CPAP Full Face Masks. What's your go to?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
LSAT
Posts: 13328
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: CPAP Full Face Masks. What's your go to?

Post by LSAT » Fri Mar 24, 2017 8:42 pm

lifespeed wrote:
Jasba64 wrote:Mine is the Mirage Quattro. I tried and hated the F10. I used the Simplus for over 2 months and it worked only while using a liner. I cut up T shirts for this. I don't need a liner with the Mirage Quattro. I like the forehead brace. I do however use my Mirage Quattro along with the Simplus Headgear. It works perfectly.
I like the Mirage Quattro as well. I make sure to put very little pressure on the forehead brace, however it is still useful to stabilize the mask against unwanted, leak-creating movement. The Simplus straps look nice, should spread the pressure over a wide area of the back of one's head.
Me too.....I've used the Quattro for 7 years. I've tried every new version as they came out and always went back to the basic Quattro

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: CPAP Full Face Masks. What's your go to?

Post by chunkyfrog » Fri Mar 24, 2017 9:34 pm

Rob K wrote:
chunkyfrog wrote: Manufacturers "try" to create styles that fit a greater range of faces, but many fail.
Sure would be nice if they offered us custom fitting. Although I hate to think what that would cost. In the long run it may prove to be less expensive since we wouldn't have to go through all the trial and error with several masks until we find the right one.
Rob,
I have long advocated the use of 3-D imaging of faces AND masks to help match faces to masks that best fit.
It should go across brands to do the best service; but it would certainly lower expenses--(((and profits.)))
Maybe where expense matters . . .

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

lwieland11
Posts: 249
Joined: Sat Dec 10, 2016 5:57 am

Re: CPAP Full Face Masks. What's your go to?

Post by lwieland11 » Sat Mar 25, 2017 2:38 am

I have been a Simplus fan for awhile. Was working well for me for a long time. However, since switching to BIPAP and a much higher pressure, I now have trouble with it nightly. Maybe too high a pressure I'm thinking. At 17, however, my AHI is way, way better than it was, close to 5 most nights. Not sure the doctor will lower it. But I'm not getting a good night's sleep. And not able to wear the mask more than 4 hours a night. Too frustrating fussing with the mask. I just bought a new one and used it last night. Same story, constant popping sound and re-adjusting. Finally gave up at 3:30 a.m. I spend quite a lot of time during the night adjusting and re-adjusting to get rid of the leaks, the pops, the sometimes whistling sound. I bought a heated hose to help with dry mouth. The heated hose is heavier than the regular and tends to pull at the mask, causing some of the leaks. Since the heated hose has not helped with the dry mouth, I'm considering going back to the regular hose, just because it's lighter.

I can post the Sleepyhead data, if needed to see what's going on. Not sure how to get it on here though.

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Additional Comments: AirCurve10ST

lwieland11
Posts: 249
Joined: Sat Dec 10, 2016 5:57 am

Re: CPAP Full Face Masks. What's your go to?

Post by lwieland11 » Sat Mar 25, 2017 4:13 am

Another theory I have re: the difficulty I have with mask fit. I have a number of allergies and food sensitivities. I try hard to avoid gluten as I am sensitive to it(possibly celiac)but sometimes especially if I eat out, it is not always apparent - even if you inquire - if gluten is present or if the food has been cross contaminated in the kitchen. Anyway, the result is a slightly swollen face. This has got to impact mask fit. Perhaps this explains why sometimes the mask seems to fit ok then other times not so much. Anyone else experienced this? The facial swelling due to food sensitivities/allergies...

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Additional Comments: AirCurve10ST

User avatar
Hannibal 2
Posts: 488
Joined: Sun Nov 20, 2016 4:46 am
Location: Derbyshire UK

Re: CPAP Full Face Masks. What's your go to?

Post by Hannibal 2 » Sat Mar 25, 2017 5:38 am

lwieland11 wrote:
I can post the Sleepyhead data, if needed to see what's going on. Not sure how to get it on here though.
Plenty of info on this forum on how to do this

_________________
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear
Additional Comments: Air 10 ClimateLineAir, SleepyHead Software
"Welcome my son, welcome to the machine!
Where have you been? It's alright we know where you've been!"
(You've been in the pipeline...)

User avatar
Okie bipap
Posts: 3567
Joined: Thu Oct 15, 2015 4:14 pm
Location: Central Oklahoma

Re: CPAP Full Face Masks. What's your go to?

Post by Okie bipap » Sat Mar 25, 2017 9:33 am

lwieland11 wrote:I have been a Simplus fan for awhile. Was working well for me for a long time. However, since switching to BIPAP and a much higher pressure, I now have trouble with it nightly. Maybe too high a pressure I'm thinking. At 17, however, my AHI is way, way better than it was, close to 5 most nights. Not sure the doctor will lower it. But I'm not getting a good night's sleep. And not able to wear the mask more than 4 hours a night. Too frustrating fussing with the mask. I just bought a new one and used it last night. Same story, constant popping sound and re-adjusting. Finally gave up at 3:30 a.m. I spend quite a lot of time during the night adjusting and re-adjusting to get rid of the leaks, the pops, the sometimes whistling sound. I bought a heated hose to help with dry mouth. The heated hose is heavier than the regular and tends to pull at the mask, causing some of the leaks. Since the heated hose has not helped with the dry mouth, I'm considering going back to the regular hose, just because it's lighter.

I can post the Sleepyhead data, if needed to see what's going on. Not sure how to get it on here though.
I used the simplus for several months with pressure of 20 - 25. I found the Amara View did a much better job of sealing due to my facial features. I have a very narrow bridge on my nose, and most masks that go over the nose do not seal unless I pull them tight which makes my nose sore. The Amara View fits under my nose and eliminates that problem.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: IPAP 20-25, ps 4, OSCAR software
Growing old is mandatory, but growing up is optional.

lwieland11
Posts: 249
Joined: Sat Dec 10, 2016 5:57 am

Re: CPAP Full Face Masks. What's your go to?

Post by lwieland11 » Sat Mar 25, 2017 11:21 am

Is there a mask that can handle the higher pressures better than most? Simplus is great but maybe not for the higher pressures.

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Additional Comments: AirCurve10ST

User avatar
WearyOne
Posts: 1797
Joined: Sat Mar 03, 2007 3:30 pm
Location: USA

Re: CPAP Full Face Masks. What's your go to?

Post by WearyOne » Sat Mar 25, 2017 12:00 pm

My main mask is the InnoMed/RespCare Hybrid. But I am trying out the Amara View in hopes that may work as well.

_________________
Machine: DreamStation 2 Auto CPAP Advanced with Humidifier
Additional Comments: Oscar Software | APAP: 9-10
Innomed Hybrid Mask

Rob K
Posts: 642
Joined: Sun Feb 05, 2017 5:22 pm

Re: CPAP Full Face Masks. What's your go to?

Post by Rob K » Sat Mar 25, 2017 12:35 pm

chunkyfrog wrote: Rob,
I have long advocated the use of 3-D imaging of faces AND masks to help match faces to masks that best fit.
It should go across brands to do the best service; but it would certainly lower expenses--(((and profits.)))
Maybe where expense matters . . .
Finding the right mask can certainly be a pain in the rear and maybe it doesn't have to be. 3D imaging for fitting existing masks on the market and manufacturing of custom masks. If current manufacturers wouldn't take this on it would be a way for a new business to gain market share. When you getting started?lol Sounds feasible in a quickly expanding market. Many people I know are being diagnosed with apnea.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ N10 Nasal CPAP Mask with Headgear
Additional Comments: Resmed F10 Mask for colds. When camping on battery power I use P10 mask and PR 560p machine.

lwieland11
Posts: 249
Joined: Sat Dec 10, 2016 5:57 am

Re: CPAP Full Face Masks. What's your go to?

Post by lwieland11 » Sat Mar 25, 2017 12:39 pm

Wow, I like the idea of 3D imaging for better mask fit. I can see that alone taking the difficulty out of cpap therapy. Would be amazing.

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Additional Comments: AirCurve10ST

User avatar
crestifer
Posts: 122
Joined: Wed Feb 15, 2017 7:19 pm
Location: southern illinois

Re: CPAP Full Face Masks. What's your go to?

Post by crestifer » Sat Mar 25, 2017 6:58 pm

i've had the best luck so far with 2 full face masks:

the amara view and the airfit F20.

neither have a piece that goes up between your eyes nor a piece that rests on your forehead.

i go back and forth with those two masks.

i've tried quite a few others, but those two seem to work and seal the best for me.

_________________
MachineMask
Resmed Airsense 10 Autoset_____Resmed AIRTOUCH F20 w/memory foam________11CWP prescribed CPAP.