Resmed Sullivan VPAP II clinician menu? HELP

soulfixinman · Post by **soulfixinman** » Thu May 17, 2007 12:54 pm

I have a ResMed Sullivan VPAP® II that I need to be able to change the settings on with help from this forum.

Does anyone have the sequence to get into the clinician menu for this machine?

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): resmed

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): resmed

Snoredog · Post by **Snoredog** » Thu May 17, 2007 1:02 pm

have no idea man.

Sullivan is the even older square model. Got to be some key-stroke combination, possibly combined with power on. Don't know if that one has a "20" button or not, but if it does you might try holding down the Start button and the 20 button at the same time.

add'l info:

takes a manometer to set the pressure:

Setting the Treatment Pressure

1. Press the STOP button and turn the flow generator off.

2. Connect the mask system to the air tubing.

3. Hold down the START and “20” buttons while you turn on the main power switch at the rear of the flow generator. Hold the buttons down until the START and “20” buttons illuminate.

4. Block the opening of the mask with the palm of your hand. (Do not block the mask exhalation vent.)

5. Read the pressure on the manometer. Use the “5” button to decrease pressure and the “10” button to increase pressure.

6. Press the Stop button to revert to normal operating mode.

_

soulfixinman · Post by **soulfixinman** » Thu May 17, 2007 4:04 pm

thanks I will try that

dsm · Post by **dsm** » Thu May 17, 2007 4:28 pm

Hi,

Am assuming you have the square box shaped Sullivan II.

Does it have a set of buttons like this ...
http://www.internetage.com/cpapinfo/res ... esmed2.jpg

If yes then look at the last post in this thread ...

viewtopic.php?t=19683&highlight=il1

DSM

dsm · Post by **dsm** » Thu May 17, 2007 4:45 pm

PS

Pls do post back what works - D

soulfixinman · Post by **soulfixinman** » Thu May 17, 2007 7:12 pm

here is what mine looks like, it has a display

left to right it has five buttons

pressure on/off----ramp5---ramp10----ramp20-----display light/alarm on off

On the display you can see a lock symbol

dsm · Post by **dsm** » Thu May 17, 2007 9:16 pm

As a hit and miss suggestion.

Try powereing off & holding the start & ramp5 button down then turn power on.

Keep holding the start & ramp5 buttons down for 3+ secs.

See if that gets you into clinical mode

D (good luck)

soulfixinman · Post by **soulfixinman** » Fri May 18, 2007 8:04 am

I was persistant and figured it out, thanks to all for the info.

this is for a Resmed Vpap II

Power off the unit
Push and hold both buttons on the right and continue to hold as you power on the unit.

release buttons when you see clinical mode

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): resmed, Power

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): resmed, Power

dsm · Post by **dsm** » Sat May 19, 2007 12:02 am

Great work - I will note that proceedure & file it

Thanks

DSM