tonight to go over the results of the study. I'll see if he'll fax in a new Rx with the "Pro" specified so I can get that.

User avatar
amandalee
Posts: 225
Joined: Thu Jul 05, 2007 1:54 pm
Location: Salt Lake City, UT

Post by amandalee » Tue Aug 14, 2007 2:43 pm

Good idea.
If you haven't already, you might want to do a search on CPAP.com to compare the machines, just to make sure.
If you click on the little picture at the bottom of my post, it will take you to the M Series Pro machine that I have.
Then you could just search for the Plus to make sure I'm not leading you astray.


_________________
Mask
Perplexity is the beginning of knowledge.
-Kahlil Gibran

User avatar
jqp
Posts: 151
Joined: Wed Aug 08, 2007 8:52 am
Location: Peachtree City, GA

Post by jqp » Wed Aug 15, 2007 9:40 am

Well, I now have a CPAP machine and a mask.

They gave me a bottom of the line Remstar M series with heated humidifier.

I asked about the pro model qith C-flex. They said they didn't have that in stock but would order it for me and swap out my machine with a modified Rx from the doctor.

I'll give this a couple nights and then talk to the doc. My pressure is 13cm, which seems kind of high. Thank goodness for the ramp-up feature.


User avatar
amandalee
Posts: 225
Joined: Thu Jul 05, 2007 1:54 pm
Location: Salt Lake City, UT

Post by amandalee » Thu Aug 16, 2007 3:14 pm

Yes, the ramping feature is very helpful.
I'm also supposed to be at a pressure of 13, and I agree that it seems really high. After 3 nights of using straight CPAP at 13, my lungs, airway, throat and nose were raw and in constant pain.
I complained to my doctor about it and he wrote me a new prescription for an AutoPAP machine. After about 3 days of using it, it looks like my average pressure is actually about 9.
If you have any problems at all tolerating the pressure, be sure to let your doctor know about it. Since you are going to be getting a different machine anyway, you could try for an Auto if it might be better.
But then again, you might be just fine. The M-Series Pro with C-Flex is a good machine if you only need straight CPAP and not Auto.

Good luck! I hope everything works out well for you!


_________________
Mask
Perplexity is the beginning of knowledge.
-Kahlil Gibran

User avatar
jqp
Posts: 151
Joined: Wed Aug 08, 2007 8:52 am
Location: Peachtree City, GA

Post by jqp » Thu Aug 16, 2007 3:50 pm

Thanks. I did notice that although I felt like I would float away at 13 when I first put the mask on, after an hour or two it was barely noticable.