Air Sense 10 will not turn on
8 posts
• Page 1 of 1
-
trytryagain
- Posts: 280
- Joined: Fri Sep 03, 2010 6:28 am
Air Sense 10 will not turn on
I just went to put on my mask, and the unit will not turn on. I switched electrical outlets and it still will not turn on. I currently have a chronic sinus infection and really need my machine. Of course this is saturday of a long holiday weekend.
_________________
| Mask: Pilairo Q Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: rescan 3.11 |
-
chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Air Sense 10 will not turn on
Check all electrical connections and reseat the tank.
Feel the power brick. Is it warm?
Feel the power brick. Is it warm?
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
Re: Air Sense 10 will not turn on
I had that happen when I didn't have the water chamber in fully/correctly. Pull it out and put it back again making sure it clicks in and see if that helps.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
-
trytryagain
- Posts: 280
- Joined: Fri Sep 03, 2010 6:28 am
Re: Air Sense 10 will not turn on
No matter what I do, it won't turn on. So I thoroughly cleaned my old (s9) and made it through no problem. I actually realized I kind of miss it. Thanks for help.
_________________
| Mask: Pilairo Q Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: rescan 3.11 |
-
Wreckmster
- Posts: 15
- Joined: Mon Nov 02, 2015 10:37 pm
Re: Air Sense 10 will not turn on
I recently had the same issue with my 10mo old Air Sense 10. I took it to my DME and we tried a new power cord and it turned back on. He told me he has had a few power cords go bad on these units
_________________
| Machine | Mask | |
 |  |
Re: Air Sense 10 will not turn on
Let us know what the problem was.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
| Additional Comments: I also have a AirStart 10 |
Moderate to Severe Sleep Apnea
Airsense 10 Autoset AirStart 10 CPAP
Mirage Quattro Full Face Mask
Roger
Airsense 10 Autoset AirStart 10 CPAP
Mirage Quattro Full Face Mask
Roger
-
Hannibal 2
- Posts: 488
- Joined: Sun Nov 20, 2016 4:46 am
- Location: Derbyshire UK
Re: Air Sense 10 will not turn on
Most likely the power chord not pushed fully into the power brick, assuming there are no lights or display working?
_________________
| Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
| Additional Comments: Air 10 ClimateLineAir, SleepyHead Software |
"Welcome my son, welcome to the machine!
Where have you been? It's alright we know where you've been!"
(You've been in the pipeline...)
Where have you been? It's alright we know where you've been!"
(You've been in the pipeline...)
Re: Air Sense 10 will not turn on
I`m having the same issue. The CPAP is dead, not turning on. Your suggestion seems reasonable. You changed the whole power cord, including the power transformer? The power transformer is not with the light on.Wreckmster wrote: ↑Tue May 30, 2017 8:00 pmI recently had the same issue with my 10mo old Air Sense 10. I took it to my DME and we tried a new power cord and it turned back on. He told me he has had a few power cords go bad on these units
8 posts
• Page 1 of 1