My first night and I have a problem – Can any one please help
My first night and I have a problem – Can any one please help
Hi every one , just been diagnosed as having sleep apnea . The doctor recommended that I use a CPAP machine ( Resmed 10 + Resmed F20 mask ) So last night was my first night using the Resmed machine but I had a problem.
When I first put the mask on and switched the Resmed machine on , every thing seemed to be working well . The mask felt comfortable and there were no mask leaks . But about ½ an hour later I started to notice that there was an instant rush of increased air pressure into the mask which started making the mask to instantly leak air . I then re tightened the mask , but that made no difference. The increased air pressure now coming into the mask was just to much that I had to take off the mask and switch the machine off.
I have attached my Oscar results for that first night and I am hoping that some one here can help me with this problem.
Thank you.
When I first put the mask on and switched the Resmed machine on , every thing seemed to be working well . The mask felt comfortable and there were no mask leaks . But about ½ an hour later I started to notice that there was an instant rush of increased air pressure into the mask which started making the mask to instantly leak air . I then re tightened the mask , but that made no difference. The increased air pressure now coming into the mask was just to much that I had to take off the mask and switch the machine off.
I have attached my Oscar results for that first night and I am hoping that some one here can help me with this problem.
Thank you.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
- Attachments
-
- Robert Whiteside1.jpg (460.07 KiB) Viewed 2889 times
Re: My first night and I have a problem – Can any one please help
hi zapper! i'm zonker!Zapper wrote: ↑Wed May 31, 2023 6:43 pm
When I first put the mask on and switched the Resmed machine on , every thing seemed to be working well . The mask felt comfortable and there were no mask leaks . But about ½ an hour later I started to notice that there was an instant rush of increased air pressure into the mask which started making the mask to instantly leak air . I then re tightened the mask , but that made no difference. The increased air pressure now coming into the mask was just to much that I had to take off the mask and switch the machine off.



you might try looking to you tube for some mask fitting videos. make sure you put the name of your mask in the search terms. if there is more than one video, look at them all for any tips.
one i can give you right up front is to make sure you are applying your mask while laying down.
and just btw? other than that mask fit, you seem to be doing well.
good luck!
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: My first night and I have a problem – Can any one please help
Hi and a big thank youzonker wrote: ↑Wed May 31, 2023 7:00 pmhi zapper! i'm zonker!Zapper wrote: ↑Wed May 31, 2023 6:43 pm
When I first put the mask on and switched the Resmed machine on , every thing seemed to be working well . The mask felt comfortable and there were no mask leaks . But about ½ an hour later I started to notice that there was an instant rush of increased air pressure into the mask which started making the mask to instantly leak air . I then re tightened the mask , but that made no difference. The increased air pressure now coming into the mask was just to much that I had to take off the mask and switch the machine off.
![]()
![]()
![]()
you might try looking to you tube for some mask fitting videos. make sure you put the name of your mask in the search terms. if there is more than one video, look at them all for any tips.
one i can give you right up front is to make sure you are applying your mask while laying down.
and just btw? other than that mask fit, you seem to be doing well.
good luck!
Do you think that the increase in mask air pressure after about ½ an hour was due to the mask its self not being fitted correctly . If so I’m wondering why if the problem is due to a mask leak , it only started after ½ an hour and not straight away after first putting the mask on.
Zapper .
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Re: My first night and I have a problem – Can any one please help
It is counter-intuitive, but modern masks often leak when something is too tight more than too loose. I know that I, for one, wore my masks way too tight for weeks before I figured out to leave just a little slack so that the pressure could gently inflate the mask against my skin.
Few of us get it just right the first night or two. The main thing at first is to keep at it and not to give up as you find what works for you. I mean, people like Zonker and me eventually figured it out enough to get benefit from PAP, and so will you.
As for the half-hour thing, it may be that there is a ramp setting keeping pressure artificially low at the start of the night. That helps many people starting out get used to wearing the mask so that pressure won't increase until they are asleep.
Just remember that when starting PAP therapy, your brain will tell you the pressure is a lot, even though it is actually not much pressure, really. Your brain knows it is different from the usual, so it exaggerates the feeling. Eventually, if you keep on with it, the pressure will feel like nothing at all because your brain will be used to it and will welcome it as the life-improving miracle that it is.
Welcome. You WILL get there. And everyone in this forum will be of whatever help we can be. If not, Zonker will gladly refund you whatever it cost you to join cpaptalk.com.
-jeff
Few of us get it just right the first night or two. The main thing at first is to keep at it and not to give up as you find what works for you. I mean, people like Zonker and me eventually figured it out enough to get benefit from PAP, and so will you.
As for the half-hour thing, it may be that there is a ramp setting keeping pressure artificially low at the start of the night. That helps many people starting out get used to wearing the mask so that pressure won't increase until they are asleep.
Just remember that when starting PAP therapy, your brain will tell you the pressure is a lot, even though it is actually not much pressure, really. Your brain knows it is different from the usual, so it exaggerates the feeling. Eventually, if you keep on with it, the pressure will feel like nothing at all because your brain will be used to it and will welcome it as the life-improving miracle that it is.
Welcome. You WILL get there. And everyone in this forum will be of whatever help we can be. If not, Zonker will gladly refund you whatever it cost you to join cpaptalk.com.

-jeff
Re: My first night and I have a problem – Can any one please help
Thanks for the sound advice and encouragement , its good to know that help is on hand from all you guys at CT . By the way if your ever come to Thailand there’s an Ice Cold beer waiting for youlazarus wrote: ↑Wed May 31, 2023 7:17 pmIt is counter-intuitive, but modern masks often leak when something is too tight more than too loose. I know that I, for one, wore my masks too tight for weeks before I figured out to leave just a little slack so that the pressure could gently inflate the mask against my skin.
Few of us get it just right the first night or two. The main thing at first is to keep at it and not to give up as you find what works for you. I mean, people like Zonker and me eventually figured it out enough to get benefit from PAP, and so will you.
As for the half-hour thing, it may be that there is a ramp setting keeping pressure artificially low at the start of the night. That helps many people starting out get used to wearing the mask so that pressure won't increase until they are asleep.
Just remember that when starting PAP therapy, your brain will tell you the pressure is a lot, even though it is actually not much pressure, really. Your brain knows it is different from the usual, so it exaggerates the feeling. Eventually, if you keep on with it, the pressure will feel like nothing at all because your brain will be used to it and will welcome it as the life-improving miracle that it is.
Welcome. You WILL get there. And everyone in this forum will be of whatever help we can be. If not, Zonker will gladly refund you whatever it cost you to join cpaptalk.com.
-jeff

Zapper
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Re: My first night and I have a problem – Can any one please help
Per the above report the ramp is set to OFF.
Something changed though to cause such a rather abrupt increase in pressure. My first thought was either sleeping position like was on one's side and rolled over onto one's back or maybe one of those chin tuck situations.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: My first night and I have a problem – Can any one please help
Thanks, @Pugsy. Didn't see that.
Thailand is definitely on my bucket list. My friends who have gone rave about it.
Re: My first night and I have a problem – Can any one please help
Pugsy wrote: ↑Wed May 31, 2023 7:36 pmPer the above report the ramp is set to OFF.
Something changed though to cause such a rather abrupt increase in pressure. My first thought was either sleeping position like was on one's side and rolled over onto one's back or maybe one of those chin tuck situations.
I was wondering about why such an abrupt change in pressure after ½ an hour , as for my sleeping position . I first slept on my side but as soon as the increase in mask pressure , apart from re tightening the mask , I then changed sleeping position to attempt to sleep on my back , which had no effect as the increase in mask pressure continued . Is it possible that the increase in mask pressure could be some how related to a Resmed machine setting by any chance.
Zapper
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Re: My first night and I have a problem – Can any one please help
no beer for lazurus. he just gets petulant and wants to borrow money off of ya.
stick with me, kid, i'll put you right.

i THINK that pressure increase was due to the high mask leak. but i could be wrong.
lazurus will let us know.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: My first night and I have a problem – Can any one please help
Not that I can see on the above report.
Auto ramp will do it but you have ramp OFF. Have you messed with that setting at all....at any time????
A dramatic increase in flow limitations or snores will do it but again I don't see it in the above report.
Did you ever really go to sleep during that short period of time last night?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: My first night and I have a problem – Can any one please help
Yeah, the 'something' was some change in breathing, then an OA, which caused the pressure to jump up. Now, what that caused that breathing disturbance, no clue to that.Pugsy wrote: ↑Wed May 31, 2023 7:36 pmPer the above report the ramp is set to OFF.
Something changed though to cause such a rather abrupt increase in pressure. My first thought was either sleeping position like was on one's side and rolled over onto one's back or maybe one of those chin tuck situations.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: My first night and I have a problem – Can any one please help
oh, jeez. i didn't even notice how short the session was.
never mind.
never mind.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: My first night and I have a problem – Can any one please help
Leaks don't cause increased pressure...they just don't.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: My first night and I have a problem – Can any one please help
I’m sure if you step foot in LOS ( Land of Smiles ) it will change your life and you will want to return again one day .

Zapper
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Re: My first night and I have a problem – Can any one please help
noted.
and now that you've pointed it out, seems i've read that here before.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg