Newbie's first SH screenshot

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
ashaper
Posts: 11
Joined: Mon Nov 19, 2018 7:48 pm

Newbie's first SH screenshot

Post by ashaper » Sat Dec 01, 2018 12:30 pm

After a great deal of mucking about I finally got a screenshot. Suggestions and comments would be appreciated. This is last nights and I was awake from about 5:30 on so the rest is not representative. My leak rate is obviously too high.

I really like the Dreamwear Nasal mask but find I get very inconsistent leak performance. Sometimes it is very good, sometimes awful. it is by far the most comfortable of the masks I have tried. The Dreamwear full face might be an option but my wife finds it much too noisy (she is very sensitive to sound).

Again, comments or suggestions would be appreciated.
screenshot-20181201-100011.png
screenshot-20181201-100011.png (227.6 KiB) Viewed 282 times

_________________
Mask
Additional Comments: Not sure which humidifier. I have the one Resmed supplies with the AirSense10 Autosense

User avatar
Okie bipap
Posts: 3567
Joined: Thu Oct 15, 2015 4:14 pm
Location: Central Oklahoma

Re: Newbie's first SH screenshot

Post by Okie bipap » Sat Dec 01, 2018 12:59 pm

Your large leak doesn't look all that bad. Your large leaks were less than 10% of the night. You bumped up against the max a couple of times. I would recommend more minimum pressue. Perhaps 10 cm. If that is too much of a jump for you, tty 9 for a few nights, then go on to 10. Once you get your minimum pressure up, you may cut off some of the events that are raising your pressure, and the 15 maximum my be just fine. Others will probably say raise the max, but I would wait to see what raising the minimum will do for you.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: IPAP 20-25, ps 4, OSCAR software
Growing old is mandatory, but growing up is optional.

User avatar
LSAT
Posts: 13342
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: Newbie's first SH screenshot

Post by LSAT » Sat Dec 01, 2018 1:34 pm

I agree with raising your minimum pressure. Many of the leaks could be from exhaling through your mouth.....try taping for a few nights to see if the leaks improve.

ashaper
Posts: 11
Joined: Mon Nov 19, 2018 7:48 pm

Re: Newbie's first SH screenshot

Post by ashaper » Sat Dec 01, 2018 1:51 pm

I’ll try raising the minimum pressure to 9 or10 cm. What is “taping”?
Thank you for your suggestions.

_________________
Mask
Additional Comments: Not sure which humidifier. I have the one Resmed supplies with the AirSense10 Autosense

User avatar
Okie bipap
Posts: 3567
Joined: Thu Oct 15, 2015 4:14 pm
Location: Central Oklahoma

Re: Newbie's first SH screenshot

Post by Okie bipap » Sat Dec 01, 2018 2:00 pm

Many people put a piece of tape across their mouth at night in order to keep air from leaking from their mouth. Some run the tape vertically, and other horizontally.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: IPAP 20-25, ps 4, OSCAR software
Growing old is mandatory, but growing up is optional.

ashaper
Posts: 11
Joined: Mon Nov 19, 2018 7:48 pm

Re: Newbie's first SH screenshot

Post by ashaper » Sat Dec 01, 2018 4:14 pm

If my mouth were completed taped I would feel like I was being abducted and claustrophobic. :roll:

_________________
Mask
Additional Comments: Not sure which humidifier. I have the one Resmed supplies with the AirSense10 Autosense

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Newbie's first SH screenshot

Post by palerider » Sat Dec 01, 2018 4:24 pm

ashaper wrote:
Sat Dec 01, 2018 12:30 pm
After a great deal of mucking about I finally got a screenshot. Suggestions and comments would be appreciated. This is last nights and I was awake from about 5:30 on so the rest is not representative. My leak rate is obviously too high.

I really like the Dreamwear Nasal mask but find I get very inconsistent leak performance. Sometimes it is very good, sometimes awful. it is by far the most comfortable of the masks I have tried. The Dreamwear full face might be an option but my wife finds it much too noisy (she is very sensitive to sound).

Again, comments or suggestions would be appreciated.

screenshot-20181201-100011.png
Couple things.. 1) do not shrink the image, post a full size, full res picture, and let the forum worry about making it fit. When you shrink it, it makes it hard to read the numbers and any detail.

2) I agree on raising the pressure, I'd say min 10, max 20.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
Pugsy
Posts: 65114
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Newbie's first SH screenshot

Post by Pugsy » Sat Dec 01, 2018 4:25 pm

Actually if those early big leaks didn't wake you up I would let them slide.
I have had worse and let them slide and there's no guarantee that they were related to mouth being open anyway.
They could easily be mask movement leaks.
The stuff that happened after 5:30 ish...toss out the window because you were awake for most of it.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

ashaper
Posts: 11
Joined: Mon Nov 19, 2018 7:48 pm

Re: Newbie's first SH screenshot

Post by ashaper » Sun Dec 02, 2018 9:58 pm

Increased min pressure from 8 to 9cm. Still have issues with leaks and mouth breathing and, I think, APH. Wife is very noise sensitive and wakes up when she hears a big leak or mouth breathing.
Last night's SH screenshot below.
Any further comments or suggestions appreciated.

screenshot-20181202-192214.png
screenshot-20181202-192214.png (101.88 KiB) Viewed 207 times

_________________
Mask
Additional Comments: Not sure which humidifier. I have the one Resmed supplies with the AirSense10 Autosense