...here I go again....

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
svo
Posts: 68
Joined: Fri Feb 26, 2016 8:21 pm

...here I go again....

Post by svo » Sun Mar 13, 2016 5:28 pm

..tomorrow I am scheduled for a second try at a tritation study....first time no good readings because I woke every hour (I think I said this before)...any advise on what should I do on my part to make sure that this time all goes ok?.....if this time fails again i will refuse a third attempt because nothing will change...as they say "repeating the same actions hoping that results will change" will always fail...i am really upset about all this study process..I know I should be cool and positive, which I am trying very hard....
This time I got to the conclusion that I will turn in bed if I so desire and the hell with "connections" and tube...last time I was not confortable and self-concious about the mask and tube and air and 2 pillows etc...so I never found a confortable position...if you tell me that this is the way in the future, I think I will revise my will.....

Ralph L...

_________________
MachineMask

User avatar
Sir NoddinOff
Posts: 4189
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: ...here I go again....

Post by Sir NoddinOff » Sun Mar 13, 2016 5:42 pm

svo wrote:..tomorrow I am scheduled for a second try at a tritation study....first time no good readings because I woke every hour (I think I said this before)...any advise on what should I do on my part to make sure that this time all goes ok?.....if this time fails again i will refuse a third attempt because nothing will change...as they say "repeating the same actions hoping that results will change" will always fail...i am really upset about all this study process..I know I should be cool and positive, which I am trying very hard....
This time I got to the conclusion that I will turn in bed if I so desire and the hell with "connections" and tube...last time I was not confortable and self-concious about the mask and tube and air and 2 pillows etc...so I never found a confortable position...if you tell me that this is the way in the future, I think I will revise my will.....

Ralph L...
Ralph, ask your doctor for an Rx for ambien (generic: zolpidem tartrate). A lot of us had to do it when we had sleep studies because it's a really unnatural sleep environment... nothing to be ashamed of and you won't be considered a 'junkie' . My sleep doctor said it's no big deal and he can factor ambien into the mix and still get a good diagnosis. He said he does that every day and it's a lifesaver for people uncomfortable with sleep labs and all that entails.

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.

Michelle-OH
Posts: 239
Joined: Sun Dec 06, 2015 2:10 pm
Location: Columbus OH

Re: ...here I go again....

Post by Michelle-OH » Sun Mar 13, 2016 6:24 pm

My sleep tech expected I might have to go for a 2nd titration visit, the first was so awful, but the doc was able to suggest a setting of 8. I felt like you, if I was going to have to go again I wasn't sure I would. Definitely ask the doc for sleep meds, my sleep center couldn't offer, you had to get them from the doc. I would suggest taking your own pillow if you didn't before. Best of luck for a good study!

User avatar
bwexler
Posts: 1587
Joined: Mon Nov 08, 2010 11:52 pm
Location: San Marcos, Ca. USA

Re: ...here I go again....

Post by bwexler » Sun Mar 13, 2016 6:42 pm

If the sleep study doesn't work out, ask for an auto CPAP. That is the minimum I would accept.
That will allow you to self titration with a little help from your doctor, DME, and a lot of help from the folks here.
Knowing what I know now, if I ever failed a sleep study I would just self titration from the start.

Fortunately both of my sleep studies were in pleasant facilities with competent techs and everything went well.

_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i

Janknitz
Posts: 8518
Joined: Sat Mar 20, 2010 1:05 pm
Location: Northern California

Re: ...here I go again....

Post by Janknitz » Sun Mar 13, 2016 7:05 pm

And once you get your own set up you can get it set up so you can toss and turn, so don't worry about having to sleep in one position for the rest of your life.

I just got a new mask that gives me so much freedom (DreamWare), combined with my homemade hose hanger and "sleep phones" for the podcasts that help me sleep. Before I had to wrestle the hose a little and switch ears for my ear bud, so this is a big improvement!
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm

svo
Posts: 68
Joined: Fri Feb 26, 2016 8:21 pm

Re: ...here I go again....

Post by svo » Sun Mar 13, 2016 7:24 pm

...thank you all..about the drug for sleeping, I will try but the study is on Monday and I will not have time to get to the doc....I will let you guys know how it went...I hope for the best..but this time not prepared for the worst...lol.....

_________________
MachineMask

User avatar
grayghost4
Posts: 1554
Joined: Wed Aug 20, 2014 6:52 pm
Location: Norther Illinois
Contact:

Re: ...here I go again....

Post by grayghost4 » Sun Mar 13, 2016 7:46 pm

call the Dr. office ... they can send an order to the sleep lab to give you a "PILL"
They have them available there
If you're not part of the solution you're just scumming up the bottom of the beaker!

Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual

User avatar
Sir NoddinOff
Posts: 4189
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: ...here I go again....

Post by Sir NoddinOff » Mon Mar 14, 2016 12:10 pm

grayghost4 wrote:call the Dr. office ... they can send an order to the sleep lab to give you a "PILL"
They have them available there
I agree, a phone call is all it takes from any of your doctors - probably even your dentist.

To other newbies out there: Try and get and test your sleeping pills way before your sleep lab appt. They work for most everybody but it's best to test them out before your sleep test and in the comfort of your own home. Like I said, they do work for most everybody but there can be exceptions. There are other Z-meds and sleeping pills besides Ambien,, so there are several ways to go. In summary, just try to find something effective BEFORE the night of your sleep test.

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.