ResMed AirSense 10

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
aroberts76
Posts: 1
Joined: Tue Oct 01, 2019 9:03 pm

ResMed AirSense 10

Post by aroberts76 » Tue Oct 01, 2019 9:10 pm

I adjusted my minimum pressure to 4.0 a few weeks ago and that was too low and now I have put it back to 7.0. So my
Minimum is 7.0 and my maximum is 11.0 however, it still stays on 4.0. Picture is attached

Please help,
Amanda
Top
User avatar
jimbud
Posts: 1469
Joined: Sat Dec 01, 2018 8:19 pm

Re: ResMed AirSense 10

Post by jimbud » Tue Oct 01, 2019 9:26 pm

Which machine?
Did you set the new pressure. Usually push dial in to set.

Need fill out your equipment in your profile.
Machine
Mask
Ect.

Must have information to help.
JPB

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleep on a Buckwheat Hull Pillow.
Top
User avatar
LSAT
Posts: 13347
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: ResMed AirSense 10

Post by LSAT » Wed Oct 02, 2019 3:06 am

aroberts76 wrote: ↑
Tue Oct 01, 2019 9:10 pm
 I adjusted my minimum pressure to 4.0 a few weeks ago and that was too low and now I have put it back to 7.0. So my
Minimum is 7.0 and my maximum is 11.0 however, it still stays on 4.0. Picture is attached

Please help,
Amanda
You may be using the Ramp feature with the machine starting at 4 when turned on...Find Ramp in your settings and turn it off.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion)
Additional Comments: Back up is a new AS10.
Top


Return to “CPAP and Sleep Apnea Message Board”