CPAP machine fell off nightstand

CF said"Too many people assume that everybody else us "on the dole".
The truth is that the trough has gotten smaller and smaller,
so the only hogs really wallowing in it are the big ones. (Corporate)
The runts (really deserving/needy) don't have a chance

I usually agree with you but "the trough has gotten smaller" You can't be serious. Welfare was 100 billion in the 70s and is 1.2 trillion now. Hardly smaller and smaller. If it were not for people at the 1.2 trillion dollar trough that don't need to be there, but want to be there, there would be plenty for the truly deserving/needy,

D.H. wrote: ↑

Sun Jan 12, 2020 9:57 am

Rolling over in bed should not be considered "abuse."

Dropping the machine on the floor, no matter how it happens, is *NOT* a manufacturing defect, which is what the warranty covers.

Stop being stupid.
If only.. :sigh:

Was just the power supply. Back in business

Goofproof wrote: ↑

Sun Jan 12, 2020 10:57 am

D.H. wrote: ↑

Sun Jan 12, 2020 10:16 am

BTW, I had a similar problem. The connector on the AEIOmed Everest III CPAP sparked and melted. There was damage to the connector and to the socket in the battery pack. The socket on the machine presumably was still good, but I did not have a good cord to put there. Fortunately, this was machine #2, so I took machine #2 out of the closet and used it until #4 arrived.

It's a shame no CPAP on the market today has a fully integrated battery the way this one did.

Fine product, had to buy 4 over (Years?? a short time, either they were crap or you must be hard on equipment. Jim

Four machines since 1999. That's not excessive.

D.H. wrote: ↑

Sun Jan 12, 2020 10:16 am

BTW, I had a similar problem. The connector on the AEIOmed Everest III CPAP sparked and melted. There was damage to the connector and to the socket in the battery pack. The socket on the machine presumably was still good, but I did not have a good cord to put there. Fortunately, this was machine #2, so I took machine #2 out of the closet and used it until #4 arrived.

It's a shame no CPAP on the market today has a fully integrated battery the way this one did.

You are pasting about this machine, and alluding you have had 4 of them, which has nothing to do with the posters unit. Make up your mind. Jim

Goofproof wrote: ↑

Mon Jan 13, 2020 8:24 pm

D.H. wrote: ↑

Sun Jan 12, 2020 10:16 am

BTW, I had a similar problem. The connector on the AEIOmed Everest III CPAP sparked and melted. There was damage to the connector and to the socket in the battery pack. The socket on the machine presumably was still good, but I did not have a good cord to put there. Fortunately, this was machine #2, so I took machine #2 out of the closet and used it until #4 arrived.

It's a shame no CPAP on the market today has a fully integrated battery the way this one did.

You are pasting about this machine, and alluding you have had 4 of them, which has nothing to do with the posters unit. Make up your mind. Jim

I only have one CPAP of that brand. I had two F&P and a Respironics.

What's the suggestion for staying in a hotel?

Bubba1 wrote: ↑

Tue Mar 03, 2020 8:15 pm

What's the suggestion for staying in a hotel?

When staying in a hotel I put my machine in the nightstand drawer and leave the drawer open it can’t fall off then

When traveling, we place our machines on the night stands and use the Boss Hose to control the hoses. We have two of them, one for her hose and one for mine.

https://www.cpap.com/productpage/pursle ... ent-system

Dog Slobber wrote: ↑

Sat Jan 11, 2020 7:02 pm

I put little rubber stick on the bottom on my device, stopped it from sliding around.

Where did you buy those? I need something like that to keep my machine from sliding.

Jane_Air wrote: ↑

Sat Mar 07, 2020 4:08 pm

Dog Slobber wrote: ↑

Sat Jan 11, 2020 7:02 pm

I put little rubber stick on the bottom on my device, stopped it from sliding around.

Where did you buy those? I need something like that to keep my machine from sliding.

Walmart has them. I use a rubber mat under mine. Its designed to keep dog bowels from sliding around.

babydinosnoreless wrote: ↑

Sat Mar 07, 2020 4:51 pm

Jane_Air wrote: ↑

Sat Mar 07, 2020 4:08 pm

Dog Slobber wrote: ↑

Sat Jan 11, 2020 7:02 pm

I put little rubber stick on the bottom on my device, stopped it from sliding around.

Where did you buy those? I need something like that to keep my machine from sliding.

Walmart has them. I use a rubber mat under mine. Its designed to keep dog bowels from sliding around.

i think that's where dog slobber got the idea.

right under his dinner.

zonker wrote: ↑

Sat Mar 07, 2020 5:47 pm

babydinosnoreless wrote: ↑

Sat Mar 07, 2020 4:51 pm

Jane_Air wrote: ↑

Sat Mar 07, 2020 4:08 pm

Dog Slobber wrote: ↑

Sat Jan 11, 2020 7:02 pm

I put little rubber stick on the bottom on my device, stopped it from sliding around.

Where did you buy those? I need something like that to keep my machine from sliding.

Walmart has them. I use a rubber mat under mine. Its designed to keep dog bowels from sliding around.

i think that's where dog slobber got the idea.

right under his dinner.

LOL!

babydinosnoreless wrote: ↑

Sat Mar 07, 2020 4:51 pm

. . . rubber mat under mine. Its designed to keep dog bowels . . .

Dog bowels have no place under my cpap.