AirFit F20 mask works except for the bridge of the nose
- raisedfist
- Posts: 1176
- Joined: Wed Jun 15, 2016 7:21 am
AirFit F20 mask works except for the bridge of the nose
This mask seals great except for the fact that the cushion causes pain on the bridge of the nose. Is this easily solved somehow? I like the mask otherwise as the new elbow diffuser is real quiet.
Philips Respironics Trilogy 100
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
Re: AirFit F20 mask works except for the bridge of the nose
I used to wear that mask and liked it. It was making the bridge of my nose sore, too. So sore that it rubbed it raw eventually. Had I taken the advice of the Sheriff and a few others early on and used a band aid or moleskin, I probably would never have had to switch masks. One of these days, I may visit using it again.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
- Okie bipap
- Posts: 3566
- Joined: Thu Oct 15, 2015 4:14 pm
- Location: Central Oklahoma
Re: AirFit F20 mask works except for the bridge of the nose
When I used the Symplus mask, I would place a piece of moleskin on my nose every night to prevent it from getting sore. You can find moleskin at Walmart or any drug store in the foot care section. If you decide to use it all the time, you can purchase rolls of it on Amazon at a very reasonable price. I learned about the moleskin from the RT I worked with when I first started treatment. She told mer husband used it on his nose every night to prevent sores.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: IPAP 20-25, ps 4, OSCAR software |
Growing old is mandatory, but growing up is optional.
- raisedfist
- Posts: 1176
- Joined: Wed Jun 15, 2016 7:21 am
Re: AirFit F20 mask works except for the bridge of the nose
Thanks I ordered a moleskin role where you can just custom cut pieces out and I should be able to try it out this weekend. Will be nice to use this quiet mask again without tearing my face apart.
Philips Respironics Trilogy 100
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
Re: AirFit F20 mask works except for the bridge of the nose
I see in your profile that you are showing the Simplus....I tried the F20 and went back to the Simplus. I found it to be more comfortableraisedfist wrote: ↑Tue Apr 23, 2019 7:18 amThis mask seals great except for the fact that the cushion causes pain on the bridge of the nose. Is this easily solved somehow? I like the mask otherwise as the new elbow diffuser is real quiet.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- raisedfist
- Posts: 1176
- Joined: Wed Jun 15, 2016 7:21 am
Re: AirFit F20 mask works except for the bridge of the nose
I like the simplus overall but for some reason it makes my respiratory rate shoot up to 30 - 50bpm for blocks of time, maybe because of excessive mouth breathing. Or maybe it's just a glitch with my ResMed machine, since my PR machine it doesn't do that.LSAT wrote: ↑Wed Apr 24, 2019 2:58 pmI see in your profile that you are showing the Simplus....I tried the F20 and went back to the Simplus. I found it to be more comfortableraisedfist wrote: ↑Tue Apr 23, 2019 7:18 amThis mask seals great except for the fact that the cushion causes pain on the bridge of the nose. Is this easily solved somehow? I like the mask otherwise as the new elbow diffuser is real quiet.
Philips Respironics Trilogy 100
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
Re: AirFit F20 mask works except for the bridge of the nose
I to like the Simplus but not only does the respiratory rate block at 50 but also the pressure will stay at maximum for the same time ouch!!!. I have to mouth breath as my nose is obstructed .
I have recently started to use a Resmed Quatro Air and I do not have the high resp. rate or pressure. Why should this mask be better?
Im interested that you found that this problem did not occur with the PR machine as I have been trying to get transferred onto a Dreamstation
I have recently started to use a Resmed Quatro Air and I do not have the high resp. rate or pressure. Why should this mask be better?
Im interested that you found that this problem did not occur with the PR machine as I have been trying to get transferred onto a Dreamstation
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Simplus Full Face CPAP Mask with Headgear |
- Sheriff Buford
- Posts: 4109
- Joined: Mon Aug 09, 2010 8:01 am
- Location: Kingwood, Texas
Re: AirFit F20 mask works except for the bridge of the nose
The adhesive on the moleskin is very strong. When I try removing it in the morning, it wants to remove the skin off my nose. I put a strip of cloth medical tape under the strip of moleskin (between the moleskin and my nose). This removes the ouch, after taking it off in the morning.
Sheriff
Sheriff
_________________
Machine: AirSense 11 Autoset |
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
- raisedfist
- Posts: 1176
- Joined: Wed Jun 15, 2016 7:21 am
Re: AirFit F20 mask works except for the bridge of the nose
I'm not sure what exactly is the issue. I get odd variation when it comes to respiratory rate, tidal volume and minute ventilation - same settings, but different full face masks. It may have to do with the jaw dropping while sleeping, causing one to excessively breath through the mouth. I don't really know. No real leak issues across the board.edam wrote: ↑Fri Apr 26, 2019 1:45 amI to like the Simplus but not only does the respiratory rate block at 50 but also the pressure will stay at maximum for the same time ouch!!!. I have to mouth breath as my nose is obstructed .
I have recently started to use a Resmed Quatro Air and I do not have the high resp. rate or pressure. Why should this mask be better?
Im interested that you found that this problem did not occur with the PR machine as I have been trying to get transferred onto a Dreamstation
The Simplus is probably the most comfortable FFM I have tried. I tried using the FF masks that cradle under the nose to not obstruct your vision or have a forehead peace, but they end up hurting the skin between my upper lip and nostrils.
Philips Respironics Trilogy 100
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12