How reliable are your machines?
How reliable are your machines?
For those of you who have used the machines for years: how reliable are these machines?
Re: How reliable are your machines?
Solid as a rock, but it's always good to have a backup machine just in case.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Simplus Full Face CPAP Mask with Headgear |
Additional Comments: Pressure is set to 10 cmH2O. |
-Paul.
Re: How reliable are your machines?
Machine malfunctions are rarely the cause of any trouble, especially if they're from the big two' (Resmed, Respironics) or handful of other popular machines used by most even internationally. Their function is pretty simple and even if something were to go wrong, replacement (if valid) is usually very fast from reputable dealers, but having back-up machines (either older ones, travel ones or secondaries of our everyday ones is recommended for when either ours are at the end of their lives, or forgotten in hotels (or anywhere else), or do have minor glitches for any reason. Fixing those is usually fast and inexpensive (especially through acbio.com if otherwise out of warranty).
Re: How reliable are your machines?
I've had four machines, and only one of them actual broke to the point of immediate unusability. That was an Everest-II machine from AEIO-Med. The cord on the power supply (the part that connects to the unit or battery pack) burned out and became unconnectable and also ruined the socket in the battery pack. That company went out of business in 2009, due to a fire in heir factory in China.
Fortunately, I had my old and trusty (and very large) F&P HC-233 as a backup, so I did not miss a night.
Fortunately, I had my old and trusty (and very large) F&P HC-233 as a backup, so I did not miss a night.
Last edited by D.H. on Sun Mar 24, 2019 7:26 pm, edited 1 time in total.
-
- Posts: 18
- Joined: Fri Mar 22, 2019 5:25 pm
Re: How reliable are your machines?
I have had a Resmed S9 for over 4 years, no notable issues, and I have traveled with it a fair amount.
Getting a new dedicated smaller travel CPAP and will also have this as my backup should my old S9 ever fail. I could get a new Resmed for no cost though insurance but see no need to do so since it works fine.
Getting a new dedicated smaller travel CPAP and will also have this as my backup should my old S9 ever fail. I could get a new Resmed for no cost though insurance but see no need to do so since it works fine.
-
- Posts: 616
- Joined: Tue Dec 15, 2015 7:30 am
Re: How reliable are your machines?
Hi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
_________________
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Re: How reliable are your machines?
I thought these machines had about a 5 year lifespan.rick blaine wrote: ↑Sun Mar 24, 2019 9:26 amHi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
- Dog Slobber
- Posts: 4166
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: How reliable are your machines?
No.biker wrote: ↑Sun Mar 24, 2019 9:30 amI thought these machines had about a 5 year lifespan.rick blaine wrote: ↑Sun Mar 24, 2019 9:26 amHi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
Typically the timeframe for insurance carrier to replace a machine is 5 years.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Re: How reliable are your machines?
Arizona Willie has an S9 with over 25,000 run hours...that's about 10 years.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: How reliable are your machines?
I wonder why Resmed is telling us it’s typically 5 years?Dog Slobber wrote: ↑Sun Mar 24, 2019 9:42 amNo.biker wrote: ↑Sun Mar 24, 2019 9:30 amI thought these machines had about a 5 year lifespan.rick blaine wrote: ↑Sun Mar 24, 2019 9:26 amHi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
Typically the timeframe for insurance carrier to replace a machine is 5 years.
https://www.resmed.com/us/en/consumer/p ... plies.html
My S9 has 21,000 hours so far.
- Dog Slobber
- Posts: 4166
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: How reliable are your machines?
Because ResMed makes money by selling machines.biker wrote: ↑Sun Mar 24, 2019 10:00 amI wonder why Resmed is telling us it’s typically 5 years?Dog Slobber wrote: ↑Sun Mar 24, 2019 9:42 amNo.biker wrote: ↑Sun Mar 24, 2019 9:30 amI thought these machines had about a 5 year lifespan.rick blaine wrote: ↑Sun Mar 24, 2019 9:26 amHi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
Typically the timeframe for insurance carrier to replace a machine is 5 years.
https://www.resmed.com/us/en/consumer/p ... plies.html
My S9 has 21,000 hours so far.
Most leased car are replaced at 3 years, I would not interpret that to mean the average life span of a car is 3 years.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Re: How reliable are your machines?
thank you for the education, rick. not being an engineer, this was new to me.rick blaine wrote: ↑Sun Mar 24, 2019 9:26 amHi tarpatel,
You may or may not be familiar with the term engineers use – 'mean-time-to-failure' – 'mean' meaning 'average', 'the statistical mean'.
AFAIK, the MTF for Philips Respironics machines is 10,000 hours. I don't have a hard number for ResMed machines, but I imagine their MTF is in the same ballpark.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
- remstarcpap
- Posts: 317
- Joined: Mon Feb 16, 2009 2:17 pm
Re: How reliable are your machines?
As a self-paid cpap user, it's pretty clear that most machines will basically last a very very long time, as I have several S9's close to 20,000 hours. The only "failures" I have had were a pin broke off on the power supply, so I needed a new one, and one Climateline hose failed to heat after perhaps a few years of use. I suspect that like my car, the desire to upgrade to something better will happen before my machines die.
Of course this only applies to machines from Resmed and Respironics, and probably not to tiny travel machines.
Of course this only applies to machines from Resmed and Respironics, and probably not to tiny travel machines.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Tape on mouth |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: How reliable are your machines?
Probably not so much THEIR travel machines, either.remstarcpap wrote: ↑Sun Mar 24, 2019 11:47 am. . . only applies to machines from Resmed and Respironics, and probably not to tiny travel machines.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: How reliable are your machines?
Being ridiculously wealthy, I prefer to replace my machines before they fail.
My PRS 960 ASV has less than 13,000 hours, I replaced it with an almost new Resmed AirCurve 10 ASV. I am keeping the old one as a backup, unless someone makes me a ridiculously generous offer.
I did sell my S9 Autoset after 3 years, when I moved on to ASV.
I also like newer tech.
For those who question my wealth I have some great bridges I will sell cheap.
My PRS 960 ASV has less than 13,000 hours, I replaced it with an almost new Resmed AirCurve 10 ASV. I am keeping the old one as a backup, unless someone makes me a ridiculously generous offer.
I did sell my S9 Autoset after 3 years, when I moved on to ASV.
I also like newer tech.
For those who question my wealth I have some great bridges I will sell cheap.
_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |