DreamMachine

I have a Dream machine that I got in Nov 2018 and it was great until Feb 2019 and it started to mess up First it would not heat up under Adaptive mode so I had to use AUTO MODE then it started to burn up water like 6 hours I would get then 4,5 hours and this was set up on #2 humidity then the machine would heat up at all the company I got it from VERUS HEALTH CARE CPAP sent me a new 1 OKAY it was fine for about 35 days and it started doing the same thing SO I looked up every thing about these machines the height the low where they can be put its not next to a heater its 6" below my bed or 6" above my bed or even it did not stop there I am on # 5 they are sending me a new 1 on Friday I have new chin strap new masks new hoses OH the machine will not heat when I have the heated hose plugged in I AM LOST EVEN my Doctor does not know what is going on ANY BODY KNOW ANYTHING

One reply to your previous thread about the same problem which you never responded to.
viewtopic.php?f=1&t=175942&p=1307640#p1307640

You have had horrible luck with the Respironics DreamStation model line...most people won't be having the problems you are having and most people will have the chamber at least last the night even with maximum humidity being delivered.

You need to rule out leaks first...large leaks and/or higher air flow will cause more water to be used up faster.
You need to use available software to figure out if leaks are the culprit.
If they aren't the culprit...maybe it's time to get a ResMed machine.