Traveling to Greece, need help with power issues.

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
icipher
Posts: 304
Joined: Thu Oct 10, 2013 11:09 am

Traveling to Greece, need help with power issues.

Post by icipher » Mon Sep 21, 2015 10:53 am

Hello.

Tomorrow morning I am traveling to Athens and then the Greek islands for two weeks with my new bride.

I have a PR system one ASV with humidifier. I know my machine says 60 watts, but I don't know how much power the humidifier uses additionally.

Has anyone been to Greece? if so, other than a plug adapter, what else should I know regarding power consumption?

I went out to radioshack and bought a power converter that is good for up to 85 watts. Will i need this converter?

I know I procrastinated, but if anyone can give me a brief crash course on this, I would be more than grateful.

Thanks!

George.

Re: Traveling to Greece, need help with power issues.

Post by George. » Mon Sep 21, 2015 1:17 pm

All of Europe use 220V/50 H. In many stores that sales travel things WallMart included, you can buy small converter from 220 to 110. Check for how many watts you need. Nice trip.

McSleepy
Posts: 485
Joined: Fri Nov 26, 2010 10:32 pm
Location: USA

Re: Traveling to Greece, need help with power issues.

Post by McSleepy » Mon Sep 21, 2015 4:07 pm

Check the label on the back of your machine, but I'm quite sure the PRS1 supports 220V/50Hz. In this case, simply use the passive plug adapter, do not use voltage converters, as most of those will not produce a good enough waveform, especially as the power load increases, and/or may malfunction easily and damage the machine. I've successfully used my old Respironics and multiple ResMed machines all around Europe with only a plug adapter.
McSleepy

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Previous machine: ResMed S9 VPAP Auto 25 BiLevel. Mask: Breeze with dilator pillows. Software: ResScan ver. 5.1
ResMed AirCurve 10 VAuto; Puritan-Bennett Breeze nasal pillow mask; healthy, active, middle-aged man; tall, athletic build; stomach sleeper; on CPAP since 2003; lives @ 5000 ft; surgically-corrected deviated septum and turbinates; regular nasal washes

icipher
Posts: 304
Joined: Thu Oct 10, 2013 11:09 am

Re: Traveling to Greece, need help with power issues.

Post by icipher » Mon Sep 21, 2015 4:24 pm

McSleepy wrote:Check the label on the back of your machine, but I'm quite sure the PRS1 supports 220V/50Hz. In this case, simply use the passive plug adapter, do not use voltage converters, as most of those will not produce a good enough waveform, especially as the power load increases, and/or may malfunction easily and damage the machine. I've successfully used my old Respironics and multiple ResMed machines all around Europe with only a plug adapter.
McSleepy
Unfortunately, the machine doesn't say anything about the that, but the power brick says: 100-240 V- 50/60 Hz and 60 watt.

I really hope to have a definitive answer on this before I get on the plane tomorrow. Between you, radioshack and the DME I have heard 3 different stories.

User avatar
ChicagoGranny
Posts: 15189
Joined: Sun Jan 29, 2012 1:43 pm
Location: USA

Re: Traveling to Greece, need help with power issues.

Post by ChicagoGranny » Mon Sep 21, 2015 5:38 pm

icipher wrote:
PR system one ASV with humidifier

the power brick says: 100-240 V- 50/60 Hz
Universal Power

This system operates automatically between 110v and 240v AC. When traveling either inside or outside the USA, there are no switches to switch or fuses to change. The machine will automatically sense what voltage is needed and set itself to run on that power.

When traveling outside the US, the user will need to adapt the plug that goes into the wall to fit the style of outlet socket that is being used. This is simply done with a World Traveler Power Adapter Plug kit. This is the same type of plug adapter that would be used with a hair dryer or an electric shaver.

https://www.cpap.com/productpage/pr-sys ... #power-tab
See also http://www.adaptelec.com/?main_page=doc ... cts_id=145
"It's not the number of breaths we take, it's the number of moments that take our breath away."

Cuando cuentes cuentos, cuenta cuántas cuentos cuentas.