ResMed S9 Stopped working
ResMed S9 Stopped working
I have A ResMed S9 that i got in 2013 and it quit working tonight. I put it on tonight and didn't notice if it was working right then as I just rolled over and tried to sleep. i tossed and turned for a couple of hours and finally looked at it and the power button was blinking green and the humidifier was blinking blue at the same time and the screen is blank/off. I checked the plug at the machine, the power block and the outlet and all are firmly connected. I tried it without the humidifier connected, it was the same. i tried with the SD card seated and ejected. same thing. i noticed that the light on the power brick was blinking at the same rate as the lights on the machine and when i unplugged the cord from the machine the power brick light comes on steady and bright. plug it back in and it flashes with the machine. every once in awhile it would look like the screen and everything would start to work for a second or two, the screen would show the ResMed logo an start to load and the button light would be solid but it would stop quickly and blink again.
is my machine dead or is there a fix out there for it? anyone seen this before?
is my machine dead or is there a fix out there for it? anyone seen this before?
- ChicagoGranny
- Posts: 15134
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: ResMed S9 Stopped working
It's in its eighth year. Shouldn't you consider replacing it?
- Dog Slobber
- Posts: 4191
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: ResMed S9 Stopped working
I don't know CjD1973 (the OP) or anything about them, but why let that stop me from answering on their behalf.ChicagoGranny wrote: ↑Thu Feb 11, 2021 7:47 amIt's in its eighth year. Shouldn't you consider replacing it?
Yes, they should consider replacing their machine.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
- ChicagoGranny
- Posts: 15134
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: ResMed S9 Stopped working
I suspected something like this but was too shy to mention it.
Re: ResMed S9 Stopped working
YOU?!?!?ChicagoGranny wrote: ↑Thu Feb 11, 2021 6:35 pmI suspected something like this but was too shy to mention it.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: ResMed S9 Stopped working
Try plugging it into another outlet, then try a different electrical circuit.
ResMed S9 range 9.8-17, RespCare Hybrid FFM
Never, never, never, never say never.
Never, never, never, never say never.
Re: ResMed S9 Stopped working
I have a S9 and love mine and dread the day it dies. The Airsense 10 is a pitiful replacement. Noisy and inadequate water supply. But the doc says CPAP machines last about 7 years. Yours is overdue and so is mine. They don't make them like the use to!
Re: ResMed S9 Stopped working
The water tank on the Air10 series holds *EXACTLY* the same amount of water as the water tank on the S9 series. (380ml)
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: ResMed S9 Stopped working
x
_________________
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: ResMed S9 VPAP Auto (I've had 4), I don't use the humidifier |
Last edited by elsueno on Sat Feb 20, 2021 1:20 am, edited 1 time in total.
Re: ResMed S9 Stopped working
Does the power supply blink while plugged into an outlet but not your machine? It would be nice if it was just the power supply.
_________________
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Machine is a ResMed Aircurve 10 ASV |
- cyberdreamer
- Posts: 129
- Joined: Mon Jun 24, 2019 10:57 am
- Location: Brazil
Re: ResMed S9 Stopped working
I'm surprised you think that way. I had a S9 loaner for a year before buying my Airsense 10 apap and they both work perfectly. The new Airsense 10 even has a new humidity level (8).
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
Machine: Airsense 10 Autoset (humidity 7, slimline hose) (5 years)
Mask: Resmed F30 (medium) (1 year)
Previous masks: Swift FX Nano (5 years); Dreamwear Nasal (few days); Swift FX pillow (few days)
Sleep study in 2016 with AHI 12 and some oxy desats
Mask: Resmed F30 (medium) (1 year)
Previous masks: Swift FX Nano (5 years); Dreamwear Nasal (few days); Swift FX pillow (few days)
Sleep study in 2016 with AHI 12 and some oxy desats
Re: ResMed S9 Stopped working
If you have access to a different power brick you could try it or maybe have someone test yours, otherwise I think I would get a different machine.CjD1973 wrote: ↑Thu Feb 11, 2021 3:15 amI have A ResMed S9 that i got in 2013 and it quit working tonight. I put it on tonight and didn't notice if it was working right then as I just rolled over and tried to sleep. i tossed and turned for a couple of hours and finally looked at it and the power button was blinking green and the humidifier was blinking blue at the same time and the screen is blank/off. I checked the plug at the machine, the power block and the outlet and all are firmly connected. I tried it without the humidifier connected, it was the same. i tried with the SD card seated and ejected. same thing. i noticed that the light on the power brick was blinking at the same rate as the lights on the machine and when i unplugged the cord from the machine the power brick light comes on steady and bright. plug it back in and it flashes with the machine. every once in awhile it would look like the screen and everything would start to work for a second or two, the screen would show the ResMed logo an start to load and the button light would be solid but it would stop quickly and blink again.
is my machine dead or is there a fix out there for it? anyone seen this before?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Amara View Full Face CPAP Mask with Headgear |
Additional Comments: Setting: PS 4.0 over 14.0-25.0; Humidifer 4 & Heated Hose |
Resmed AirCurve10 Vauto w/humidifier
Amara View mask
O2 - 2-4 lpm
Amara View mask
O2 - 2-4 lpm
- ChicagoGranny
- Posts: 15134
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: ResMed S9 Stopped working
When the S9 was canceled, I bought one to stretch out the years I could enjoy the machine. Then, I bought an AirSense 10. It works just as well. Maybe a little better.
Re: ResMed S9 Stopped working
LSAT is currently advertising an A10 for Her on this site.
You might take a look.
You might take a look.
_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
Re: ResMed S9 Stopped working
welp, SOMETHING must've happened as you haven't been in for a couple of nights.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg