Airfit F20 vs original Quattro sizing
- Denial Dave
- Posts: 1335
- Joined: Wed Sep 19, 2012 6:45 am
- Location: Connecticut
Airfit F20 vs original Quattro sizing
After using my Quattro FFM successfully for 5+ years, I'm considering trying out the Airfit F20. But I'm not sure about sizing.
Is a medium Quattro the same as a medium F20?
Anyone had success with the F20 with higher pressures?
My current bipap setting is 17 / 15. AHI is almost always under 1.0
Thanks Dave
Is a medium Quattro the same as a medium F20?
Anyone had success with the F20 with higher pressures?
My current bipap setting is 17 / 15. AHI is almost always under 1.0
Thanks Dave
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11 |
if you don't know where you are going... any road will take you there.... George Harrison
Re: Airfit F20 vs original Quattro sizing
I wouldn't bet on it... but you can download a sizing guide off the net, and find out for sure.Denial Dave wrote: ↑Fri Sep 21, 2018 5:04 pmAfter using my Quattro FFM successfully for 5+ years, I'm considering trying out the Airfit F20. But I'm not sure about sizing.
Is a medium Quattro the same as a medium F20?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Airfit F20 vs original Quattro sizing
Some users have reported that the differences are significant enough to
put them into a different size. YMMV, of course.
put them into a different size. YMMV, of course.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Airfit F20 vs original Quattro sizing
I have used both and found them to be the same... I always used M in the Quattro and was told that I would need a L in the F20. I tried it and found it to be too big. I exchanged it for a M and it fit fine......BUT...I didn't like it as well as the Quattro. Meanwhile, I have tried the F&P Simplus and like it a lot.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: Airfit F20 vs original Quattro sizing
LSAT, are you finding the Simplus sizing to be similar to the F20? I always take the biggest size I can get in FFMs but I'm currently trying a Simplus and it seems like the large may actually be too big.LSAT wrote: ↑Fri Sep 21, 2018 8:31 pmI have used both and found them to be the same... I always used M in the Quattro and was told that I would need a L in the F20. I tried it and found it to be too big. I exchanged it for a M and it fit fine......BUT...I didn't like it as well as the Quattro. Meanwhile, I have tried the F&P Simplus and like it a lot.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Full Face CPAP Mask with Headgear (Small and Medium Frame Included) |
Additional Comments: Pressure 11.0 Min-->14.0 Max EPR 2 |
Re: Airfit F20 vs original Quattro sizing
Here's the link to the F20 sizing pdf if you don't already have it https://www.resmed.com/us/dam/documents ... er_eng.pdf .
I use the Airfit F20 most nights. My pressures are 18/14.
I use the Airfit F20 most nights. My pressures are 18/14.
_________________
Machine: DreamStation BiPAP® Auto Machine |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Pressures: IPAP 18/ EPAP 14; Secondary mask - Nuance Pro Nasal Pillow |
Re: Airfit F20 vs original Quattro sizing
I use a M in all 3 masks without leaks Edold dude wrote: ↑Fri Sep 21, 2018 9:01 pmLSAT, are you finding the Simplus sizing to be similar to the F20? I always take the biggest size I can get in FFMs but I'm currently trying a Simplus and it seems like the large may actually be too big.LSAT wrote: ↑Fri Sep 21, 2018 8:31 pmI have used both and found them to be the same... I always used M in the Quattro and was told that I would need a L in the F20. I tried it and found it to be too big. I exchanged it for a M and it fit fine......BUT...I didn't like it as well as the Quattro. Meanwhile, I have tried the F&P Simplus and like it a lot.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: Airfit F20 vs original Quattro sizing
I switched from the mirage Quattro to the F20. I was right in between the medium and large on the Mirage Quattro. Was original given the large and found medium worked better.
On the F20 I used the sizing chart and went with the large. The mask has been great and my leak rates are way down. I also find straps easier to use and they fit better on the head
I’m at a apap pressure most nights around 15
On the F20 I used the sizing chart and went with the large. The mask has been great and my leak rates are way down. I also find straps easier to use and they fit better on the head
I’m at a apap pressure most nights around 15
_________________
Machine: Airsense 10 Card to Cloud |
Mask: AirTouch™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Also own a ResMed AirMini, Resmed AirStart 10 (backup machine) |
- Denial Dave
- Posts: 1335
- Joined: Wed Sep 19, 2012 6:45 am
- Location: Connecticut
Re: Airfit F20 vs original Quattro sizing
Thanks for all the tips
According to Resmed, the S, M & L cushions will work on the frames, but what I can't find are dimensions for the frame. There's nothing on the Resmed site regarding dimensions and CPAP.com help simply referred me back to the sizing chart. Which have never been accurate for me over the years. Which is why I have asked for help here from users.
What is still unclear to me is whether or not there's just one size frame. Or are there really 3 different sized frames for the F20?
If there's only 1 size frame, then it would appear that you simply vary the size of cushion & straps to suit your needs.
According to Resmed, the S, M & L cushions will work on the frames, but what I can't find are dimensions for the frame. There's nothing on the Resmed site regarding dimensions and CPAP.com help simply referred me back to the sizing chart. Which have never been accurate for me over the years. Which is why I have asked for help here from users.
What is still unclear to me is whether or not there's just one size frame. Or are there really 3 different sized frames for the F20?
If there's only 1 size frame, then it would appear that you simply vary the size of cushion & straps to suit your needs.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11 |
if you don't know where you are going... any road will take you there.... George Harrison
- Jas_williams
- Posts: 1120
- Joined: Tue Dec 19, 2017 2:12 pm
- Location: Somerset UK
Re: Airfit F20 vs original Quattro sizing
There is only one size frameDenial Dave wrote: ↑Sun Sep 23, 2018 8:10 am
What is still unclear to me is whether or not there's just one size frame. Or are there really 3 different sized frames for the F20?
If there's only 1 size frame, then it would appear that you simply vary the size of cushion & straps to suit your needs.
_________________
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Using sleepyhead and a pressure of 6 - 21 Resmed S9 Adapt SV with a Bleep Sleep Mask |
Re: Airfit F20 vs original Quattro sizing
AgreeJas_williams wrote: ↑Sun Sep 23, 2018 10:16 amThere is only one size frameDenial Dave wrote: ↑Sun Sep 23, 2018 8:10 am
What is still unclear to me is whether or not there's just one size frame. Or are there really 3 different sized frames for the F20?
If there's only 1 size frame, then it would appear that you simply vary the size of cushion & straps to suit your needs.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |