Hi,
I've been using a Respironics REMstar series CPAP machine for some years, set on pressure 7 and using a Quattro full face mask. Works OK I guess. Have kind of given up with monitoring data as tech has left the card reader behind, and given up using the humidifier which is fiddly and permanently gross inside. As I am traveling more to visit grown up kids I'm considering getting a Dreamstation Go Auto. This choice appeals for: 1) no external power brick, 2) ability to use slim but standard hose (15mm), 3) availability of APAP feature and modern interface to data would provide better assessment of how well therapy is working. Just wanted to run my thinking by the group and ask specifically--
1) Is there any reason not to also use the "Go" for all-the-time use at home?
2) Is 15mm slim tubing going to be satisfactory or turn out to be too noisy or anything?
Thanks for any advice!
-Steve
Dreamstation Go advice please
- ragtopcircus
- Posts: 220
- Joined: Mon Sep 09, 2019 11:55 am
Re: Dreamstation Go advice please
15mm is what Resmed ships with the Airsense 10 For Her. I think the ClimateLine hose is 15mm also. It’s also what ships with the regular Dreamstation. I’ve never used anything larger.
Btw, the Resmed slimline rubber hose coupler is slightly larger in OD than the Respironics version. If not using the humidifier and elbow, the Resmed Slimline won’t quite fit, so I’d stick with Respironics hoses.
The Go’s data and function is comparable to the regular Dreamstation. If you buy the optional humidifier, it is reasonable for home use. It is louder than the regular Dreamstation when inhaling though. It helps to point the inlet away from you or put the machine on the floor.
I certainly prefer Resmed’s EPR and auto algorithm to the Dreamstation versions, but that’s no more or less true for the Go.
Btw, the Resmed slimline rubber hose coupler is slightly larger in OD than the Respironics version. If not using the humidifier and elbow, the Resmed Slimline won’t quite fit, so I’d stick with Respironics hoses.
The Go’s data and function is comparable to the regular Dreamstation. If you buy the optional humidifier, it is reasonable for home use. It is louder than the regular Dreamstation when inhaling though. It helps to point the inlet away from you or put the machine on the floor.
I certainly prefer Resmed’s EPR and auto algorithm to the Dreamstation versions, but that’s no more or less true for the Go.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: BiPAP VAuto 10-25 PS 4.4, and wherever my tempestuous turbinates take me .... |
- ragtopcircus
- Posts: 220
- Joined: Mon Sep 09, 2019 11:55 am
Re: Dreamstation Go advice please
Respironics recommends mask setting X0 if using a non-Respironics mask. That’s just CYA BS. X1 is a more reasonable default setting. With that nonsense addressed, even the 12mm hose is quite usable. However, the pressure accuracy is better with 15mm.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: BiPAP VAuto 10-25 PS 4.4, and wherever my tempestuous turbinates take me .... |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Dreamstation Go advice please
" . . . It helps to point the inlet away from you . . . "
This is always the case, especially when somebody in the bed has gas.

This is always the case, especially when somebody in the bed has gas.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Dreamstation Go advice please
I've been using the go with optional humidifier for some months now. I read somewhere that the compressor in it is the same size as the full sized machine, hence the noise generated by the compressor itself is the same, but due to it being a smaller machine, more of that noise comes through. So like a previous poster pointed out, better point the intake away, or keep it on the floor. But having the same compressor as a full sized machine means it can be used as a daily machine.sfwood wrote: ↑Sun Oct 27, 2019 2:18 pmHi,
I've been using a Respironics REMstar series CPAP machine for some years, set on pressure 7 and using a Quattro full face mask. Works OK I guess. Have kind of given up with monitoring data as tech has left the card reader behind, and given up using the humidifier which is fiddly and permanently gross inside. As I am traveling more to visit grown up kids I'm considering getting a Dreamstation Go Auto. This choice appeals for: 1) no external power brick, 2) ability to use slim but standard hose (15mm), 3) availability of APAP feature and modern interface to data would provide better assessment of how well therapy is working. Just wanted to run my thinking by the group and ask specifically--
1) Is there any reason not to also use the "Go" for all-the-time use at home?
2) Is 15mm slim tubing going to be satisfactory or turn out to be too noisy or anything?
Thanks for any advice!
-Steve
Mine shipped with the 12mm hose, that worked fine when the settings are done correctly. But I ended up using a standard 22mm hose and kept the 12mm one for travelling. Didn't notice a difference in noise levels between the two.
_________________
Machine: DreamStation Go Auto CPAP Machine |
Mask: AirTouch™ F20 Full Face CPAP Mask with Headgear |
Humidifier: Philips Respironics DreamStation Go Heated Humidifier |
Additional Comments: Uses a Dreamwear hybrid full face mask for travel as it packs a lot flatter than the F20. But it's a little noisier. |
Derek