X-Large Halo style chinstrap up for grabs
-
- Posts: 121
- Joined: Wed Feb 17, 2016 10:58 am
- Location: Oklahoma
X-Large Halo style chinstrap up for grabs
I have an almost new Extra Large Halo-Style chinstrap that I cannot use.
I tried it on but was disappointed to find that the chin support strap is exactly the same length as on the Standard size chinstrap, while the Halo portion is huge on my head.
This is exactly the opposite of what I needed.
My face is long from top to bottom, so what I really needed was a strap that was standard size around the top of my head with an extra long strap to go down and around my chin.
It looks like I'm just out of luck. Is there not a market for chinstrap wearers with long faces?
I tried it on but was disappointed to find that the chin support strap is exactly the same length as on the Standard size chinstrap, while the Halo portion is huge on my head.
This is exactly the opposite of what I needed.
My face is long from top to bottom, so what I really needed was a strap that was standard size around the top of my head with an extra long strap to go down and around my chin.
It looks like I'm just out of luck. Is there not a market for chinstrap wearers with long faces?
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: SomniFix Mouth Strips, 20 min auto ramp, EPR, Pressure 7.0-11.0 (max average 10.4) |
Re: X-Large Halo style chinstrap up for grabs
Are you selling this chin strap?
Price?
Thanks
Price?
Thanks
-
- Posts: 121
- Joined: Wed Feb 17, 2016 10:58 am
- Location: Oklahoma
Re: X-Large Halo style chinstrap up for grabs
I would be willing to ship it to someone for $10 even.
That's half what I paid for it but I'd rather someone else be able to try it than for it to just sit in my closet.
I don't check this message board every day; however, I get a notification through email whenever someone sends a private message.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: SomniFix Mouth Strips, 20 min auto ramp, EPR, Pressure 7.0-11.0 (max average 10.4) |
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: X-Large Halo style chinstrap up for grabs
you might try a cervical collar, for me they are better than chin straps
https://www.amazon.com/Medibot-Cervical ... vical&th=1
https://www.amazon.com/Medibot-Cervical ... vical&th=1
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: X-Large Halo style chinstrap up for grabs
I'm thinking about the PapCap.
The chinstrap part is cotton and Velcro.
It might be altered or replaced easily.
The chinstrap part is cotton and Velcro.
It might be altered or replaced easily.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
-
- Posts: 121
- Joined: Wed Feb 17, 2016 10:58 am
- Location: Oklahoma
Re: X-Large Halo style chinstrap up for grabs
I'll send you my PapCap if you pm me your address. I never made it through the night with it.chunkyfrog wrote: ↑Mon Feb 11, 2019 1:25 pmI'm thinking about the PapCap.
The chinstrap part is cotton and Velcro.
It might be altered or replaced easily.
I've tried it on for 30 to 40 minutes if you add up the three times I attempted to figure it out.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: SomniFix Mouth Strips, 20 min auto ramp, EPR, Pressure 7.0-11.0 (max average 10.4) |
-
- Posts: 121
- Joined: Wed Feb 17, 2016 10:58 am
- Location: Oklahoma
Re: X-Large Halo style chinstrap up for grabs
Do you have issues sleeping on your side with this?grayghost4 wrote: ↑Mon Feb 11, 2019 9:46 amyou might try a cervical collar, for me they are better than chin straps
https://www.amazon.com/Medibot-Cervical ... vical&th=1
I'm a 95% side sleeper.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: SomniFix Mouth Strips, 20 min auto ramp, EPR, Pressure 7.0-11.0 (max average 10.4) |
Re: X-Large Halo style chinstrap up for grabs
I have seen posts from people that have used this...https://www.redbuginc.com/product/dr-da ... ck-pillow/
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is a new AS10. |
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: X-Large Halo style chinstrap up for grabs
No, I am primarily a side sleeper, and I also use a cpap pillow made with Buckwheat Hulls,weroberts75 wrote: ↑Fri Feb 15, 2019 8:35 amDo you have issues sleeping on your side with this?grayghost4 wrote: ↑Mon Feb 11, 2019 9:46 amyou might try a cervical collar, for me they are better than chin straps
https://www.amazon.com/Medibot-Cervical ... vical&th=1
I'm a 95% side sleeper.
it was made by a member on this site
https://www.cpap.com/productpage/pur-sl ... pap-pillow
I don't know what happened to him. (I hope he did not die of sleepapnea

If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual