Need Help with Mask Condensation (no hose rainout)

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
WearyOne
Posts: 1796
Joined: Sat Mar 03, 2007 3:30 pm
Location: USA

Need Help with Mask Condensation (no hose rainout)

Post by WearyOne » Mon Jul 20, 2026 9:01 pm

.
Hi all, I have been on CPAP therapy since 2007. Last year, I started getting water droplets in my mask along with dampness where I have to wipe the mask out a few times a night. The heated hose is always completely dry. When it started, I had not changed anything...masks, room temp, CPAP settings, nothing. So it baffles me what started it. I am still having the problem every single night. I have tried changing heated hose temp and humidity settings to no avail. I recently changed to the AirFit F40 and I have the same problem with this one. If I drop down the humidity too much, I get a horrible dry mouth. Room temp is normally around 69-70. Any help would be greatly appreciated.

_________________
Machine: DreamStation 2 Auto CPAP Advanced with Humidifier
Mask: AirFit™ F40 System - L/STD
Additional Comments: Oscar Software | APAP: 11-13 | 2nd Mask: Simplus Medium

User avatar
Nocibur
Posts: 483
Joined: Sat Jan 25, 2025 6:08 am

Re: Need Help with Mask Condensation (no hose rainout)

Post by Nocibur » Tue Jul 21, 2026 3:33 am

WearyOne wrote:
Mon Jul 20, 2026 9:01 pm
... I have been on CPAP therapy since 2007.
Yikes! I've been 9 characters since then!

I had a similar problem with the water dispenser in my side-by-side refrigerator-- everything froze because one micro-atmosphere invaded the other.

Anyway, take the cushion
mask.jpg
mask.jpg (167.8 KiB) Viewed 60 times


and cover it with thick flannel, tiny-bubble bubblewrap or anything that will provide insulation. Cut out holes and slots for hose and attachment protrusions. Use double-sided tape or some adhesive to hold in place if necessary.

'Member the old hose-cozies? Same idea.

User avatar
WearyOne
Posts: 1796
Joined: Sat Mar 03, 2007 3:30 pm
Location: USA

Re: Need Help with Mask Condensation (no hose rainout)

Post by WearyOne » Tue Jul 21, 2026 10:00 am

Nocibur wrote:
Tue Jul 21, 2026 3:33 am
WearyOne wrote:
Mon Jul 20, 2026 9:01 pm
... I have been on CPAP therapy since 2007.
Yikes! I've been 9 characters since then!

I had a similar problem with the water dispenser in my side-by-side refrigerator-- everything froze because one micro-atmosphere invaded the other.

Anyway, take the cushion

mask.jpg

and cover it with thick flannel, tiny-bubble bubblewrap or anything that will provide insulation. Cut out holes and slots for hose and attachment protrusions. Use double-sided tape or some adhesive to hold in place if necessary.

'Member the old hose-cozies? Same idea.

I was trying to think of a way to cover it, but didn't want to use glue...have no idea why I didn't think of double-sided tape! Bubblewrap sounds interesting, but wonder if it would start popping during the night since I sleep on my side...haha! I will be trying your suggesting tonight...THANK YOU!

Yep, I remember the old hose cozies. I also remember ordering my first heated hose from a company not in the US where I am because no one here sold them yet.

_________________
Machine: DreamStation 2 Auto CPAP Advanced with Humidifier
Mask: AirFit™ F40 System - L/STD
Additional Comments: Oscar Software | APAP: 11-13 | 2nd Mask: Simplus Medium